Polaris Sportsman 570 Oil Type, Capacity, Change Interval, Cost & Maintenance Guide

The Polaris Sportsman 570 is one of the most popular mid-size ATVs, powered by a 567cc single-cylinder engine designed for off-road performance, utility work, and rugged terrain riding. To keep this ATV running reliably, using the correct engine oil and following proper maintenance intervals is essential.

Because this engine operates under heavy loads, mud, heat, and low-speed torque conditions, it requires high-quality synthetic oil with strong shear stability and thermal protection.

567cc Single-Cylinder
5W-50 Synthetic Oil
ATV Heavy-Duty Engine
Off-Road / Utility Use
Frequent Service Required

Polaris Sportsman 570 Oil Type

The recommended oil type for the Polaris Sportsman 570 is PS-4 5W-50 full synthetic engine oil. This factory-approved oil is specifically designed for Polaris ATV engines and provides maximum protection in extreme riding conditions.

In mild conditions, 5W-30 synthetic oil can be used as an alternative, but 5W-50 is preferred for heavy-duty riding, towing, mud, and high-temperature environments.

Best Overall Choice: Polaris PS-4 5W-50 full synthetic oil ensures maximum engine protection and long-term reliability.

Polaris Sportsman 570 Oil Capacity

The engine oil capacity is small but must be maintained carefully. Overfilling or underfilling can cause performance issues.

Engine
Oil Capacity
Recommended Oil
567cc Single-Cylinder
2 Quarts (1.9 Liters)
PS-4 5W-50 Synthetic

Polaris Sportsman 570 Oil Change Interval

Due to harsh operating conditions, frequent oil changes are essential to protect the engine and transmission components.

Riding Condition
Recommended Interval
Normal Utility Use
Every 100 hours or 1,600 km
Heavy Off-Road / Mud / Towing
Every 50–75 hours
Severe Conditions (Dust, Water, Heat)
Every 25–50 hours

Polaris Sportsman 570 Oil Change Cost

Oil change cost depends on whether you perform it yourself or use a service center.

  • DIY Oil Change: ₹600 – ₹1,500
  • Local Workshop: ₹1,500 – ₹3,000
  • Dealer Service: ₹3,000 – ₹5,000
  • Oil + Filter Kit: Polaris OEM kit recommended for best fit

How to Change Oil in Polaris Sportsman 570

Step 1: Warm up engine for 2–3 minutes.
Step 2: Place ATV on level ground and turn off engine.
Step 3: Drain engine oil completely.
Step 4: Replace oil filter (Polaris OEM recommended).
Step 5: Refill with PS-4 5W-50 full synthetic oil.
Step 6: Check dipstick and adjust oil level properly.

Common Polaris Sportsman 570 Engine Issues

Oil Overheating

Heavy riding and mud use can increase engine temperature and oil stress.

Oil Contamination

Water or dust ingress can reduce oil effectiveness in off-road conditions.

Hard Starting in Cold Weather

Incorrect viscosity oil may cause cold start issues and sluggish performance.

Frequently Asked Questions (FAQ)

What oil does a Polaris Sportsman 570 take?

PS-4 5W-50 full synthetic engine oil is recommended.

How much oil does it hold?

Approximately 2 quarts (1.9 liters).

How often should oil be changed?

Every 100 hours or sooner in severe conditions.

Can I use 10W-40 instead of 5W-50?

Not recommended—5W-50 provides better protection for Polaris engines.

Is synthetic oil required?

Yes, full synthetic oil is required for proper engine protection.

Final Thoughts

The Polaris Sportsman 570 is built for extreme conditions, and it depends heavily on proper oil maintenance. Using high-quality 5W-50 synthetic oil and following strict service intervals will ensure long engine life and reliable off-road performance.

Quick Summary

  • Oil Type: PS-4 5W-50 Synthetic
  • Oil Capacity: 2 Quarts
  • Change Interval: 50–100 Hours
  • Best Practice: Use OEM Polaris oil for best protection