2017 Yukon XL Oil Type, Capacity, Filter, & Change Cost

2017 Yukon XL Oil Type: Maintain your 2017 Yukon XL with regular oil changes for peak performance and longevity. Learn about the right oil type, quantity, and filter for your vehicle.

This article will be able to answer every one of those questions and additional questions! I’ll also provide the necessary information for changing your Yukon XL’s oil on your own. If you’re a veteran DIYer or just a novice, we’ve got you covered.

Here’s a brief overview of the most important takeaways from the article

• Type of oil: GMC recommends using an all-synthetic 5W-30 oil for your 2017. Yukon XL.
• Capacity of oil: The 2017 Yukon XL comes with a capacity of 8 Quarts and a filter.
• The oil filter: GMC advises you to use an ACDelco PF46 oil filter until 2017. Yukon XL.
• Cost of oil change: The average cost of changing the oil in 2017. Yukon XL is between $85 and $104.

Continue reading to find out more about choosing the best oil to fit your Yukon XL, how to change your oil yourself, and where you can find the most affordable prices for oil adjustments!

2017 Yukon XL Oil Type

The recommended oil from GMC to be used in the 2017 Yukon XL is a synthetic oil with a viscosity of 5W-30. 

Synthetic oil provides better protection from wear and tear and can help to increase the efficiency of your fuel.

Here are a few examples of synthetic oils you could make use of in the Yukon XL for 2017. Yukon XL:

• Mobil 1 Full Synthetic Advanced Fuel Economy Motor Oil 5W-30
• Castrol Edge Advanced Full Synthetic Motor Oil 5W-30
• Valvoline Advanced Full Synthetic Motor Oil 5W-30
• The Pennzoil Platinum Premium Full Synthetic Motor oil 5W-30
• AMSOIL Signature Series 5W-30 Synthetic Motor Oil

If you’re not sure which kind of oil to apply to the Yukon XL, it is always recommended to refer to the owner’s manual or talk to an experienced mechanic.

2017 Yukon XL Oil Capacity

The capacity of oil in 2017. Yukon XL depends on the engine type:

• 5.3L V8 engine 8 Quarts (with filter)
• 6.2L V8 engine 8.1 Quarts (with filter)

It is important to note that these capacities are estimates but the amount of oil needed could depend on the specific vehicle. Always refer to the owner’s guidebook for the exact capacity of oil for your vehicle.

2017 Yukon XL Oil Filter

Here is a list of some popular oil filter brands for a 2017 Yukon XL:

• ACDelco PF63
• Fram PH10575
• Mobil 1 M1-212A
• K&N HP-2004
• Wix 57578

When you are choosing one of the oil filters, it’s essential to select an oil filter which is compatible the car’s engine and viscosity. 

You can refer to your owner’s manual, or the website of the manufacturer of your oil filter to find the right oil filter for your car.

2017 Yukon XL Oil Change

If you want to change your oil for the Yukon XL, 2017 Yukon XL, follow these steps:

1. Place the vehicle on an even surface.
2. Switch off your engine, and allow it to sit for a few minutes to cool.
3. Lift the hood, and then locate the cap for filling up with oil.
4. The cap on the oil filler must be removed and place it in a safe place.
5. Install a drain pan underneath the drain plug for oil.
6. Use a wrench for loosening the plug that drains oil.
7. Let the oil run off to the pan for draining.
8. After the oil has been drained then replace the drain plug, and then tighten the bolt up with the help of a wrench.
9. Clean your old filter.
10. Apply a thin layer of fresh oil on that gasket on the oil filter that has been replaced.
11. Install the new filter with your hands until it’s secure.
12. Inject new oil into the engine via the neck of the oil filler.
13. Replace the cap that holds the oil.
14. Begin the engine, and allow it to run for a couple of minutes.
15. Make sure the oil is at the right level, and add oil, if necessary.
16. Turn off the engine, then cover the front of your hood.

People Also Search the 2017 Yukon xl oil type

Conclusion

The recommended type of oil for the Yukon XL is SAE 0W-20 or 5W-20 synthetic motor oil. This oil type is designed to shield your engine from all kinds of weather as well as driving situations.

Thank you for taking the time to read this article! I hope that you found it interesting. In case you have any queries about the types of oil or modifications, please do not hesitate to contact me. I’m always here to assist you.

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – 2017 Yukon XL oil type

How many quarts of oil does a 2017 GMC Yukon take?

How many quarts of oil does a 2017 GMC Yukon take? The 2017 GMC Yukon takes quarts of oil. Having high-quality oil is key for the engine to run smoothly.

What kind of oil does the Yukon take?

The Yukon comes with two different engines, one is a 5.3 L V8 and the other is a 6.2 L V8. The 6.2 is only available with the Denali trim package. Both engines use the same type and amount of oil, 8 quarts of full synthetic 0W-20. Choosing the right oil and filling the vehicle with the correct amount will prevent premature wear on the engine.

What happens if you don’t replace the oil in a Yukon?

If You don’t replace it, there will be problems with the engine. The Yukon comes with two different engines, one is a 5.3 L V8 and the other is a 6.2 L V8. The 6.2 is only available with the Denali trim package. Both engines use the same type and amount of oil, 8 quarts of full synthetic 0W-20.

How many quarts of oil does a Denali take?

The 6.2 is only available with the Denali trim package. Both engines use the same type and amount of oil, 8 quarts of full synthetic 0W-20. Choosing the right oil and filling the vehicle with the correct amount will prevent premature wear on the engine.