2010 Silverado 5.3 Oil Type [Update 2023] ❤️

2010 Silverado 5.3 Oil Type:  The 2010 Chevrolet Silverado 1500 is a pickup truck that is highly rated and American-made.

Taking good care of their cars is important to Chevy owners. A vital aspect of routine maintenance, that can be done at home due to its simplicity, is performing a regular oil change. If You’re considering the do-it-YourseLFApproach, do note that this Silverado takeS6 …

Understanding the Different Types of Oil

There are three main types of oil available on the market:

Conventional Oil

Conventional oil is the most basic type of oil and is recommended for drivers who are looking for an affordable option. It is derived from crude oil and is suitable for most everyday driving conditions.

Synthetic Oil

Synthetic oil is a more advanced type of oil that is designed to provide better protection for your engine. It is made up of chemical compounds that are specifically formulated to provide better performance and protection in extreme temperatures.

High-Mileage Oil

High-mileage oil is designed for vehicles that have over 75,000 miles on the odometer. It contains additives that can help reduce oil consumption and improve engine performance.

Which Oil Type is Best for Your 2010 Silverado 5.3?

When it comes to choosing the right oil for your 2010 Silverado 5.3, there are a few factors to consider:

Owner’s Manual Recommendations

Your truck’s owner’s manual will provide recommendations on which oil type is best for your specific vehicle. It is important to follow these recommendations to ensure that your engine is properly lubricated and protected.

Climate

The climate in which you drive can also affect the type of oil you should use. If you live in an area with extreme temperatures, such as very hot or very cold, synthetic oil may be a better option as it can provide better protection in these conditions.

Driving Conditions

If you frequently drive in stop-and-go traffic or engage in heavy towing, synthetic or high-mileage oil may be a better option to provide extra protection for your engine.

2010 Chevy Silverado 1500 Oil Capacity, Type, and Filter Type

For engines that run on 5W-30 in extreme temperatures or operate below the -20F temperature, 0W-30 oil may be used instead. It is essential that there are no additives in the oil of the engine.

The information in this article is taken out from 2010. Chevy Silverado 1500 Owner’s handbook unless specifically stated. Your responsibility is to sure that you are using the correct oil for your vehicle.

4.3 L V6 ENGINE

The 2010 Chevy Silverado 1500 4.3 L engine needs 4.5 Q of 5W-30 engine oil.

This also needs it also requires the ACDelco PF47 engine oil filter.

4.8 L V8 ENGINE

The 2010 Chevy Silverado 1500 4.8 L engine needs 6.0 1 q of 5W-30 engine oil.

It also requires an ACDelco engine oil filter. ACDelco-PF48 engine oil filter

5.3 L V8 ENGINE

The 2010 Chevy Silverado 1500 5.3 L engine needs 6.0 1 q of 5W-30 engine oil.

This also needs the also the ACDelco Pf48 engine oil filter.

6.2 L V8 ENGINE

The 2010 Chevy Silverado 1500 6.2 L engine needs 6.0 Q of 5W-30 engine oil.

This also needs the also the ACDelco the PF48 engine oil filter.

What is the cost I should be able to pay for 2010? Silverado?

2010 Chevrolet Silverado 1500 Retail Prices

FAQ 2010 Silverado 5.3 oil type

What kind of oil does the 2010 Chevy Silverado take?

The 2010 Silverado, as well as most other Chevrolet Silverados with a 5.3 liter Vortec engine, require synthetic oil with a viscosity rating of 5W-30. Just so you know about viscosity ratings, the first number.

How many miles does a 2010 Chevy Silverado last?

A well-maintained Silverado will likely last for more than 100,000 miles. For some drivers, this can be well over 20 years of usage. Even Silverados that haven’t been maintained regularly can exceed 150,000 miles in approximately 10 years of continuous driving.

Does Chevy Silverado need synthetic oil?

The Chevy Silverado is not a vehicle that requires synthetic oil, however, it is required for the oil to be of the requirements of certain viscosity. According to the manual for owners of the new Chevy Silverado model, it is crucial to choose engine oil that is in line with the standards of SAE 20W 0W.

How many quarts of oil does a Chevy Silverado hold?

The basic answer is that this truck can hold eight quarts of oil, and a Dexos 1 Standard Synthetic oil is recommended. Learn more about the importance of oil type in your 2016 Silverado, along with some additional details as you prepare for your truck’s next oil change.

What kind of oil does the 2016 Chevy Silverado take?

Every 2016 Silverado has an oil capacity of eight quarts. Furthermore, a Dexos 1 Standard Synthetic oil with a viscosity of SAE 0W-20 is generally recommended. Synthetic oils tend to cost more than conventional oils but will ensure better performance.

What kind of oil do you put in a Chevy 53?

There are just two types of engine oils recommended for vehicles with Chevy 5.3 engines. The oils are 5w30 and 0w20. GM Dexos-approved 5w30 oils are the best for your 1999 – 2013 Chevy 5.3 vehicles. However, the 2014 Chevy Suburban 5.3 and Tahoe 5.3 can use 5w30 oils, too.

Also, Related some Articles:

Acura RL (2005 – 2012) Engine Oil Capacity

ACURA SLX (1996 – 1999) Engine Oil Capacity

Alfa Romeo Spider Engine Oil Capacity

How Much Oil Does a Chevy Silverado Take?

It is the 2022 Chevrolet Silverado with the 5.3L 8-cyl engine (engine code L82) that consumes 8 cups (with filter) of synthetic oil 0W-20. 

This 6.2L Chevy Silverado takes 8 quarters of 0W-20 oil, with filters. The Chevy Silverado that has a 6.6L 8-cyl engine (engine code L8T) requires 8 cups (with filter) of synthetic 5W-30 oil. 

The Chevy Silverado that has a 4.3L six-cylinder engine (engine code LV3) consumes five 4 quarts (with filter) of 5W-30 or 0W-20 synthetic oils. An oil filter replacement, as well as crushing washers, are required.

Your car is equipped with an electronic device that let you know when it is time to change the oil in your engine. 

It is not determined by the mileage, but rather by the engine revolutions as well as the operating temperature. When the computer determines that the oil requires changing The Oil Life Monitor will indicate that it is required to change the oil. 

The time between oil changes will differ according to the way you drive your vehicle. Typically, it’s between three hundred miles (5 000 km) and 7500 miles (12000 kilometers) after your last oil change.

Under extreme circumstances in extreme conditions, the indicator could be activated prior to 3000 miles (5000 kilometers). 

Do not drive your car over 7500 miles (12 500 km) or 12 months (whichever is in the initial time) in the absence of an oil replacement. The system will not be able to detect dirt in your oil. 

Therefore, if you travel in an area with a lot of dust ensure that you switch your oil each three miles (5 000 km) or earlier. Make sure that you must reset your CHANGE ENGINE OIL signal when the oil has been changed.

Why Do Cars Need An Oil Change?

It is important to change your oil regularly because they keep your engine in good condition and well-lubricated. As time passes oil degrades and becomes dirty.

This could cause the formation of deposits on engine components. This can result in lower performance and more wear and wear for your motor. 

The oil changes will also make sure that your engine is running enough oil which is essential to ensure proper lubrication. 

Chevy suggests changing the oil at intervals of seven or eight miles, or once every six months, depending on what comes first.

People Also Searches 2010 Silverado 5.3 oil type

For more posts visit our website: https://engineoiil-capacity.com/