2016 Chevy Malibu LT Oil Type, Capacity, Filter & Change Cost

2016 Chevy Malibu LT Oil Type: Its 2016 Chevy Malibu LT is equipped with A 1.5L turbocharged four-cylinder engine that requires five quarts (5W-30) synthetic motor oil As well As A brand new filter for the oil each time you change your oil.

Here’s what you should be aware of the type of oil capacity, filter size, And the cost of changing it for the 2016 Chevy Malibu It’s an LT model:

• Type of oil: 5W-30 motor oil synthetic
• Capacity: 5 quarts
• Filter for oil: The oil filter must be replaced is required for every oil change
• Cost of change: The cost of changing the oil in your 2016 Chevy Malibu LT is different according to the location you are in and the kind of oil that you choose to use.

If you follow these easy tips, you can keep your 2016 Chevy Malibu’s engine running efficiently And help prevent wear and tear that is premature.

2016 Chevy Malibu LT Oil Type

The oil type recommended for 2016. Chevy Malibu LTL can be SAE 5W-30, A synthetic blend of oil. The owner’s handbook for the automobile has the same information.

It’s essential to make sure you use the correct oil type to guarantee proper engine performance as well as to protect your warranty on your vehicle.

2016 Chevy Malibu LT Oil Capacity

The capacity of oil for the 2015 Chevy Malibu LT is equipped with a 1.5L engine. 1.5L engine is about 4.0 4 quarts (3.8 Liters) from SAE 5W-30 Synthetic Blend oil when the oil filter is changed. However, the exact capacity will vary based on the particular engine As well As other variables.

It is always recommended to check the owner’s manual or call An authorized Chevy mechanic or dealer to verify the exact capacity of your oil for your car.

2016 Chevy Malibu LT Oil Filter

A recommended filter to use for 2016. Chevy Malibu LT differs based on the particular engine. But, here Are A few of the most popular filter types for the particular model:

• ACDelco PF2257G Professional Engine Oil Filter
• Fram XG10575 Ultra Synthetic Spin-On Oil Filter
• Mobil 1 M1-113 Extended Performance Oil Filter

It is essential to choose an oil filter of high quality designed to work with the specific engine to guarantee optimal performance and durability.

You can consult the owner’s manual or talk to An authorized Chevy mechanic or dealer to determine the appropriate oil filter for your car.

To conduct the oil replacement on A model 2016 Chevy Malibu LT you’ll require the following equipment:

• Engine oil: The recommended engine oil to use on the Chevrolet Malibu LT for the year 2016 is 5W-30. Chevy Malibu LTL is 5W-30 fully synthetic oil. Other choices include 0W-20 and 5W-20. Its capacity can be 5 quarts.
• Oil filter: You’ll have to replace your oil filter At the time of the oil change. There are many options for replacing the oil filter like OE Replacement or Go-Parts.

Here are a few places where you can buy the oil and filter:

• AutoZone: AutoZone offers 5W-30 synthetic engine oil that is fully synthetic to the new Chevy Malibu LTL.
• Advanced Auto Parts: come with Castrol EDG 0W-20 EDGE advanced fully synthetic motor oil.
• AMSOIL: AMSOIL provides 5W-20 and 0W-20 engine oils. 
• Walmart: Walmart offers both oil filters and engine oil to the new Chevy Malibu LT.

It is essential to adhere to the specifications And recommendations of the manufacturer when choosing the correct oil and filter that you want for your car. 

You should refer to the owner’s manual of your vehicle or seek out A professional mechanic for specific directions on how to conduct changing the oil.

How to Change Your 2016 Chevy Malibu LT Oil

Change the oil in the 2016 Chevy Malibu The LT is a straightforward procedure you can perform yourself or have an expert. This step-by-step guide will show you how to change the oil inside your vehicle.

1. Start warming up your engine with a drive for a couple of minutes.
2. Switch off your engine and raise off the back of your vehicle by using a car jack.
3. Install a container beneath the drain plug for oil to capture Any old oils.
4. Unscrew the drain plug on the oil then let the oil completely drain away.
5. Replace the drain plug for oil And secure it with a screw.
6. Clean the oil filter by using A wrench for oil filters.
7. The new filter must be filled with synthetic oil before screwing it back into position.
8. Inject the natural oil by using the funnel.
9. Verify the level of oil by using the dipstick. Add additional oil if needed.
10. Start the engine And let it run for A couple of minutes.
11. Switch off the engine And test the oil level once more.
12. Remove the old oil correctly.

People Also Searches 2016 Chevy Malibu lt oil type

Conclusion

Maintaining the 2016 Chevy Malibu LT vehicle is vital for you to ensure that it will last for a long time.

Regularly changing the oil with the recommended synthetic oil 5W-30 will improve the performance of your engine extend the life of your engine and reduce maintenance expenses.

Be sure to get rid of old oil in A proper manner and, if you’re not confident about changing the oil on your own take your vehicle to A professional for an oil change.

If you follow these guidelines follow these steps, you will ensure the 2016 Chevy Malibu LT remains in top condition And runs effortlessly for A long time in the future.

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – 2016 Chevy Malibu lt oil type

What’s the 2016 Chevy Malibu Oil capacity?

The 2016 Chevrolet Malibu’s oil capacity is dependent on the engine type. The Ecotec 1.5L DOHC I-4 can hold 4 quarts, the Ecotec 2.0L DOHC I-4 holds 5 quarts and the oil capacity for the Ecotec 1.8L Hybrid is 5.3. The suggested oil type is SAE 5W-30 full synthetic engine oil.

What kind of engine does the 2016 Chevy Malibu have?

The 2016 Chevrolet Malibu comes with one of three different engine configurations — You’ll either have a 1.5-liter 4Cylinder turbocharged engine, a 1.8L 4Cylinder naturally aspirated gasoline engine or a 2.0-liter 4Cylinder turbocharged engine.

What kind of oil does a 2016 Chevy Silverado use?

2016, and 2017, 1.5 engines use Dexos1 Gen2 – 5W-30 oil with a specified UPF64R filter. 2018 up 1.5 engines use Dexos1 Gen2 – 0W-20 oil and the filter was changed to a PF64.

What kind of oil do you use in your 2016-2019 engines?

Nothing consumer-facing ever trickled down nor do any bulletins indicate any change. 2016-2017 1.5T remains 5W30 and UPF64R. 2016, and 2017, 1.5 engines use Dexos1 Gen2 – 5W-30 oil with a specified UPF64R filter. 2018 up 1.5 engines use Dexos1 Gen2 – 0W-20 oil and the filter was changed to a PF64.

What kind of oil do I choose in my new 2016 Chevy MalibuLT?

In accordance with the owner’s manual, the recommended oil is dexos1(r) 5W-30, a synthetic blend of oil that is suitable for the 2015 Chevy Malibu L.

Can I make use of conventional oil instead of the synthetic blend?

It is suggested to utilize synthetic blend oil however you can utilize conventional oil if synthetic blend oil isn’t readily available.

How often do I need to check the oil level in my 2015 Chevy Malibu LT?

The manual for the owner recommends changing the oil at least every 7,500 miles or once every 12 months, or whichever comes first.