e 2007 Jeep Wrangler Oil Type And Capacity: The 2007 Jeep Wrangler is a rugged and solid off-road vehicle that requires regular maintenance to keep operating smoothly.
A single of the most crucial elements of maintenance on your vehicle is replacing the engine oil on a regular basis. However, deciding on the correct oil kind for your Jeep can appear to be an overwhelming job.
Here, we will aid you to understand the various types of oil and assist you select the right oil kind suitable for your 2007 Jeep Wrangler.
2007 Jeep Wrangler Oil Type
The type of oil recommended for the 2007 Jeep Wrangler depends on the engine type. To use those running the 2.4L 4-cylinder engine Chrysler suggests using either 5W-20 or oil that is certified to meet API certification and is in compliance with Chrysler MS-6395, the Material Standard.
In the case of for the 3.8L V6 engine, Chrysler advises 5W-20 and 5W-30 as motor oils that meet the mark of API certification and is compliant with Chrysler Material Standard MS-6395.
It’s essential to always consult your owner’s manual to get up-to-date and accurate details on the recommended type of oil and intervals to change it for your particular vehicle.
2007 Jeep Wrangler Oil Capacity
The oil capacity of the 2007 Jeep Wrangler with the 2.4L 4-cylinder engine is roughly 4.0 4 quarts (3.8 liters) after a filter change.
The capacity of the oil in the 2007 Jeep Wrangler with the 3.8L V6 engine is about 6.0 Quarts (5.7 liters) when a filter is changed.
It is crucial to constantly refer to your owner’s handbook to get the most current and correct details on the oil capacity for your specific vehicle.
Recommended Oil Types for 2007 Jeep Wrangler
There are three primary kinds of oil for Jeep Wrangler in 2007. There are three main types of oil available for the Jeep Wrangler: conventional oil synthetic blend oil fully synthetic oil. Here’s the information you should be aware of about each:
Conventional Oil
Conventional oil is the most basic kind of oil. It is constructed from crude oil. It is the most affordable kind of oil however it requires more frequent replacements as compared to synthetic oil.
Conventional oil is suggested for older vehicles that have high mileage or who live in warm temperatures.
Synthetic Blend Oil
Synthetic Blend oil is an amalgamation of traditional and synthetic oil. It offers more performance than conventional oils and is suggested for vehicles that work in high temperatures and with high loads.
Synthetic blend oil can also provide more efficient performance and fuel efficiency, as well as protection for the engine.
Full Synthetic Oil
Fully synthetic oil is the most sophisticated type of oil and is composed of 100% synthetic components.
It offers the most performance and protection for engines and requires fewer oil changes than conventional oils.
The full synthetic oils are advised for vehicles with high performance as well as those operating in high temperatures, or with the pressure of heavy load.
How to Choose the Right Oil Type for Your 2007 Jeep Wrangler
Selecting the correct oil to use on your 2007 Jeep Wrangler depends on several variables, including the condition of your automobile,
the environment the climate you drive in the weather you drive in, and the driving habits you have. These are some suggestions to assist you select the right oil kind suitable for your Jeep:
Check your owner’s manual The company that makes the product of your car will recommend a particular type of oil for your Jeep. Make sure you are using the right oil by consulting your owner’s manual.
Think about your driving habits Consider your driving habits: If you often travel in extremely cold temperatures, or with massive loads synthetic blend or full synthetic oils may be the best option to use on your Jeep. If you operate in mild climates or have an old vehicle that has high mileage, regular oil may suffice.
Select the correct viscosity Make sure to consult your owner’s manual to determine what is the suggested level of oils to use on your Jeep. Selecting the wrong oil can cause the engine to be damaged or decrease performance.
2007 Jeep Wrangler Oil Filter
The oil filter that is used in the 2007 Jeep Wrangler with the 2.4L 4-cylinder engine is an ordinary spin-on filter. In Thoil filter recommended that is suitable for the engine is the Mopar MO-090 or a comparable filter.
The oil filter on the 2007 Jeep Wrangler with the 3.8L V6 engine is also the standard spin-on type. The most recommended oil filter that is suitable for the engine is the Mopar MO-090 or an equivalent filter.
It’s essential to select the highest-quality oil filter which is suitable for your engine in order to provide proper protection against contamination and filtration.
Always consult your owner’s manual, or consult an expert mechanic for advice in selecting the best engine oil filter that is compatible with your vehicle.
2007 Jeep Wrangler Oil Change
The recommended interval for oil changes for the 2007 Jeep Wrangler is every 6 months or the equivalent of 6,000 miles (9,656 kilometers) or when it’s the first.
It’s crucial to remember that your driving habits and conditions can alter the life of your oil. and you may have to change it more often when you often use your vehicle in high temperatures or in dusty or filthy environments or participate in extreme Towing or Off-Roading.
For the oil change on the 2007 Jeep Wrangler, follow these steps:
- Get the engine warmed up by running it for some time or letting run for a couple of minutes.
- Lift the vehicle with a jack stand or an elevator, and make sure that the vehicle is supported properly.
- Locate the drain plug under the vehicle. Use the wrench to pull it loose. The old oil should be drained into the container and disposed of it in accordance with local rules.
- Clean your old filter, and replace it with an appropriate replacement filter.
- Change the plug, and then ensure that it is tightened according to the manufacturer’s recommended specifications.
- Inject the recommended amount and the type of new oil by using the cap for filling oil normally found in the cover of your valve.
- Start the engine, and let it run for a couple of minutes to circulate new oil.
- Shut off the engine, and then test the level of oil with the dipstick. You can add more oil as necessary to attain the desired level.
- lower the engine and remove the old oil and filter in a proper manner.
Always consult your owner’s guidebook or consult an authorized mechanic for advice on how to perform maintenance and oil change on your particular vehicle.
Jeep Wrangler, JK (2007 – 2018) (USA / CAN)
|
 | 1 | 2 | 3 |
|---|---|---|---|
| Wrangler 3.6 (2012 – 2013) | Pentastar | 5.6 | 13 000 km/ 6 months |
| Wrangler 3.6 4×4 (2012 – 2013) | Pentastar | 5.6 | 13 000 km/ 6 months |
| Wrangler 3.6 (2013 – 2013) | Pentastar | 5.6 | Use: Flexible (max) 12 000 km/ 12 months Use: Severe 7 500 km/ 12 months |
| Wrangler 3.6 4×4 (2013 – 2015) | Pentastar | 5.6 | Use: Flexible (max) 12 000 km/ 12 months Use: Severe 7 500 km/ 12 months |
| Wrangler 3.6 4×4 (2015 – 2018) | Pentastar | 5.6 | Use: Flexible (max) 12 000 km/ 12 months Use: Severe 7 500 km/ 12 months |
| Wrangler Unlimited 3.6 (2012 – 2013) | Pentastar | 5.6 | 13 000 km/ 6 months |
| Wrangler Unlimited 3.6 4×4 (2012 – 2013) | Pentastar | 5.6 | 13 000 km/ 6 months |
| Wrangler Unlimited 3.6 (2013 – 2013) | Pentastar | 5.6 | Use: Flexible (max) 12 000 km/ 12 months Use: Severe 7 500 km/ 12 months |
| Wrangler Unlimited 3.6 4×4 (2013 – 2015) | Pentastar | 5.6 | Use: Flexible (max) 12 000 km/ 12 months Use: Severe 7 500 km/ 12 months |
| Wrangler Unlimited 3.6 4×4 (2015 – 2018) | Pentastar | 5.6 | Use: Flexible (max) 12 000 km/ 12 months Use: Severe 7 500 km/ 12 months |
| Wrangler 3.8 (USA) (2007 – 2007) | SMPI | 5.7 | 10 000 km/ 6 months |
| Wrangler 3.8 (CAN) (2007 – 2007) | SMPI | 5.7 | 5 000 km/ 3 months |
| Wrangler 3.8 (2008 – 2011) | SMPI | 5.7 | 10 000 km/ 6 months |
| Wrangler Unlimited 3.8 (USA) (2007 – 2007) | SMPI | 5.7 | 10 000 km/ 6 months |
| Wrangler Unlimited 3.8 (CAN) (2007 – 2007) | SMPI | 5.7 | 5 000 km/ 3 months |
| Wrangler Unlimited 3.8 (2008 – 2011) | SMPI | 5.7 | 10 000 km/ 6 months |
Best Oil for Jeep Wrangler
The most suitable engine oil to use on your Jeep Wrangler is oil that is clean. No matter what type of oil whether it’s regular or full synthetic. What isn’t changing or should not alter is the intervals for replacement.
This doesn’t mean that if you’re using an expensive premium oil brand it isn’t possible to prolong the time between oil changes.
You can certainly argue that synthetic oil will last longer than regular oil, but synthetic oil is affected at the same rate that regular oils do.
That being said the intervals for oil changes should be identical for both conventional and synthetic motor oils due to the above-mentioned reasons.
Jeep owners would recommend one of the following brands:
- Mobile 1 High Mileage Full Synthetic (10W-30)
- Royal Purple 5w-20
- Valvoline 5W-30
Mopar suggests using six five quarts of oil 5W-20. Based on the driving conditions (extreme cold or extreme heat) you may also apply 5W-30.
People Also Searches 2007 jeep wrangler oil type and capacity
| See all 17 rows on oil-change.info |
| See all 31 rows on oil-change.info |
| 2007 jeep wrangler fluid capacities |
| 2007 jeep wrangler oil specs |
| 2007 jeep wrangler oil type |
| 2012 jeep wrangler oil capacity |
| 2013 jeep wrangler oil capacity |
| 2008 jeep wrangler oil capacity |
| 2011 jeep wrangler oil capacity |
| jeep wrangler recommended oil |
Conclusion
The right type of oil to use on your 2007 Jeep Wrangler is essential for the best performance and engine protection.
Knowing the viscosity of oil and the various types of oil that are available can assist you in take a shrewd choice.
Your Jeep will operate efficiently for many years to come if you adhere to the manufacturer’s recommendations for oil viscosity, type, and maintenance.
For more posts visit our website: https://engineoiil-capacity.com/
FAQs – 2007 Jeep Wrangler oil type and capacity
What kind of oil does a 2007 Jeep Wrangler take?
The Jeep Wrangler 2007 features an oil capacity of 6 quarts, and once again fully synthetic 5W-20 engine oil is recommended for use. The best options include Pennzoil and Castrol. This particular model also features a fuel tank capacity of 18.6 gallons.
How much does it cost to oil a Jeep Wrangler?
Generally speaking, you can spend anywhere from $20 to $100 on engine oil for your Jeep Wrangler. Here is a short list of the best synthetic engine oil for Jeep Wrangler according to price (low to high). How much oil does a Jeep Wrangler take?
How many quarts of oil does a 2016 Jeep Wrangler take?
The 2016 Jeep Wrangler has an oil capacity of 6 quarts, and just like the 2017 model, requires SAE 5W-20 Engine oil. Fully synthetic oil is recommended for use, although a synthetic blend will do as well. As it appears, the most recent models of the Jeep Wrangler are very similar.
What’s the 2008 Jeep Wrangler engine size?
The 2008 Jeep Wrangler features a 3.8 liter, 6-cylinder engine with 202 HP at 5,200 RPM. It features a fuel capacity of 18.6 gallons and can get roughly 18 miles per gallon.
What kind of oil should I apply in the 2007 Jeep Wrangler?
The type of oil recommended for the 2007 Jeep Wrangler depends on the engine model. In the case of the 2.4L 4-cylinder engine, Chrysler advises 5W-20 and 5W-30 as motor oil that is certified to meet an API certification mark and complies with Chrysler Material Standard MS-6395. In the case of a 3.8L V6 engine, Chrysler suggests using either 5W-20 or oil that is in compliance with the API certification mark and is compliant with Chrysler Material Standard MS-6395.
What is the capacity of oil of the 2007 Jeep Wrangler?
The capacity of the oil for the 2007 Jeep Wrangler with the 2.4L engine with four cylinders is about 4.0 Quarts (3.8 liters) after a filter change. The capacity of oil for the 2007 Jeep Wrangler with the 3.8L V6 engine is roughly 6.0 cubic inches (5.7 liters) when a filter is changed.