2014 Nissan Altima Oil Type: If you have a 2013 Nissan Altima, it’s important to understand the proper type of oil capacity, filter, And cost for changing to ensure that your car runs smoothly.
In this article, I’ll cover all you must know about maintaining the oil in your Nissan Altima. From the suggested synthetic oil type to The best capacity of the oil And the filter options, I’ll get you covered.
Additionally, I’ll go over the costs associated with changing your oil and offer some guidelines to help you save Money.
Nissan Altima 2014 Oil Type
The recommended oil for 2014. Nissan Altima may vary depending on the engine type that you have installed in the vehicle.
For the typical 2.5L four-cylinder engine Nissan advises 5W-30 viscosity oils. If you have a 3.5L V6 engine the recommended oil is 5W-30.
2014 Nissan Altima Oil Capacity
Here’s the oil capacity for 2014. Nissan Altima with both the 2.5L 4-cylinder engine as well as the 3.5L V6 engine:
| Engine | Capacity for Oil (with filter) |
|---|---|
| 2.5L 4-cylinder | 4.9 quarts (4.6 liters) |
| 3.5L V6 | 5.1 quarts (4.8 liters) |
Note that these figures are approximate, and it’s recommended to consult your vehicle’s owner’s manual to get the most current and accurate information.
2014 Nissan Altima oil Filter
This is a basic overview of 2014. Nissan Altima oil filter:
| Engine | Filter Type | Brand | Part Number | Additional Notes |
|---|---|---|---|---|
| 4-cylinder (2.5L QR25DE) | Standard | FRAM | PH7317 | |
| 4-cylinder (2.5L QR25DE) | High-Performance | K&N | HP-1017 | |
| 4-cylinder (2.5L QR25DE) | Premium | Wix | 51356XP | Extended drain intervals |
| V6 (3.5L VQ35DE) | Standard | FRAM | PH9317 | |
| V6 (3.5L VQ35DE) | High-Performance | K&N | HP-3001 | |
| V6 (3.5L VQ35DE) | Premium | Wix | 57356XP | Extended drain intervals |
2014 Nissan Altima Oil Change
These are the steps you need to follow to alter the oil of the 2013 Nissan Altima based on the results of a search:
- Start the engine by warming: it up by starting the engine. allow it to run for a short period to warm the oil. This will allow the oil to flow more freely as you empty it.
- Lift the car: using a jack. raise the front of the car, and then place stand-up jacks under the frame.
- Remove the oil: Find the drain plug in the base of the pan. Remove it with a wrench. Let the oil fully drain into the drain pan.
- Install new oil: Install the drain plug, then fill it with the amount recommended for new oil. For 2014. Nissan Altima with a QR25DE engine, the oil capacity is 4.8 Quarts (4.6 milliliters) from SAE 5W-30 oils. For the 2013 Nissan Altima with a VQ35DE engine, the capacity of oil is 5.1 quarters (4.8 Liters) of SAE 20W-20 oil. Verify the level of oil using the dipstick and add oil if required.
- Start the engine: allow it to run for a couple of minutes. Look for any leaks in the drain plug and oil filter. plug.
- Reset the light for oil maintenance: Follow the steps in the owner’s guide for your car to reset the oil maintenance light.
You should change your oil on the 2013 Nissan Altima every 3,000-5,000 miles for conventional oil, and more frequently for synthetic. Always refer to your vehicle’s owner’s manual, or a reputable mechanic for the most up-to-date and up-to-date information about maintenance and oil changes specific to your car.
People Also Search what type of oil a 2014 Nissan Altima used
| See all 27 rows on 21cylinders.com |
| 2014 nissan altima recommended oil |
| 2014 nissan altima oil weight |
| 2014 nissan altima oil capacity |
| oil for the 2014 nissan altima |
| 2015 nissan rogue oil weight |
| 2015 nissan altima oil recommended |
| 2017 nissan maxima oil weight |
| 2016 nissan juke oil type |
Conclusion:
It’s critical to choose the right oil for your 2014 Nissan Altima to ensure peak performance and longevity. Although most cars can use regular oil, synthetic oil offers better performance and protection.
Consult the owner’s manual or speak with a dependable mechanic if you’re unsure of the best type of oil for your Altima. Never forget to use the recommended oil type to avoid any possible engine damage.
For more posts visit our website: https://engineoiil-capacity.com/
FAQs – 2014 Nissan Altima Oil type
What kind of oil does a 2014 Nissan Altima take?
What kind of oil does the 2014 Nissan Altima take? Nissan recommends the use of original NISSAN engine oil or equivalent with API certification marks for the Altima-SAE 5W-30 for the 3.5L engine and 0W-20 for the 2.5L engine. The SAE 0W-20 is fully synthetic oil, while the 5W-30 is conventional oil.
What is the Nissan Altima 2019 oil control system?
The Nissan Altima 2019 is equipped with an oil control system. It calculates engine oil and filter change intervals based on driving conditions. Driving in difficult conditions shortens the engine oil and filter change interval.
What type of oil does a Nissan use?
The use of 0W-20 engine oil is one of the factors contributing to improved fuel economy in newer Nissan models. The exclusive blend of original Nissan oil is only available from your Nissan dealer and is covered by a warranty.
What kind of oil does a 2013 Nissan Frontier take?
Most 2013 and later Nissan models are factory-filled with original Nissan 0W-20 engine oil. This high-performance lubricant was made and made to work with the vehicle’s performance in mind. The use of 0W-20 engine oil is one of the factors contributing to improved fuel economy in newer Nissan models.
What is the best oil type for 2014? Nissan Altima?
The oil type recommended for the 2014 Nissan Altima depends on the engine model. If you have a 2.5 LG QR25DE engine SAE 5W-30 is recommended but SAE 10W-30, or SAE 10W-40 oils could be employed. In those with the 3.5 L VQ35DE V6 engine, SAE 5W-30 viscosity oils are the preferred choice, however, SAE 10W-30 and SAE 10W-40 viscosity oils are also available.