Type Of Oil For Dodge Charger Scatpack: It’s a fact that your Dodge Charger Scatpack is a super-fast muscle car, which is why it’s essential to use the correct filter and oil to ensure it’s running efficiently.
In this article, I’ll discuss the type of oil recommended capacity, size, and filter for your Scatpack as well as the typical cost of changing your oil.
Oil type: Dodge recommends using full synthetic 0W-40 oil for the Charger Scatpack. This kind of oil is made to shield your engine from extreme conditions like extreme heat or high speeds.
The capacity of oil: The Charger Scatpack has a 6.4L V8 engine. It is able to hold an oil capacity of 7 quarts, with a filter.
Oil filter: Dodge suggests using the Mopar 5038299AA filter for the Charger Scatpack. The filter was designed in order to snare dirt and other debris that can be found in your engine oil, which helps maintain your car safe and clean.
Price of Oil Change: The average cost of an oil change for a Dodge Charger Scatpack ranges from $94 to $113. This includes the price of oil filters, labor, and.
Dodge Chargers By Engine type
Typically the seventh-generation Dodge Chargers will have 4 engines. Technically speaking, it is only two of them, the 6.2L V8, as well as 6.4L V8 engines, will require synthetic oil. However, a lot of Dodge Charger users are content with the performance of 5W20 oil and have not considered changing their minds.
- 3.6L V6 (SXT/GT) – SAE 5W 20 – holding 5.9 quarts
- 5.7L V8 (RT) – SAE 5W – 20 holding 7 quarts
- 6.2L V8 (SRT Hellcat Widebody/ Hellcat Redeye Widebody) – SAW 40 – 0W, holding 7 quarts
- 6.4L V8 (Scat Pack/ Scat Pack Widebody) – SAW 0W 40, holds 7 quarts
Dodge Charger Scatpack Oil Capacity
It is worth noting that the 2023 Dodge Charger Scatpack has seven quarts and a filter. Be sure to remember that this is merely an average guideline. The exact amount of oil required will depend on the vehicle’s engine and driving conditions.
It is recommended to refer to the owner’s manual of your vehicle for the exact amount of oil that is required for your vehicle.
It is also important to choose the right kind that is suitable for the Dodge Charger Scatpack. The manufacturer suggests using synthetic oil with 0W-40. This kind of oil provides the most protection to your engine under any driving condition.
Dodge Charger Scatpack Oil Filter
The recommended oil filter for the Dodge Charger Scatpack is the Mopar Oil Filter model number 4884899AC.
This is a top-quality filter specifically designed to offer the highest filtering of the 6.4L Hemi engine.
It has a 10-micron filtering rating that is extremely large and will help keep the engine in good condition and safe.
Here are a few more oil filters suitable for the Dodge Charger Scatpack:
- Wix XP21021
- Royal Purple RA1024
- Fram Ultra Synthetic OC2814
- Motorcraft FL-500S
- Purolator PureGuard PL14674
When selecting one of the oil filters for the Dodge Charger Scatpack, it is essential to select the best quality filter that provides the most effective quality of filtration.
This Mopar oil filter is an excellent alternative, but there are many other excellent alternatives available.
Dodge Charger Scatpack Oil Change
- Gather the essential tools including an oil filter wrench drain pan, a new oil filter, and a proper amount of premium engine oil.
- Lift your vehicle up securely and find the drain plug for oil beneath the engine.
- Place the drain pan under the plug, take off the plug, and then allow that old oil to completely drain.
- Install a new drain connector, and then employ the filter wrench to get rid of the old oil filter.
- Make sure the gasket is properly lubricated on the new filter, then fix it with a secure clamp.
- The recommended amount of new oil into the cap on the oil filler.
- The engine should be started briefly. check for leaks.
Conclusion:
Thank you for taking the time to read this article about the type of oil for the Dodge Charger Scatpack! I hope you find it informative and useful.
It is essential to choose the right type of oil for your vehicle in order to ensure it runs smoothly and avoid engine damage.
When it comes to the Dodge Charger Scatpack, the manufacturer suggests using synthetic oil 0W-40. This kind of oil offers the most protection to your engine under any driving condition.
I recommend that you change your oil on a regular basis in accordance with the recommendations of the manufacturer. This will help keep your engine in good shape and operating at its peak.
Thank you for taking the time to read! I’m always willing to help with any questions you might have regarding your car. I wish you an amazing day!
For more posts visit our website: https://engineoiil-capacity.com/
FAQs – type of oil for dodge charger scat pack
What’s the 2019 Dodge Charger oil type?
The 2019 Dodge Charger uses a full synthetic oil sae 5w-20 and has an A7-quart capacity. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself.
What kind of oil does a Dodge Hellcat use?
Dodge uses full synthetic 0/40 for the Hellcat and scat pack Hemi you can run regularly for the V6 engines Synthetic gives you more miles between oil changes. I still change my Hellcat every 3k miles
Does Dodge use a special oil filter for SRT engines?
My small little town doesn’t have a Dodge dealer, so I will have to buy the recommended oil and take it to my oil change guy. Does Dodge use a special filter for the SRT engines? I would use Pennzoil 0W40 Ultra Platinum. You can get it through Amazon for a good price No special oil filter per se.
Is Pennzoil the only oil that meets Dodge’s specs?
Really confused It looks like the only oil that meets Dodge standards is made by Pennzoil 0-40. I have been using Mobil 1 for years and after contacting them I was informed that they Don’t make oil that is up to Dodge specs ?!!! So is Pennzoil the oil-approved oil? You can use any 0w-40 that meets the MS-12633 spec.