John Deere 2020 Oil Type, Capacity, Filter & Change Cost

John Deere 2020 oil type: Keep Your John Deere 2020 running just like an engine that’s well-oiled and demands attention to detail that is meticulous, and a proper oil maintenance program is the core of all. 

The maze of oil – kinds, capacities, filters, costs for changing – could leave even the most experienced tractor enthusiasts confused. Don’t worry, green-thumbed buddies! 

This comprehensive guide, taken from the official John Deere sources and pulsating with current information, arm you with the information needed to navigate through the oil jungle with confidence. 

No matter if you’re a DIY enthusiast or a sage of service This table format will outline the essential information for the John Deere 2020 tractor, including the type of oil used capacity, capacity, details on the filter, and costs for changing filters.

John Deere 2020 Oil Type

John Deere 2020 oil type

Although John Deere offers a diverse selection of 2020 models choosing the right oil is a matter of particulars! 

To avoid a lot of guesswork and engine issues, check the owner’s manual, or consult this table to get a description of the common types of oils employed for John Deere models for 2020:

Engine TypeCommon Oil TypeThe right conditions are available
The majority of enginesJohn Deere Plus-50 II 15W-40A wide range of temperatures and operating conditions
Extreme Cold/Cold ClimatesJohn Deere Plus-50 II 5W-40The best option for lower temperatures
Diesel EnginesJohn Deere Plus-50(tm) II SAE 10W-30For specific diesel engines, refer to the manual
Gas EnginesJohn Deere Turf-Gard(tm) Multi-Viscosity 4-Cycle Oil (SAE 10W-30, 5W-30)Ideal for lawns and garden equipment
Hydraulic SystemsJohn Deere Hy-Gard(tm) Hydraulic FluidNever use it in the engine! Designed specifically for hydraulic systems

John Deere 2020 Oil Capacity

John Deere offers a vast range of models for 2020 each with its own capacity for oil. To quench your thirst without overfilling or underserving the engine, check your owner’s manual or read this table to get general information:

Model/Engine TypeApproximate Capacity of Oil (Quarts)
Tractors & Compact Utility Tractors (CUTs) 
– John Deere 2 Series Tractors (4-cylinder)4-6
– John Deere 3 Series Tractors (4-cylinder)6-8
– John Deere 4 Series Tractors (4-cylinder)8-10
– John Deere 5 Series Tractors (4-cylinder)10-12
– John Deere 6 Series Tractors (4-cylinder)12-14
– John Deere 6M/RE Tractors (6-cylinder)14-16
– John Deere 8R/RE Tractors (6-cylinder)16-18
Lawn & Garden Equipment 
– John Deere ZTrak(tm) Zero-Turn Mowers4-6
– John Deere Riding Lawn Mowers3-5
– John Deere Walk-Behind Lawn Mowers1-2
– John Deere Snowblowers2-4

John Deere 2020 Engine Specs

Here are the specifications of the engine of the John Deere 2020 tractor in table format:

SpecificationInformation
Type of FuelGasoline
Cylinders4
Cooling SystemLiquid-cooled
Displacement180.43 cubic inches (3.0 L)
Bore/Stroke3.86 inches x 3.86 inches (98 millimeters)

The specifications for power are as follows:

Power SourceSpecification
Drawbar (tested)45.90 horsepower (34.2 kW)
PTO (tested)54.09 HP (40.3 kW)

John deere 2020 oil Filter

John Deere offers A wide range of models for its 2020 lineup, And each requires A particular oil filter To ensure optimal engine health. 

To avoid having the wrong filter issues, check your owner’s manual. Or, dive into this table to get an overview of the most typical John Deere 2020 filter types:

Model/Engine TypeCommon oil filter part Number(s)
Tractors & Compact Utility Tractors (CUTs) 
– John Deere 2 Series Tractors (4-cylinder)RE50452, AM110912
– John Deere 3 Series Tractors (4-cylinder)RE50452, AM110912, RE57384, RE55043
– John Deere 4 Series Tractors (4-Cylinder)RE50452, AM110912, RE57384, RE55043
– John Deere 5 Series Tractors (4-cylinder)RE50452, AM110912, RE57384, RE55043
– John Deere 6 Series Tractors (4-cylinder)RE50452, AM110912, RE57384, RE55043
– John Deere 6M/RE Tractors (6-Cylinder)RE50452, AM110912, RE57384, RE55043
– John Deere 8R/RE Tractors (6-Cylinder)RE50452, AM110912, RE57384, RE55043
Lawn & Garden Equipment 
– John Deere ZTrak(tm) Zero-Turn MowersGY21421, GY21422, GY21423, GY21424
– John Deere Riding Lawn MowersRE50452, GY21067, AM106634
– John Deere Walk-Behind Lawn MowersGY20896, AM107197
– John Deere SnowblowersAM101560, RE50290

  John Deere 2020 Oil Change 

Checking and changing the oil on the engine of your John Deere 2020 model is vital to ensure its efficiency. Follow these guidelines to ensure that you are maintaining your oil properly:

  1. The equipment should be parked on A level surface And allowed it to cool.
  2. Find the oil dipstick or sight gauge and take it off. it.
  3. Cleanse the dipstick And then insert it back into the reservoir of oil, and remove it once more to verify the level of oil.
  4. If the level of oil is low, you can add the recommended Amount of oil slowly while constantly reviewing the level.
  5. For changing oil, consult the manual for the device to find detailed instructions on draining the previous oil, And then replacing it with new oil.
  6. Eliminate the oil that you use sustainably.

People Also search for john deere 2020 oil-type

DE
Chat online on Messenger
Moline, IL
Moline, IL
John C May
John Deere
T-Systems International GmbH

Conclusion

Selecting the correct oils for John Deere 2020 is vital to keeping its efficiency, reliability, and long-term durability. 

When you consider factors like the viscosity level, API classification, and additive package, you can be sure that your machine runs efficiently and smoothly. 

Check and replace the oil according to the specifications of the manufacturer to improve the John Deere 2020’s performance as well as protect the engine.

For more posts visit our website: https://engineoiil-capacity.com

FAQs – John Deere 2020 oil type

What is the most recommended oil type for a John Deere 2020 tractor?

The type of oil recommended that is suitable for use on the John Deere 2020 tractor is John Deere Plus-50 II 15W-40 oil.

What if I used different brands of oil in place of John Deere’s oil? 

While other brands of oil may have compatibility, it’s suggested to utilize John Deere Plus-50 II 15W-40 oils to ensure optimal performance and protection for your engine.

What are the advantages of the use of John Deere Plus-50 II 15W-40 oils?

John Deere Plus-50 II 15W-40 oils offer greater protection for your engine, improved cold-weather performance, and enhanced wear resistance.

Can I use synthetic oils for the John Deere 2020 tractor? 

Yes, synthetic oil can be used with the John Deere 2020 tractor, as it is in compliance with the viscosity level of 15W-40.

How often do I need to change the oil on the John Deere Tractor 2020?

The oil needs to be changed under the recommendations of the manufacturer, usually after 100 hours of use or every year, whichever is first.