2014 Ford Escape 2.0 Ecoboost Oil Type, Capacity, & Change Cost

2014 Ford Escape 2.0 Ecoboost Oil Type: Are you searching for the correct oils for 2014’s Ford Escape 2.0 EcoBoost? If so, you’re at the right spot! In this article, I’ll provide all you should be aware of about the type of oil capacity, filter size, and cost of changing.

The type of oil: The preferred oil to use for Ford Escape 2.0 EcoBoost in 2014 Ford Escape 2.0 EcoBoost is 5W-30, a 100% synthetic oil. It is engineered to offer excellent protection to the turbocharged engine in any weather and driving conditions.

Capacity: The capacity of oil for Ford Escape 2.0 EcoBoost in 2014 Ford Escape 2.0 EcoBoost is 6 quarts. Make sure you fill the proper amount of oil when you change your oil, to prevent overfilling or underfilling.

Filter: The most recommended filter to use for the 2013 Ford Escape 2.0 EcoBoost is the Motorcraft FL-500S. The filter was designed in order to snare harmful contaminants from your engine to keep your engine safe and safe.

The cost of changing the oil: The average cost of changing the oil on 2014. Ford Escape 2.0 EcoBoost is about $70-$90. The price can depend on the kind of oil you choose to use and the location where you get the oil changed.

2014 Ford Escape 2.0 Ecoboost Oil Type

The recommended oil for the 2013 Ford Escape 2.0 EcoBoost is a 5W-30 synthetic oil that is 100% synthetic. It is engineered to offer excellent protection to the turbocharged engine throughout any climate and driving conditions.

Here are some well-known brands of 5W-30 oil with 100% synthetic which are compatible to the Ford Escape 2.0 EcoBoost in 2014. Ford Escape 2.0 EcoBoost:

• Motorcraft Genuine Oil 5W-30
• Castrol Edge 5W-30
• Mobil 1 5W-30
• Pennzoil Platinum 5W-30
• Royal Purple HPS 5W-30

It is crucial to remember that you must always apply the type of oil and viscosity suggested by the maker of the vehicle you are using. If you use the wrong type of oil or viscosity can damage your engine.

2014 Ford Escape 2.0 Ecoboost Oil Capacity

The oil capacity of this year’s Ford Escape 2.0 EcoBoost is 6 quarts.

Make sure you ensure that you are adding the correct amount of oil when you change your oil in order to avoid either overfilling or underfilling. In excess, your engine could cause leaks or other issues, while underfilling could result in damage to the engine.

It is equally important to choose the correct kind of oil that is suitable for your vehicle. The recommended oil for the Ford Escape 2.0 EcoBoost 2014 Ford Escape 2.0 EcoBoost is an all-synthetic 5W-30 oil.

If you’re not sure the kind of oil you should apply to your car it is always a good idea to consult the owner’s manual, or talk to a Ford dealer.

2014 Ford Escape 2.0 Ecoboost Oil Filter

The most recommended oil filter for this year’s Ford Escape 2.0 EcoBoost is the Motorcraft FL-500S. It is made to keep harmful contaminants in your oil to keep your engine safe and safe.

Here are a few other compatible oil filters to fit this year’s Ford Escape 2.0 EcoBoost:

• ACDelco PF2232G
• Wix 51348
• Fram PH95134
• K&N KN-116
• HiFloFiltro HF116

When you are choosing the right oil filter it’s essential to select an oil filter that is of the right size and type that is appropriate for your car. It is also essential to make sure the filter you choose is compatible with the type of oil you’re using.

2014 Ford Escape 2.0 Ecoboost Oil Change

1. Get the engine warm for a couple of minutes.
2. Shut off your engine, and allow it to get cool for a couple of minutes.
3. Place the drain pan for oil beneath the oil drain plug.
4. Make use of a socket or wrench to loosen the drain plug.
5. Let the oil be drained in the drainage pan.
6. After the oil has gone through it is time to replace the drain connector and secure it up with a wrench or socket.
7. Take off your old filter.
8. Apply a thin layer of fresh oil on the seal of your new filter.
9. Attach the new filter with your hand until it’s snug.
10. Inject new oil into the engine via the neck for filling oil.
11. Replace the cap that holds the oil.
12. Begin the engine, and allow it to run for a couple of minutes.
13. Verify the level of oil and add oil, if needed.
14. Switch off the engine and take out the old filter and oil in a proper manner.

People Also search for the 2014 Ford Escape 2.0 ecoboost oil type

Conclusion

I hope that this article will be helpful in answering your questions regarding the correct type of oil for the 2013 Ford Escape 2.0 EcoBoost. 

The preferred oil type is 100% synthetic 5W-30, designed to safeguard the turbocharged engine in all weather and driving conditions.

Thanks for reading this blog. I wish you an amazing day!

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – 2014 Ford Escape 2.0 ecoboost oil type

What kind of oil does the 2014 Ford Escape take?

Ford recommends using only engine oil licensed to the proper SAE viscosity grade of 5W-20 for the 2014 Ford Escape. The 2014 Ford Escape 2.0L Engine oil capacity is 4.5 Quarts. I have the 2.0L EcoBoost and the capacity is 5.7 quarts and the viscosity grade is 5w-30.

How often should I change the oil on a Ford Escape?

Engine oil change intervals: do not exceed one year or 10,000 miles (16,000 km) 2008-2012 Ford Escape motor oil change 2.5L I4 engine 1,752 Reviews

What kind of oil do you use in Your Escape?

That’s the F ull S ynthetic Motorcraft 5W-20 (” DFS ” just designates bulk 55-gallon drum packaging, ” Q FS being quarts). Assuming 5W- 20 is the speed viscosity for your engine (check your manual) that oil is fine – it meets or exceeds all the Escape Warranty requirements.

What kind of engine does Ford Escape titanium have?

Specs datasheet with technical data and performance data plus an analysis of the direct market competition of Ford Escape Titanium 2.0L EcoBoost 4WD (aut.