2019 Dodge Challenger Oil Type: The definitive guide is here for proud Dodge Challenger owners! This post will help you to understand the mysteries surrounding your Challenger engine oil.
I’ll cover important details like the recommended oil type And capacity, As well As the essential oil filter.
This comprehensive resource will help you ensure that your 2019 Dodge Challenger runs at its best, whether you Are A muscle-car enthusiast or A novice.
I guide you through the details of oil maintenance to ensure your Challenger is roaring along the road with precision and power.
2019 Dodge Challenger Oil Type
The recommended oil for a Dodge Challenger 2019 depends on engine size and driving conditions. Here’s the breakdown:
| Engine | Recommended Oil | Additional Notes |
|---|---|---|
| 3.6L Pentastar V6 | SAE 5W-20 full synthetic | All driving conditions are good for this product |
| 5.7L HEMI v8 | SAE 5W-20 Full Synthetic (most Conditions) | Consider 0W-40 for extreme conditions. |
2019 Dodge Challenger Oil Capacity
The oil capacity for Q 2019 Dodge Challenger is determined by the engine size, And if you include the oil filter.
| Engine Size | Oil Capacity with Filter | Oil Capacity without Filter |
|---|---|---|
| 3.6L Pentastar V6 | 5.9 Quarts (5.7 liters) | 5.3 Quarts (5.0 liters) |
| 5.7L HEMI v8 | 7 Quarts (6.6 liters) | 6.4 Quarts (6.0 liters) |
2019 Dodge Challenger Oil Filter
The size of your engine and your preferences will determine the best oil filter for a 2019 Dodge Challenger. Here’s the breakdown:
| Engine Size | Genuine Mopar Filter | Alternative Filters | Notes |
|---|---|---|---|
| All Engines Except SRT | 1AML00006A | Mobil 1 M1C-456A, Bosch 140249 (FL820S), Fram PH8940 | An all-round option that is recommended by the factory |
| HEMI Engines (4.7L-6.4L) | 4884899AC | Mobil 1 M1C-456A, Bosch 140249 (FL820S) | Filter with high capacity for long oil changes or driving that is demanding |
| SRT Hellcat and Supercharged | 5038041AA | N/A | SRT filter for high-performance applications |
| Pentastar Engines (3.0L-3.6L) | 68191349AC | Mobil 1 M1-210A, Bosch 3325, Fram PH3614 | Filtering system that is affordable and effective |
2019 Dodge Challenger Oil Change
- Place your Challenger in A level Area And apply the parking brake.
- Warm the engine for several minutes to loosen up the oil.
- It is usually located on the driver’s side, towards the front of the engine. It is located on the driver’s left side towards the front.
- The 13mm socket wrench will allow you to remove the plug from the oil drain pan. The oil will be very hot.
- Allow the oil in the pan to drain. This could take A few moments.
- With the oil filter tool, remove the old filter once the oil is drained. Please be careful not to spill any oil.
- Apply A thin coating of fresh oil on the gaskets of the new filter.
- Hand-tighten the oil filter using an oil filter wrench until it makes contact with the oil pan.
- Replace the oil plug and tighten it with a socket wrench.
- Don’t overfill. In your owner’s handbook, you should find the engine capacity for your Challenger.
- Check the oil with the dipstick. The dipstick should show the oil level between the two marks.
- Start the motor And let it idle for a couple of minutes. Check around the drain plug and oil filter for any leaks.
- Check the oil level again after you have turned off the motor. Refill if needed.
FAQs – 2019 Dodge Challenger oil type
What kind of oil does a Dodge Challenger take?
The 2022 6.4L Dodge Challenger requires 7 quarts (6.6 liters) of 0W-40 oil with a filter. You can use synthetic engine oils if they meet the required oil quality standards and you maintain the recommended oil and filter change intervals. Avoid using engine oils lacking the necessary SAE viscosity grade number and engine oil certification mark.
Should you buy a 2022 Dodge Challenger?
The 2022 Dodge Challenger is a throwback not just because of its vintage feel, but also because some versions are really entertaining. The entry-level V-6 model is the cheapest way to become a member of the Brotherhood of Muscle—the only two-door muscle car with all-wheel drive.
What kind of oil should I use in my Mopar?
The manufacturer recommends the use of Pennzoil Ultra Platinum 0W-40 or equivalent Mopar engine oil meeting the requirements of FCA Material Standard MS 12633 for use in all operating temperatures. The engine oil filter should be replaced with a new filter at every engine oil change
Conclusion
For your Dodge Challenger 2019, choosing the right type of oil is vital to maintaining its performance And durability.
The recommended oil types for the 2019 Dodge Challenger 3.6L V6 engines are fully synthetic 5W-20. You must use high-quality oil And replace it regularly to prevent engine issues.
I hope this guide answers all your questions about the 2019 Dodge Challenger’s type of oil, filter capacity, And change cost.
You’re welcome, and enjoy your driving!