2012 Ford F-250 6.7 Oil Capacity, Oil Type, Filter, Change Interval & Maintenance Guide

2012 Ford F-250 6.7 Oil Capacity, Oil Type, Filter, Change Interval & Maintenance Guide

The 2012 Ford F-250 Super Duty equipped with the 6.7L Power Stroke Turbo Diesel is one of the most capable heavy-duty pickup trucks ever produced. Designed for serious towing, commercial work, hauling heavy payloads, and long-distance driving, the 6.7 Power Stroke has earned a reputation for durability and impressive torque output.

However, diesel engines demand proper maintenance, and engine oil plays a crucial role in protecting the turbocharger, fuel system, bearings, camshafts, and internal engine components. Using the correct oil capacity and oil specification helps prevent premature wear and costly repairs.

6.7L Power Stroke
13 Quarts Capacity
Turbo Diesel
Motorcraft FL-2051S
Heavy-Duty Towing

Quick Answer

The 2012 Ford F-250 6.7 Power Stroke oil capacity is 13 quarts (12.3 liters) when replacing the oil filter. Ford recommends using diesel engine oil meeting Ford WSS-M2C171-F1 specifications, typically SAE 10W-30.

2012 Ford F-250 6.7 Oil Capacity

The 6.7L Power Stroke requires significantly more oil than a gasoline engine because diesel engines operate under heavier loads and higher compression ratios. The larger oil capacity helps control engine temperatures, suspend soot particles, lubricate the turbocharger, and extend oil life.

Specification
2012 Ford F-250 6.7 Diesel
Engine
6.7L Power Stroke V8 Turbo Diesel
Oil Capacity
13 Quarts (12.3 Liters)
Oil Filter Capacity Included
Yes
Oil Type
SAE 10W-30
Oil Specification
Ford WSS-M2C171-F1

Recommended Oil Type

Ford recommends using a premium diesel engine oil specifically designed for modern emissions-equipped diesel engines. The oil must meet Ford’s diesel oil requirements and provide excellent soot handling capabilities.

Recommended Viscosity: SAE 10W-30 Diesel Engine Oil

Best Oils for the 2012 Ford F-250 6.7

  • Motorcraft Super Duty Diesel Oil 10W-30
  • Shell Rotella T6 Full Synthetic
  • Mobil Delvac Extreme
  • Chevron Delo 400
  • Valvoline Premium Blue
  • Amsoil Heavy Duty Diesel Oil

Oil Filter Information

The recommended oil filter for the 6.7 Power Stroke is the Motorcraft FL-2051S. This filter is engineered specifically for the Power Stroke lubrication system and provides excellent filtration efficiency.

Pro Tip: Always replace the oil filter whenever changing engine oil. Reusing an old filter can contaminate fresh oil and reduce engine protection.

Oil Change Interval

Ford’s Intelligent Oil-Life Monitor tracks operating conditions and calculates optimal service intervals. However, owners who tow regularly often choose shorter intervals.

Driving Conditions
Recommended Interval
Normal Driving
7,500 โ€“ 10,000 Miles
Heavy Towing
5,000 โ€“ 7,500 Miles
Commercial Use
5,000 Miles
Frequent Idling
5,000 Miles

How to Change Oil in a 2012 Ford F-250 6.7

Step 1: Warm the engine for several minutes.
Step 2: Remove the drain plug and drain old oil completely.
Step 3: Replace the oil filter.
Step 4: Reinstall drain plug with proper torque.
Step 5: Add approximately 13 quarts of approved diesel oil.
Step 6: Start engine, check for leaks, and verify oil level.

Common 6.7 Power Stroke Oil-Related Problems

Turbocharger Wear

Delayed oil changes can cause turbo bearing wear and reduced turbocharger lifespan.

Oil Dilution

Frequent regeneration cycles can introduce fuel contamination into engine oil.

Oil Leaks

High-mileage trucks may develop oil pan, gasket, or seal leaks.

Overfilling Issues

Adding too much oil can increase crankcase pressure and potentially damage seals.

Maintenance Schedule

Service Item
Interval
Engine Oil & Filter
7,500โ€“10,000 Miles
Fuel Filters
15,000 Miles
Air Filter
30,000 Miles
Coolant Inspection
Every Service

Frequently Asked Questions

How much oil does a 2012 Ford F-250 6.7 take?

The 6.7L Power Stroke requires 13 quarts (12.3 liters) of oil with a filter change.

What oil is recommended for a 2012 Ford F-250 diesel?

Ford recommends SAE 10W-30 diesel engine oil meeting WSS-M2C171-F1 specifications.

Can I use synthetic oil in my 6.7 Power Stroke?

Yes. Full synthetic diesel oil offers superior protection, especially under towing and severe-duty conditions.

What oil filter does the 6.7 Power Stroke use?

The factory-recommended oil filter is the Motorcraft FL-2051S.

How often should oil be changed?

Typically every 7,500 to 10,000 miles, although towing and severe service may require shorter intervals.

Final Thoughts

The 2012 Ford F-250 6.7 Power Stroke is engineered for extreme workloads, but its longevity depends heavily on proper maintenance. Using the correct 13-quart oil capacity, replacing the filter at every service, and following Ford’s recommended maintenance schedule will help ensure dependable performance for hundreds of thousands of miles.

Quick Specifications

  • Engine: 6.7L Power Stroke Turbo Diesel V8
  • Oil Capacity: 13 Quarts (12.3 Liters)
  • Oil Type: SAE 10W-30 Diesel Oil
  • Oil Filter: Motorcraft FL-2051S
  • Oil Change Interval: 7,500โ€“10,000 Miles
  • Towing Capability: Up to 15,000+ Pounds (Properly Equipped)