2010 F150 5.4 Oil Type, Capacity, Filter & Change Cost

2010 F150 5.4 Oil Type: It’s important to maintain the right capacity and change the oil filter regularly in order to ensure optimal performance for your 2010 F-150. 

Oil type 5W-20 is recommended for the 2010 F-150. Oil filter replacement is recommended with each oil change. The engine oil capacity for the 2010 F-150 5.4 is 7 quarts. 

The price of an oil-change for the 2010 F-150 can vary depending on where you live and what type of oil filter is used. 

The average cost of a standard oil-change using conventional oil with a basic filter is between $50 and $70. Consult your local auto service center or dealership for a more accurate estimate.

The preferred oil type for the 2010 F150 with a 5.4L engine is 5W-20 motor oil, meeting Ford specifications WSS M2C930-A or WSS M2C945-.

This recommended oil ensures optimal engine performance and durability. Selecting high-quality oil designed to protect your engine and provide optimal lubrication is essential.

Additionally, it’s advisable to frequently monitor the oil level and adhere to the manufacturer’s suggested oil change intervals to maintain high-speed engine operation.

Capacities for 2010 Ford F150 Engines

The Ford F150 with a 5.4L engine can hold up to 7 quarts (6.6 liters) during an oil and filter replacement.

To maintain maximum vehicle performance And longevity, it’s crucial to choose the appropriate oil type And quantity.

Recommended for this engine is 5W-20 motor oil, a synthetic blend meeting Ford specifications WSS-M2C930-A and WSS-M2C9.

Additionally, ensure you select a high-quality oil filter compatible with your vehicle’s engine, consulting the owner’s manual for specific requirements. Regularly check the oil level and top up as needed to prevent engine damage from low oil levels.

2010 f150 5.4 oil filter

The 2010 F150 with a 5.4L engine offers various oil filters tailored to the vehicle model and engine code. Popular options are Motorcraft FL-820S, Fram PH2, and K&N HP-2011.

Choose the highest-quality oil filter for proper filtration and engine protection. Consult the owner’s manual or a certified mechanic to select the right oil filter for your 2010 F150.

2010 F150 5.4 oil change

It appears that you are looking for information on the procedure of changing the oil in a 2010 F150 equipped with a 5.4 Liter engine. Following are the procedures required to conduct an oil change on this model:

1.  Ensure you have the proper equipment, including the correct type and quantity of oil, an oil filter, a drain container, and a socket or spanner set.
2. Find the drain plug to the oil beneath the vehicle. It should be at the side of the oil pan.
3. Place the drain pan under the drain plug, and then make use of the socket or wrench used to unlatch the drain plug, and let the old oil run out.
4. When the oil is draining Find the oil filter. It should be located close to the pan for oil. Utilize an oil wrench to remove and loosen the old filter.
5. The oil filter gasket should be lightly oiled before being manually screwed into place.
6. When the old oil is been drained, replace the drainage plug, and then tighten the bolt up to the torque specifications recommended by the manufacturer.
7. Verify that the engine is topped up with the right amount and kind of oil, as specified in the owner’s handbook. Don’t overfill the engine, please.
8. Start the engine, and then let it run for a few minutes. After that, check the oil level and add more if necessary.
9. Then, get rid of the old filter and oil in a proper manner. A lot of auto parts stores or service centers accept old filters and oil for recycling.

This should provide the fundamental steps to perform the oil replacement on a 2010 F150 equipped with a 5.4 Liter engine. 

People Also Searches 2010 f150 5.4 oil type

Conclusion:

The right oil to use for the 2009 F150 5.4 is crucial for keeping your engine running smoothly. If you choose to use the full-synthetic blend, or synthetic blend ensure that you follow the recommendations of the manufacturer for oil intervals for change.

Monitoring your oil levels regularly and changing them if needed can help keep your vehicle in good condition.

If you follow these guidelines make sure the 2010 F150 5.4 remains in the roadway for many years to come.

For more posts visit our website: https://engineoiil-capacity.com/

FAQ 2010 f150 5.4 oil type

What kind of oil does a 2010 Ford F-150 take?

What is the oil type and capacity of the 2010 Ford F-150? Ford recommends Motorcraft 5W-20 synthetic blend motor oil for the 2010 F-150. 

What kind of oil does a 2004 Ford F150 take?

Amazon’s Home brand motor oil has managed to secure its fair share of trust among car owners. AmazonBasics full synthetic has outperformed many big brands in the motor oil industry, and it is cheaper than most of the brand oils.

How many quarts of oil does a Ford F-150 take?

Regardless of your choice, it is essential to ensure that you have the precise amount of oil recommended by the manufacturer. The 2-valve and 3-valve versions of the 4.6L V8 engine have a capacity of 6 quarts.

In contrast, the 5.4L V8 engine can accommodate an extra quart, totaling seven quarts due to its larger displacement. Is the 2010 Ford F-150 the ideal truck for your needs?

What is the best oil for high mileage Ford F150?

It can considered one of the best oils for high-mileage Ford F150. It meets the manufacturer quality standards recommended for the 5.4 Triton, too.

Pennzoil has introduced some quality motor oil that has a perfect combo of performance and economy. There have been excellent reviews from users of Pennzoil platinum 5.7 Hemi and 5.4 Triton.