2018 Ford Explorer Oil Type: The new Ford Explorer is a popular SUV that is known for its reliability and performance. For keeping your Explorer operating smoothly it is essential to have regular oil adjustments.
In this article, I’ll address all your questions regarding the 2018 Ford Explorer oil type, capacity filter, and the cost of changing your oil.
I’ll also offer some suggestions on how to select the best engine oil to fit your Explorer and change your oil on your own.
oil type: 5W-20 synthetic oil is suggested for the Ford Explorer model of 2018. Ford Explorer.
Capacity for Oil: The oil capacity for the 2018 Ford Explorer varies depending on the type of engine:
- 2.3L EcoBoost: 5.7 quarts
- 3.5L EcoBoost and 3.5L Duratec 6 quarts
Oil Filter: The recommended filter to be used in the 2018 Ford Explorer is the Motorcraft FL-500S.
Oil change cost: The cost for an oil change on a Ford Explorer in the year 2018 is between $82 and $99. Ford Explorer is between $82 to $99.
This price can vary based on the kind of oil used as well as the rate of labor employed by the shop, and other services offered.
2018 Ford Explorer Oil Type
The recommended type of oil for the 2017 Ford Explorer is 5W-20 synthetic oil. This type of oil offers the most safety for your vehicle under any driving condition.
If you live in a frigid environment, you may be interested in making use of a 0W-20 synthetic oil. If you reside in a hot climate it is possible to think about using a synthetic 10W-30 oil.
It’s also important to remember that when you drive in extreme conditions, like the traffic that is smoky or stop-and-go it is possible be change your oil more frequently than the recommended at 5,000 miles or every six months.
2018 Ford Explorer oil capacity
The capacity of oil for a Ford Explorer in the year 2018 Ford Explorer varies depending on the size of the engine.
- 2.3L 4-cylinder: 5.7 quarts (5.4 liters).
- 3.5L V6: 6 quarts (5.7 liters).
- 3.5L V6 EcoBoost engine: 6 quarts (5.7 liters)
Read the owner’s guide or consult an authorized mechanic for precise information about the oil capacity.
2018 Ford Explorer oil change interval
As per the Ford owner’s manual according to the manual, the recommended interval for changing the oil on the 2017 Ford Explorer will be 7,500-10,000 miles or 6-12 months, depending on when it occurs.
The interval is based on standard driving conditions. If you travel in harsh conditions, for example in areas with a lot of dust or sand, or if you tow often, you might have to change your oil more frequently.
2018 Ford Explorer oil filter
The oil filter of the new Ford Explorer varies depending on the type of engine.
- To use this 2.3L 4-cylinder engine the recommended oil filter is Motorcraft FL-910S.
- To use this 3.5L V6 engine the recommended oil filter is Motorcraft FL-500S.
- In the case of this 3.5L V6 EcoBoost engine, the suggested oil filter to use is the Motorcraft FL-2062.
Always refer to the owner’s guide and consult with a qualified mechanic for precise information about the correct oil filter for your specific vehicle.
2018 Ford Explorer oil change
Here is an instruction on how to change the oil in the Ford Explorer model year 2018. Ford Explorer:
Materials Needed:
- 5W-20 Synthetic Motor Oil
- Oil filter (Motorcraft FL500S)
- Oil drain pan
- Funnel
- Socket wrench or the ratchet
- Torque wrench
- Gloves
- Safety glasses
Steps:
- Get the engine warmed up by running for a few minutes. This will aid in the flow of oil more smoothly.
- Shut off the engine and allow it to let it cool off for a couple of minutes. This will aid in preventing burns.
- Place the drain pan for oil underneath the drain plug for oil that is situated at the bottom of the engine.
- Use a socket wrench, or a ratchet to loosen the drain plug.
- When the plug for draining oil is removed, take it off by hand. Be sure that you do not spill oil.
- Let the oil be completely drained into the drain pan.
- After the oil has been run out replace the draining plug. Tighten it up to 25 Ft-lbs of torque.
- Take off an old oil filter by hand.
- Apply a thin layer of new oil on the gasket of the new oil filter.
- Install on the oil filter mount the latest version of the mount for the oil filter.
- Make sure the engine is filled with six-quarters of synthetic 5W-20 motor oil.
- Replace the cap for oil.
- Begin the engine, and let it run for a couple of minutes.
- Examine for leaks around the oil drain plug as well as the oil filter.
- Shut off the motor and allow it to sit for a couple of minutes.
- Make use of a dipstick for checking the level of oil. If the level is low, you can add liquid until it is at its maximum.
People Also Searches 2018 Ford Explorer oil type
| 2017 ford explorer recommended oil |
| the best oil for ford explorer |
| 2014 ford explorer recommended oil |
| 2017 ford explorer oil type |
| motor oil for ford explorer |
| ford explorer engine oil |
| 2014 ford explorer oil specs |
| Ford Explorer (Sport Utility Vehicle)The Ford Explorer is a range of SUVs manufactured by the Ford Motor Company since the 1991 model year. Th… |
Conclusion
For the Ford Explorer model year 2018, choosing the right oil is essential to maintaining your car’s performance and longevity.
Consult the owner’s manual, learn about available oils, and select the one that best suits your needs for an informed choice. When deciding on the oil type, consider factors such as viscosity ratings, driving conditions, and your budget.
For more posts visit our website: https://engineoiil-capacity.com/
FAQs – 2018 Ford Explorer oil type
What kind of oil does a 2018 Ford Explorer take?
Motor oil SAE 5W-30 must be poured into the engine of a 2018 Ford Explorer. It is essential to use the correct viscosity (or thickness) of engine oil for your vehicle. Using the incorrect oil viscosity can create engine difficulties. For the correct oil type for your specific car, consult the owner’s manual or contact a Ford dealership.
What kind of oil does Ford use in their cars?
Depending on your vehicle, Ford may recommend one type or allow a second type for your oil changes to work as they should. At Five Star Ford Lincoln, we use only high-quality Valvoline engine oil for our services. Why does synthetic oil cost more than conventional oil?
How much is the oil for a 1997 Ford Explorer?
How to choose motor oil for a 1997 Ford Explorer 4.0L. Consider Pro High Performance™ SAE 5W-20 Synthetic Blend. The average cost of a Ford Explorer oil change is between $172 and $202. Labor costs range from $39 to $50, with parts priced between $133 and $152.
How much is an oil change for a Ford Explorer?
The average Ford Explorer oil change includes labor costs estimated between $39 and $50, with parts ranging from $133 to $152. Hey, I’m David. I’ve worked in a car store for 6 years.