2018 Jeep Wrangler Oil Type, Capacity, Change Interval & Oil Change Cost Guide

The 2016 Ford F-150 5.0L V8 remains one of the most reliable full-size pickup trucks ever built. Powered by Ford’s durable 5.0L Ti-VCT V8 engine, this truck delivers excellent towing capability, strong performance, and long-term dependability. However, maintaining that reliability starts with using the correct engine oil and following proper maintenance intervals.

Whether you use your F-150 for daily commuting, towing heavy trailers, hauling equipment, or long highway trips, choosing the proper oil viscosity and changing the oil regularly helps prevent premature engine wear, sludge buildup, overheating, and costly repairs.

5.0L Ti-VCT V8 Engine
SAE 5W-20 Recommended
8.8 Quarts Capacity
Full Synthetic Preferred
Built For Towing

2016 Ford F-150 5.0 Oil Type

The recommended oil type for the 2016 Ford F-150 5.0L V8 is SAE 5W-20 full synthetic motor oil meeting Ford specification WSS-M2C945-A or newer equivalent standards.

Ford engineered the Coyote 5.0L V8 to operate efficiently with 5W-20 oil, which provides excellent lubrication during cold starts while maintaining protection under high operating temperatures.

Best Overall Choice: Full synthetic SAE 5W-20 provides maximum protection against wear, oxidation, sludge formation, and extreme towing conditions.

2016 Ford F-150 5.0 Oil Capacity

The 2016 Ford F-150 5.0 oil capacity is approximately 8.8 quarts (8.3 liters) when replacing both the engine oil and oil filter.

Vehicle
Engine
Oil Type
Oil Capacity
Oil Filter
2016 Ford F-150
5.0L V8
SAE 5W-20
8.8 Quarts (8.3L)
Motorcraft FL-500S

Important: Always verify the oil level using the dipstick after refilling. Never rely solely on the listed capacity because slight variations can occur during draining.

Best Oil for 2016 Ford F-150 5.0

Choosing premium synthetic oil can significantly improve engine longevity and reduce wear inside the Coyote V8 engine.

Top Recommended Oils

  • Mobil 1 Advanced Fuel Economy 5W-20
  • Valvoline Advanced Full Synthetic 5W-20
  • Pennzoil Ultra Platinum 5W-20
  • Castrol EDGE 5W-20
  • Motorcraft Synthetic Blend 5W-20
  • Royal Purple High Performance 5W-20

Benefits of Synthetic Oil

  • Improved wear protection
  • Better cold-weather performance
  • Enhanced fuel economy
  • Reduced sludge buildup
  • Extended oil life
  • Superior towing protection

2016 Ford F-150 5.0 Oil Change Interval

Ford equips the F-150 with an Intelligent Oil Life Monitor that tracks operating conditions and determines when service is required. However, many technicians recommend shorter intervals for maximum engine protection.

Driving Condition
Recommended Interval
Normal Driving
7,500–10,000 Miles
Frequent Towing
5,000 Miles
Extreme Heat
5,000 Miles
Short Trips
5,000–7,500 Miles

2016 Ford F-150 5.0 Oil Change Cost

One of the most searched questions among owners is the average cost of an oil change. Pricing varies depending on whether you perform the service yourself or visit a dealership.

Service Type
Estimated Cost
DIY Oil Change
$55–$85
Independent Repair Shop
$75–$120
Ford Dealership
$100–$160

How to Change Oil on a 2016 Ford F-150 5.0

Step 1: Warm the engine for several minutes.
Step 2: Safely raise the truck if needed.
Step 3: Remove the drain plug and drain old oil.
Step 4: Replace the Motorcraft FL-500S oil filter.
Step 5: Reinstall drain plug and refill with fresh 5W-20 oil.
Step 6: Verify oil level and inspect for leaks.

Common 5.0 Coyote Engine Oil-Related Problems

Oil Consumption

Some high-mileage engines may consume oil between changes. Routine oil level checks are recommended.

Timing Chain Noise

Low oil levels or delayed oil changes can contribute to timing chain and phaser noise.

Oil Leaks

Valve cover gaskets and oil pan seals may develop leaks over time.

Sludge Formation

Neglecting oil changes can cause sludge buildup that restricts oil flow.

Signs Your F-150 Needs an Oil Change

  • Oil life monitor warning
  • Dark or dirty engine oil
  • Reduced fuel economy
  • Engine ticking noises
  • Burning oil smell
  • Engine running rough
  • Low oil level
  • Check engine light

Maintenance Tips for Maximum Engine Life

  • Check oil monthly
  • Use OEM-quality filters
  • Follow oil life monitor recommendations
  • Use premium synthetic oil
  • Avoid extending oil changes excessively
  • Inspect underneath for leaks
  • Replace air filter regularly
  • Use quality fuel

Frequently Asked Questions

How much oil does a 2016 F-150 5.0 take?

The 2016 Ford F-150 5.0L V8 requires approximately 8.8 quarts of oil when changing both the oil and filter.

What oil does a 2016 Ford F-150 5.0 use?

Ford recommends SAE 5W-20 engine oil that meets Ford specifications.

Can I use 5W-30 instead of 5W-20?

While some owners use 5W-30 in hotter climates, Ford recommends 5W-20 for optimal performance and fuel economy.

What oil filter does a 2016 F-150 5.0 use?

The recommended oil filter is the Motorcraft FL-500S.

How often should I change the oil?

Most owners should change the oil every 7,500 miles, or sooner if towing or driving under severe conditions.

Final Thoughts

The 2016 Ford F-150 equipped with the legendary 5.0L Coyote V8 can easily exceed 200,000 miles when maintained properly. Using the correct SAE 5W-20 oil, replacing the filter during every oil change, and following appropriate service intervals will help ensure reliable performance for years to come.

Quick Summary

  • Engine: 5.0L Ti-VCT V8
  • Oil Type: SAE 5W-20
  • Oil Capacity: 8.8 Quarts
  • Oil Filter: Motorcraft FL-500S
  • Oil Change Interval: 7,500–10,000 Miles
  • Average Oil Change Cost: $55–$160