2013 F150 Ecoboost oil type: Ensure that the 2013 F150 Ecoboost gets the right maintenance for its oil is vital to ensure its longevity and maximum performance.
This guide will go over the important specifics of the type of oil capacity, filter size And the cost of changing it to ensure your vehicle is running as new.
Capacity and Type of oil: For the 2013 F150 Ecoboost model, Ford suggests using SAE 5W-20 motor oils made of synthetic mixtures.
This particular oil type offers the Best security against wear and tear assuring the smooth operation of your engine and a longer lifespan of the engine. The capacity of engine oil for your vehicle is 7.7 Quarts.
Oil Change Price: The cost for an oil change for 2013 F150 Ecoboost varies between $60 and $120. This price can vary based on location And the type of oil used, And the cost of labor.
If you’re looking for a way to save money it is possible that you can look into doing your own oil changes. But, it’s important to follow the guidelines and utilize the right equipment and tools.
2013 F150 Ecoboost oil Type
The recommended engine oil type for a 2013 Ford F-150 with a 3.5L EcoBoost engine is a 5W-30 full synthetic oil.
This type of oil is designed to meet the specific needs of EcoBoost engines, which run at higher temperatures than traditional engines.
Full synthetic oil also provides better protection against wear and tear, which can help to extend the life of your engine.
Here are some specific recommendations for 5W-30 full synthetic oil for a 2013 Ford F-150 with a 3.5L EcoBoost engine:
| Oil Brand | Type |
|---|---|
| Motorcraft | Full Synthetic 5W-30 |
| Valvoline | Full Synthetic 5W-30 |
| Mobil 1 | Full Synthetic 5W-30 |
| Castrol Edge | Full Synthetic 5W-30 |
| Pennzoil Platinum | Full Synthetic 5W-30 |
2013 F150 Ecoboost Oil Capacity
The oil capacity for a 2013 Ford F-150 Ecoboost is 6.0 quarts (5.7 liters) with an oil filter change. This is the same oil capacity for all 2011-2014 F-150 Ecoboost models.
Here is a table of oil capacities for all 2013 F-150 engines:
| Engine | Oil Capacity (quarts) |
|---|---|
| 3.5L Ecoboost | 6.0 |
| 3.7L V6 | 6.0 |
| 5.0L V8 | 7.7 |
| 6.2L V8 | 7.0 |
2013 F150 Ecoboost Oil Filter
The most recommended oil filter for 2013 F150 Ecoboost is the Motorcraft FL-820S. This filter is made specifically to meet the needs for the Ecoboost engine And will ensure the best protection for the engine oil.
These filters are constructed from top-Quality materials And will give you a good shield for the engine oil. The Motorcraft FL-820S is the Best filter to use for this engine.
Here is a table listing the Specifications for oil filters of the F150 Ecoboost 2013 model model:
| Filter | Part Number | Capacity | Bypass Valve |
|---|---|---|---|
| Motorcraft FL-820S | FL-820S | 10.6 quarts | Yes |
| K&N HP-2011 | HP-2011 | 12.4 quarts | Yes |
| Wix 51335 | 51335 | 10.6 quarts | Yes |
| Fram PH8A | PH8A | 12 quarts | Yes |
| Mobil 1 M1-108A | M1-108A | 12 quarts | Yes |
2013 F150 Ecoboost Oil Change
Changing the oil in the 2013 F150 Ecoboost is a simple procedure. You can follow these steps to complete the job yourself
Collect the Tools and Materials: Before beginning the process of changing your oil make sure you’ve got the tools and supplies you need such as the socket wrench, an oil filter wrench a new funnel, a filter for oil, as well as the right size and type of oil.
Get the vehicle ready: You should park your car on a flat surface, then activate the brake for parking. Allow the engine to cool for a short time before moving on.
Remove the Old Oil: Look for the drain plug underneath the engine and put an oil pan underneath it. The drain plug should be removed and the old oil to completely drained.
Change the oil filter: Get rid of the old filter by using the wrench for oil filters. Then swap it for a fresh one. Be sure to grease the gasket with a small amount of fresh oil prior to installing the filter.
Add New oil: Take off the cap that holds the oil on at the top of your engine. employ a funnel to pour into the fresh oil. Check the owner’s manual to determine the recommended capacity of oil.
Get rid of the old Oil in the correct way: Bring the old oil to a recycling facility or an auto parts shop to dispose of it properly. Make sure to not flush it into the toilet or throw it in the garbage.
People Also Searched 2013 F150 Ecoboost oil type
| See full list on davesoilchange.com |
| ford f150 ecoboost oil recommendation |
| recommended oil for f150 Ecoboost |
| 2013 f150 Ecoboost oil specs |
| recommended oil for ford f150 |
| 2013 ford f 150 oil capacity |
| oil capacity 2013 f150 EcoBoost |
| 2013 f150 oil capacity |
| 13 f150 5.0 oil capacity |
Conclusion
Making the Best choice of oil for the 2013 F150 Ecoboost can BE an Essential step to maintaining the engine’s performance And durability.
Be aware of the points mentioned earlier in Conjunction with The guidelines of the manufacturer for changing the oil intervals in order to keep your engine operating Smoothly.
Regular oil changes as well as proper maintenance will make sure that your vehicle will provide you with a long-lasting service for many years to Come.
For more posts visit our website: https://engineoiil-capacity.com/
FAQs – 2013 f150 ecoboost oil type
What type of oil does a 2013 Ford F-150 take?
For all 2013-2014 Ford F150 vehicles, 5W-20 is the best type of oil. It’s unsafe to use anything heavier than 5W-20 because it could result in severe consequences.
All Ford F-150s manufactured from 2004 to 2014 take this type of oil. The exception is Ford F-150 with an Ecoboost 3.5L V6 engine which needs the slightly heavier – 5W-30 oil.
What kind of EcoBoost does a 2013 Ford F-150 have?
Home F150 Info & Specs 2013 F150 3.5L EcoBoost Information & Specifications 2013 F150 3.5L EcoBoost Information & Specifications 2013 F150 3.5L EcoBoost Information & Specifications 2013 F150 EcoBoost Overview The basic formula stayed the same for the 2013 F150 EcoBoost trucks: 10th Generation F150 Body Style + 3.5L EcoBoost V6 = loads of awesome.