2014 Mitsubishi Outlander Oil Type, Capacity, Filter, & Change Cost

2014 Mitsubishi Outlander Oil Type: Keeping your 2014 Mitsubishi Outlander running smoothly requires regular maintenance and oil changes are at the top of the list.

Choosing the right oil, knowing its capacity, And understanding the filter and change costs can help you make informed decisions and keep your vehicle in top shape.

This guide, compiled from official sources And updated with the latest information, provides a comprehensive breakdown of everything you need to know about 2014 Outlander oil changes.

2014 Mitsubishi Outlander Oil Type and Capacity

The recommended oil type for your 2014 Outlander depends on your engine size And driving conditions. Here’s A table for easy reference:

The oil filter plays a crucial role in capturing engine contaminants. Always use the manufacturer-recommended filter for optimal performance And protection. For your 2014 Outlander, the recommended oil filter part number is MZ690072.

2014 Mitsubishi Outlander Oil Change Cost

The cost of an oil change for your 2014 Outlander can vary depending on several factors, including:

• Location: Labor rates and parts prices can differ significantly between regions.
• Oil type: Synthetic oil is typically more expensive than conventional oil.
• Shop type: Dealerships may charge more than independent mechanics.
• DIY vs. professional: Doing the oil change yourself can save money, but requires time and proper tools.

As a general estimate, expect to pay between $72 and $110 for a basic oil change at an independent mechanic, and between $91 and $120 at a dealership.

2014 Mitsubishi Outlander Oil Change 

1. Place your Outlander on a level surface, and turn on the brake for parking.
2. Lift the hood, and find the drain plug for oil on the lower part of the oil pan. It’s usually a 17mm or 14mm bolt.
3. Place the drain pan for oil beneath the plug for draining.
4. Release the drain plug using the socket wrench, and let the oil drain completely. Be cautious that you don’t burn yourself with the hot oil.
5. When the oil is gone down, take out the old filter. It is possible to make use of an oil wrench to do this.
6. Apply a thin coating of clean oil on the gasket of the brand-new oil filter.
7. Install the new filter with your hands until it’s snug and then tighten it 1/4 turn using the wrench for oil filters.
8. Install a new drain pipe, and make sure you tighten it to the required torque (consult the owner’s manual).
9. Inject the new oil and stop to monitor the dipstick’s level regularly. The Outlander’s engine capacity is 4.9 quarters.
10. The engine should be started and allow it to run for a couple of minutes. Then, switch off the engine and test the level of oil. Make sure to add more oil until the level is near the maximum mark on the dipstick.
11. Clean up the oil that has been used and clean it properly.

FAQs – 2014 Mitsubishi Outlander oil type

How much oil does the 2014 Mitsubishi Outlander Sport SE take?

According to our sources, oil, coolant, and fuel capacity for this version of the 2014 Mitsubishi Outlander Sport SE are as follows: Engine lubricant oil capacity: 4 liter / 4.2 U.S. qt / 3.5 imp.

Should you buy a 2021 Mitsubishi Outlander Sport?

Mitsubishi charges just over $24,000 for the basic model; the gorgeous Mazda CX-30 and cool Hyundai Kona both start at $23,000 or less. Aside from good looks, all-wheel drive, and a solid engine warranty, there’s not much to like about the 2021 Outlander Sport—unless consumers adore the brand. Oil pan drain plug tightening torque: 26-32 ft/lbs.

Is it OK to change the engine oil to 0W-20?

However, it must be changed with 0W-20 at the next oil change. The engine’s performance, repair duration, and stability are all influenced by the type of oil used. Make sure you use the right oil in the correct quantity to preserve your vehicle’s performance, service life, and startup ability.

People Also Searches the 2014 Mitsubishi Outlander oil type

For more posts visit our website: https://engineoiil-capacity.com/