Kawasaki fx691v Oil Type, Capacity, Filter, & Change Cost


Kawasaki fx691v Oil Type: To keep your Kawasaki fx691v engine running at peak efficiency and extend its lifespan, selecting the proper oil type is essential.

A high-performance workhorse that powers numerous pieces of machinery, such as tractors, generators, and lawnmowers, is the Kawasaki fx691v engine. But with so many different oil types on the market, picking the best one can be difficult.


In this article, I’ll look at the various aspects that influence oil selection for the Kawasaki fx691v, the various types of oils that are out there, and the best choices for this engine.

We’ll also address some frequently asked queries and offer practical advice on how to keep your engine in good working order.


 Kawasaki FX691V Oil Type

 The oil Recommended for the Kawasaki FX691V vehicle is Synthetic 10W-40 traditional oil. This oil will offer adequate protection to the engine in the majority of conditions.

However, if you reside in an area that experiences extremely hot summers or extremely Cold winters then you may be interested in applying a different viscosity to your oil.

For instance, if you reside in an extremely Hot climate then you may choose to go with 20W-50 oil. If you live in the midst of a cold climate in the winter, you may need to choose 5W-30 oil.

kawasaki FX691V Oil Capacity 

The oil capacity in Kawasaki’s FX691V engine is roughly 2.2 Liters (2.3 US quarts) when the engine is completely drained and the oil filter is replaced.

It is important to consult the owner’s manual or the specifications provided by the manufacturer for the exact capacity of oil for the specific model because there could be slight differences based on the model and modifications in the vehicle.

When adding oil to the engine or the specifications provided by the manufacturer, it is recommended to add it slowly, then check the level of oil using the dipstick to confirm the level is within the proper level. Incorrect or overfilling your engine can result in problems with the performance of your engine.

kawasaki FX691V oil Filter

The oil filter used in Kawasaki’s FX691V engine is usually identified by the component number 49065-7007.

The filter is it’s the OEM (Original Manufacturer or Equipment Manufacturer) oil filter specially made for the engine FX691V.

It is advised to use this particular oil filter or a similar filter that is in line with the specifications of the Kawasaki engine.

When replacing the filter, ensure that you adhere to the manufacturer’s guidelines and guidelines for installation.

Remaining on top of changing the filter and engine oil can help ensure high engine performance and extend the lifespan of your Kawasaki FX691V motor.

kawasaki FX691v oil Change

  1. Get the engine warm: Run the engine for 5-10 minutes to warm the oil, which makes it more fluid and easy to drain.

  2. Position the drain pan to the left: Place it beneath the oil drain plug located on the right side of the engine block.

  3. Take off the drain plug Make use of the socket 17mm and wrench loosen and take off the plug that drains oil. Let the old oil be completely drained into the pan.

  4. Replace the oil filter Look for the oil filter that is usually mounted on the outside that is on the block near the drain plug for oil. Utilize an oil wrench remove and take off the old oil filter. Place a layer of new oil on the seal of your new filter, then screw it on with your hands until it is secure.

  5. Check the level of oil: Use the dipstick to determine the level of oil. The level should be in between the “MIN” and “MAX” marks on the dipstick.

  6. Get the engine started and test the engine for any leaks. You can run the engine for a couple of minutes, then look for leaks in the oil drain plug and the oil filter.

  7. Eliminate old filter and oil properly: Take the old oil and filter to a recycling center or an auto parts store to dispose of it properly.

Also, Related some Articles:

Renault Grand Espace IV, J81 (2002 – 2014) Engine Oil Capacity

Toyota Sequoia Engine Oil Capacity

Renault Espace IV,J81 (2002 – 2014) Engine Oil Capacity

People Also Search Kawasaki fx691v oil type

Kawasaki fx691v manual
recommended oil for Kawasaki fx691v
kawasaki fx691v parts diagram
Kawasaki fr691v oil type
fx691v Kawasaki valve adjustment specs
Kawasaki fx691v specs
oil change kawasaki fx691v
Kawasaki fx691v engine


To ensure optimum performance and longevity, the right oil type for your Kawasaki fx691v engine is essential. In comparison to conventional oils, synthetic oils perform better and offer better protection, but they are more expensive.

For engines with high mileage, high-mileage oils are a great choice, while blended oils strike a balance between price and performance.

To keep your engine running smoothly for years to come, it’s crucial to select an oil type that matches your operating conditions and maintenance schedule. Choose the proper Kawasaki fx691v oil type for your engine by consulting your owner’s manual.

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – kawasaki fx691v oil type

What kind of engine does a Kawasaki FX691V have?

The Kawasaki FX691V is a 0.73 l (726 cc, 44.3 cu-in) V-twin 90° air-cooled 4-stroke internal combustion small gasoline engine with vertical shaft, manufactured by Kawasaki Heavy Industries Ltd., for general-purpose applications, commercial mowers, heavy-duty industrial and construction equipment.

What kind of oil do you use in a Kawasaki?

For optimal performance in diverse temperatures, choose Kawasaki Genuine 10W-30, 10W-40, or 20W-50 synthetic mix. Adjust oil viscosity for varying temperatures as recommended.

What kind of oil does a Kawasaki fs730v take?

While most conditions recommend 10W-40 engine oil, adjusting oil viscosity may be necessary to accommodate seasonal temperature changes. Click to see the full answer. Similarly one may ask, what kind of oil does a Kawasaki fs730v take?

Does Kawasaki oil have zinc in it?

Both Kohler and Kawasaki oils include zinc. a lubricant resistant to the heat produced by these air-cooled engines. Auto parts retailers do not carry it. Zinc-infused oils can poison catalytic converters, potentially explaining their absence from the market.