The 2013 Ford F-150 5.0L V8 (Coyote Engine) is one of Ford’s most reliable and powerful truck engines, widely used for towing, hauling, and daily driving. To keep this engine performing at its best, using the correct engine oil type, maintaining proper oil levels, and following regular service intervals is extremely important.
In this guide, you will learn the recommended oil type, oil capacity, oil change interval, filter information, and average oil change cost so you can properly maintain your F-150 and extend engine life.
2013 Ford F-150 5.0 Oil Type
The recommended engine oil for the 2013 Ford F-150 5.0L V8 is:
- SAE 5W-20 Full Synthetic Oil (Recommended)
- SAE 5W-20 Synthetic Blend (Acceptable)
Ford specifically engineered the 5.0L Coyote engine to perform best with 5W-20 oil, which provides fast lubrication during cold starts and stable protection at high engine temperatures.
Best Choice: Full synthetic SAE 5W-20 oil is strongly recommended for maximum engine protection and fuel efficiency.
2013 Ford F-150 5.0 Oil Capacity
Oil capacity depends on whether you replace the oil filter during service.
Oil Change Interval
Regular oil changes are essential for keeping the Coyote engine clean and efficient.
Oil Filter Information
For best performance, always replace the oil filter during every oil change.
- Recommended Filter: Motorcraft FL-500S
- High-quality aftermarket filters are also acceptable
Oil Change Cost (Estimated)
DIY Oil Change Cost
$45 – $90 (oil + filter)
Professional Service
$120 – $180 depending on location
How to Change Oil (Step-by-Step)
Common Engine Oil Problems
- Oil consumption in high mileage engines
- Oil leaks from gasket seals
- Low oil pressure warning
- Sludge buildup from missed oil changes
Signs You Need an Oil Change
- Dark or dirty oil color
- Engine ticking noise
- Reduced fuel efficiency
- Oil change warning light
- Rough engine performance
Maintenance Tips
- Always use full synthetic oil
- Change oil every 5,000–7,500 miles
- Replace filter every oil change
- Check oil level monthly
- Avoid long oil change delays
FAQ – 2013 Ford F-150 5.0 Oil
What oil does a 2013 Ford F-150 5.0 take?
It uses SAE 5W-20 full synthetic engine oil for best performance.
How many quarts of oil does the 5.0 F-150 take?
It takes approximately 7 quarts with a filter change.
How often should oil be changed?
Every 5,000 to 7,500 miles depending on driving conditions.
What is the best oil filter?
Motorcraft FL-500S is the OEM recommended oil filter.
Final Thoughts
The 2013 Ford F-150 5.0L engine is extremely durable when maintained with the correct oil type and service schedule. Using SAE 5W-20 full synthetic oil, changing it at proper intervals, and replacing the filter regularly will ensure long engine life and strong performance.
Quick Summary
- Oil Type: SAE 5W-20 Full Synthetic
- Oil Capacity: 7 Quarts
- Oil Filter: Motorcraft FL-500S
- Oil Interval: 5,000–7,500 miles
- Best Practice: Always replace filter with oil change