2018 GMC Sierra 1500 Oil Type, Capacity, Filter & Change Cost

2018 GMC Sierra 1500 Oil Type, Capacity, Filter & Change Cost

2018 GMC Sierra 1500 Oil Type: The 2017 GMC Sierra 1500 needs the top oil to ensure it runs efficiently and smoothly. Here’s what you should be aware of the type of oil capacity, capacity, filter, and the cost of changing your vehicle.

The type of oil for the 2017 GMC Sierra 1500 is 5W-30 full synthetic oil. The capacity of the oil of 8 cubic quarts.

It is an oil filter spin-on canister model with an M22 x 1.5 diameter thread. The cost of an oil change ranges from $140 to $151.

If you follow these tips You can ensure that your new 2018 GMC Sierra 1500 runs smoothly for a long time to come.

2018 gmc sierra 1500 oil change type

2018 GMC Sierra 1500 oil Type

The recommended oil type for a 2018 GMC Sierra 1500 with a 5.3L or 6.2L V8 engine is SAE 0W-20 full synthetic oil.

This oil is designed to flow easily at low temperatures, which is important for cold-weather starts. It also provides good protection for the engine at high temperatures.

2018 GMC Sierra 1500 oil capacity

Engine typeOil capacity with filterOil typeOil Change Intervals
2018 Sierra 1500 6.2L L868 qt (7.6 l)0W-207,500 – 10,000 miles
2018 Sierra 1500 5.3L L8B8 qt (7.6 l)0W-207,500 – 10,000 miles
2018 Sierra 1500 5.3L L838 qt (7.6 l)0W-207,500 – 10,000 miles
2018 Sierra 1500 5.3L L83 Flex8 qt (7.6 l)0W-207,500 – 10,000 miles
2018 Sierra 1500 4.3L LV3 Flex6 qt (5.7 l)5W-30, 0W-307,500 – 10,000 miles

2018 gmc Sierra 1500 oil filter

The oil filter of the 2017 GMC Sierra 1500 also depends on the type of engine.

In the case of a 4.3L V6 engine, the recommended oil filter’s part number is PF63E.

For the 5.3L V8 engine, the recommended part number for the oil filter is PF63F.

If you’re running the 6.2L V8 engine, the recommended part number for the oil filter is PF63G.

It is crucial to check the owner’s guide to get specific information on the recommended oil filter for your car and the maintenance plan.

2018 gmc Sierra 1500 oil change

Below are some steps for changing the oil in a 2017 GMC Sierra 1500:

  1. Your vehicle should be parked on an even surface.
  2. Shut off your engine, and allow it to cool down.
  3. Lift the hood, and then locate the cap for filling up with oil.
  4. Take off the cap for the oil filler and put it away.
  5. Put a drain pan on top of the drain plug for oil.
  6. Use a wrench to loosen the plug for draining oil.
  7. Let the old oil run out of the pan.
  8. After the old oil is gone it is time to replace the drain fitting and secure it using a wrench.
  9. Clean your old filter.
  10. Apply a thin layer of oil that is new to that gasket on the new filter.
  11. Attach the new filter with your hands until it’s secure.
  12. Inject new oil into the engine.
  13. Replace the cap that holds the oil.
  14. Get the motor started and let it run for a couple of minutes.
  15. Verify the level of oil and add oil, if needed.
  16. Switch off the engine, then you’re finished!

People Also Searches 2018 GMC Sierra 1500 oil type

recommended oil for GMC Sierra
2021 GMC Sierra oil type
oil for 2021 GMC Sierra
GMC recommended oil
GMC Sierra 5.3l oil capacity
2015 GMC Sierra oil type
2014 GMC Sierra oil type
recommended oil for GMC Sierra
2021 GMC Sierra oil type
oil for 2021 GMC Sierra
GMC recommended oil
GMC Sierra 5.3l oil capacity
2015 GMC Sierra oil type
2014 GMC Sierra oil type

Conclusion

Selecting the correct type of oil for the 2017 GMC Sierra 1500 is crucial for keeping your vehicle running efficiently and smoothly. In this article, we have discussed the different oil types available for this truck and their benefits.

Be sure to read the owner’s manual as well as adhere to the manufacturer’s suggestions regarding the type of oil viscosity, type, and intervals for changing.

For more information visit their official website at

FAQs – 2018 GMC Sierra 1500 oil type

What kind of oil does a 2018 GMC Sierra 1500 take?

2018 GMC Sierra 1500: oil type and capacity? 2018 GMC Sierra 1500 5.3L and 6.2L V8 engines utilise SAE 0W-20 oil. SAE 5W-30 is needed for 4.3L and 6L V6 engines.

How many quarts of oil does a 2015 GMC Sierra 1500 take?

The 2.7l 4 engine runs on 0W-30 oil and has a 6-quart capacity. The 4.6l v6 engine runs on 5w-30 oil and has a six-quart capacity. Both the 5.3l and 6.2l v8 engines use 0W-20 and have an 8-quart capacity. Oil Type for 2015 GMC Sierra 1500

How often to change the oil in a GMC Sierra?

How often to change the oil in GMC Sierra? Full synthetic oil can last longer than other oils. It depends upon the type of vehicle and the brand of synthetic oil you are using in it. You should check the user manual to get information about oil change intervals. Typically some models need to change oil every 3000 to 5000 miles.

What does the oil light mean on a GMC Sierra?

All GMC Sierra trucks have an engine oil system to monitor engine speed temperature and operating conditions. This system has lights to indicate when it is time to change the oil. Whenever the oil level is down white light turns on immediately. OLS system does not indicate an oil change warning before six months and a year.