Kubota D722 Oil Type, Capacity, Filter, & Change Cost

Kubota d722 Oil Type: The maintenance of optimal oil levels and changing them often is vital to the durability And performance of the Kubota D722 motor. 

The selection of the right type of oil as well as the right filter is equally crucial to make sure that the engine is properly lubricated And protected against wear And wear and tear.

This guide is built on authentic Kubota sources and current data (January 2024) and offers a complete description of D722 specifications for engine oil as well as specifications for filtering, and the associated costs for changing.

Kubota D722 Oil Type

The engine Kubota D722 needs the highest-quality API-certified Diesel engine oil. Kubota suggests the use of their Kubota Genuine Oil (KGO) for maximum performance and protection. 

However other API CJ-4 and CF-4-rated oils are acceptable provided they comply with the following requirements:

  • Viscosity Gradient: 15W-40 (recommended for the majority of operating temperatures)
  • API Service rating: CJ-4 and CF-4 (minimum)

Kubota D722 Oil Capacity 

The capacity of the oil for Kubota’s D722 engine differs depending on the specific type and model. Below is a table that summarizes the capacities of various models:

ModelCapacity for Oil (Liters)

Kubota D722 Oil Filter

The engine of the Kubota D722 is equipped with an oil filter with a spin-on. Its official Kubota model number is 57311-15140. 

However, similar filters from other manufacturers may be utilized as long as they comply with the engine’s specifications and thread dimensions.

Kubota D722 Oil Changes

The price of changing the oil on your Kubota D722 can vary based on the following factors:

  • Locale: Labor rates can be significantly different across regions.
  • DIY Vs. Professional Services: Performing the change yourself will save you time and costs.
  • Filter and Oil Name Brands: Brands with premium quality may be more expensive than generic alternatives.

In general, it is possible to pay between $50-$100 for an oil change DIY with standard-priced oils and filters. Professional maintenance at the Kubota dealer can cost between $100-$150.

Kubota D722 Engine Specs

The Kubota D722 vertical water-cooled, three-cylinder 4-cycle diesel engine has A displacement of 0.719 L (43.88 cu in) and a maximum power output in the range of 14.9 Kilowatts (20.0 HP) at 3600 rpm. 

It is well-known for its small dimensions And fuel efficiency As well As emission-free. Here Are some essential characteristics of the Kubota D722. 

Type of EngineVertical, water-cooled, 3-cylinder, 4-cycle diesel engine
Displacement0.719 L (43.88 cu in)
Bore and Stroke67.0 mm x 68.0 mm (2.64 in x 2.68 in)
Rated Output14.9 4 kW (20.0 HP) at 3600 rpm
Maximum Torque45.8 Nm (33.8 lb-ft) at 2600 rpm
Fuel SystemIndirect injection
Starter SystemElectric starter
Cooling SystemWater-cooled
Weight63 kilos (139 lbs)
Dimensions435.1 mm (17.13 in) x 404.0 mm (15.91 in) x 564.1 mm (22.21 in)

 Kubota D722 Oil Change 

Changing the oil in a Kubota D722 engine is A straightforward process that requires A few basic tools. Here Are the steps:

  1. Warm up the engine to ensure the oil flows more easily.
  2. Remove the oil filler cap And the drain plug to drain the old oil.
  3. Replace the drain plug and fill the engine with the new oil using a funnel.
  4. Check the oil level using the dipstick Add more oil if necessary.
  5. Replace the oil filler cap and run the engine for A few minutes to circulate the new oil.

FAQ kubota d722 oil type

Where can I get the parts for my Kubota D722 engine?

Clean up Kubota D722 Series engines with filters from Diesel Parts Direct. Most parts are serial number specific. Please contact us with your engine’s information at 888.690.5812 or use our quote request form; our knowledgeable inside sales staff will gladly research and identify the correct parts for your needs.

What kind of oil is recommended for Kubota diesel?

Which Oil Should I Use in My Kubota Diesel? oil used in internal engines. You must use the proper oil and monitor the engine oil in Kubota diesel on a regular basis. It is advised to utilize… 2 Lubricant for external use. Three. Power steering.

What happens if you put too much oil in a Kubota?

If improper oil is used, it could become too thick or too thin and cause damage to the engine from overheating. This type of damage typically is not covered by warranties. A well-lubricated Kubota engine will help increase the life of the engine and ensure the best performance.

How do I maintain my Kubota diesel engine?

Regular maintenance is essential to keep your diesel engines working at peak efficiency. Something as simple as debris clogging up your Kubota oil filter can have a huge impact on the operation of your engine. When scheduling service from your technicians, make sure to have Kubota oil filters on stand-by to minimize downtime.

Also, Related some Articles:

ACURA RSX, DC5 (2002 – 2006) Engine Oil Capacity

ACURA TL (2004 – 2014) Engine Oil Capacity

Buick Rainier Engine Oil Capacity

People Also Searches Kubota d722 oil type

kubota d722 oil specs
kubota d722 fuel filter housing
kubota d722 diesel engine
kubota d722 diesel oil filter
kubota d722 oil filter number
kubota d722 engine oil capacity
kubota d722 fuel filter
kubota d722 e engine


The Kubota D722 diesel engine is A powerful and dependable diesel engine that is widely utilized in light construction equipment And industrial Applications.

It has 3 cylinders And A displacement of 0.719 liters, producing 11.1 horsepower at 3,600 rpm And 28.7 Nm of torque At 2,200 rpm. API service classification CH-4, CG-4, or CF-4 engine oil with SAE 15W-40 is recommended for this engine.

To ensure proper lubrication And engine protection, use An oil that meets or exceeds specified specifications.

For further information on the required oil for your specific Kubota D722 engine And operating conditions, check the operator’s manual or A trained mechanic.

For more posts visit our website: https://engineoiil-capacity.com/