2015 Chevy 2500 6.0 Oil Type, Capacity, Filter & Change Cost

2015 Chevy 2500 6.0 Oil Type, Capacity, Filter & Change Cost

2015 Chevy 2500 6.0 Oil Type: The 2015 Chevy 2500 engine with the 6.0L is a powerful, reliable workhorse. But it requires the right oil in order to run at its best. This blog post will cover all you need to about the 2015 Chevy 2500 6 oil type, capacity, and filter.

Oil Type: SAE 5W-30 Synthetic oil is the recommended oil for a 2015 Chevy2500 6.0L Engine. For high-performance engines, experts recommend synthetic oil due to its superior wear protection, even under extreme conditions.

Capacity of Oil: Oil capacity for the 2015 Chevy 2500 with a 6.0L is 6 quarts. Check your oil regularly and add more as necessary. Overfilling your engine’s oil can lead to serious damage.

Oil Filter: We recommend the ACDelco 638G or the Wix 57081 oil filters for a 2015 Chevy 1500 6.0L engine. You should change your filter each time you change the oil. This will keep your engine free from contaminants and clean.

Oil Change Price: The cost of an oil change for a 2015 Chevy 6.0L engine varies depending on the location where you have it done. You can expect to spend between $50 and $70 on a professional oil change.

2015 Chevy 2500 6.0 Oil Type

The oil type recommended for 2015. The Chevy 2500 6.0L engine is a full synthetic 5W-30. This oil type effectively protects your engine in varying conditions, including cold and hot weather, as well as heavy towing and hauling.

Some of the most popular brands of 5W-30 full synthetic oil are:

  • Mobil 1
  • Castrol Edge
  • Pennzoil Platinum
  • Royal Purple
  • AMSOIL

When selecting an oil, make sure it aligns with Chevrolet’s recommended specifications. The oil specifications recommended for your car are dexos1 Gen 2. This information is available on the bottle of oil or in the owner’s manual.

2015 Chevy 2500 6.0 Oil Capacity 

The capacity of oil for 2015. The Chevy 2500 6.0L engine is 8 quarts. The oil filter is included. It is crucial to refer to the owner’s manual for the particular capacity of the oil in your car, as it will differ based on the year of manufacture and the trim level.

In order to change your engine oil it’s ideal to use a synthetic 5W-30 oil which meets the dexos1 Gen2 specification. This will give you the greatest possible protection for your engine during different conditions.

2015 Chevy 2500 6.0 Oil Filter 

The oil filter that is used for the year 2015 Chevy 2500 6.0L engine is the ACDelco PF2232G. It is an oil filter that is full-flow and eliminates debris, dirt, as well as other contaminants, from engine oil.

Here are some additional compatible oil filters for 2015. Chevy 2500 6.0L engine:

  • Fram PH10060
  • Mobil 1 M1-113A
  • K&N HP-1017
  • Wix 57060
  • Purolator PL10241

It is crucial to select the correct oil filter for the car’s make, model, and year engine. This information can be found in your owner’s guide or on the internet.

2015 Chevy 2500 6.0 Oil Change 

For changing the oil on your 2015. Chevy 2500 6.0L engine, you’ll require the following items:

  • 8 quarters of 5W-30 full synthetic oil that meets dexos1 Gen2 specification.
  • A brand new oil filter (ACDelco PF2232G or equivalent)
  • An oil drain pan
  • A funnel
  • A wrench or an oil filter wrench
  • Rags

Instructions:

  1. Start your engine and warm it up for several minutes.
  2. Place your car in an area that is level.
  3. Turn off the engine, then lift the hood.
  4. Find the oil drain plug and then remove it.
  5. Let the old oil be drained out of the pan.
  6. Replace the plug that drains oil and make sure it is tightened.
  7. Find the oil filter and take it off.
  8. Apply a thin layer of fresh oil on the seal of your oil filter that has been replaced.
  9. Attach the new filter with your hands until it’s secure.
  10. Inject new oil into the engine.
  11. Verify the level of oil and add oil, if necessary.
  12. Get the motor started and allow it to run for a couple of minutes.
  13. Make sure the oil level is checked and make sure to add more oil if needed.
  14. Switch off the engine and shut the hood.

FAQs – 2015 Chevy 2500 6.0 oil type

What kind of oil does a 2015 Chevy Silverado 2500 HD use?

AMSOIL synthetic lubricants are the solution for drivers who want the most from their 2015 Chevrolet Trucks SILVERADO 2500 HD PICKUP. How good are they?

How many quarts of oil does a Chevy 2500 take?

The type of oil used in a Chevy 2500 HD 6.0 is Chevron Delo synthetic motor oil 5w-40 2.5 Gallon. Um Kelly you might want to go back to school. There are 4 quarts to a gallon. This means they would be 10 quarts of oil is equal to 2.5 gallons.

What type of brake fluid does the 2015 Chevy Silverado 2500 take?

Hydraulic Brake Fluid, DOT 3. Original recommendation P/N 19299818 has been replaced by P/N 19353126. AMSOIL synthetic lubricants are the solution for drivers who want the most from their 2015 Chevrolet Trucks SILVERADO 2500 HD PICKUP.

How many quarts of oil does a 2006 Chevy Silverado 2500 HD hold?

This means they would be 10 quarts of oil is equal to 2.5 gallons. The 6.0 holds 6 quarts of oil 5w-30 conventional oil. I know this because I own a 2006 Chevy Silverado2500 HD with a 6.0-liter motor.

Conclusion 

The oil type recommended for the recommended oil type for a Chevy 2500 6.0L engine is a full synthetic 5W-30 oil that is compatible with the dexos1 Gen2 specification. 

Specifically designed to provide the highest engine protection in various weather conditions, including both cold and hot temperatures during heavy hauling and towing.

I appreciate you taking the time to go through this article. I hope that you found it useful. For any queries you’d like to ask, feel free to post your comment below.

Thank you for your time!

For more posts visit our website: https://engineoiil-capacity.com/