Husqvarna YTH22V46 Oil Type, Capacity, Filter & Change Cost

Husqvarna YTH22v46 oil type: Making sure that your Husqvarna YTH22V46 lawn mower runs optimally will require regular oil changes. 

This article will explore the intricacies of selecting the correct oil, its capacity, the replacement of filters, and the cost of keeping your favorite steed.

Oil Type: The right type of oil is vital to the durability and effectiveness of the Husqvarna YTH22V46. Husqvarna suggests using a synthetic 10W-30 oil specifically formulated for lawn and gardening equipment. Synthetic oils offer the best defense from wear and tear, particularly in high temperatures.

Capacity Of Oil: The Husqvarna YTH22V46 needs 1.9 Quarts (1.8 Liters) of oil to ensure optimal lubrication. Underfilling or overfilling can cause engine damage, therefore it is essential to stick to your recommended capacities.

Oil Filter: Oil filters play a crucial function in capturing harmful pollutants that can harm the engine. Husqvarna suggests changing the oil filter each when you change your oil to ensure maximum engine protection.

Oil Change Cost: While the cost for oil changes can differ depending on location and the labor cost, the average cost for oil changes is anticipated to be about $50-$70 for the complete changing of the oil service. However, doing your own oil changes can substantially lower the price which makes it a more affordable maintenance project.

husqvarna yth22v46 oil type

It is the Husqvarna YTH22V46 riding mower that runs on SAE 30 oil in general usage and SAE 5W-30 oils to combat cold temperatures. 

This is due to the fact that SAE 30 oil is thicker than SAE 5W-30 oil and it will give better protection to your engine in higher temperatures. 

SAE 5W-30 oil is thicker than SAE 30 oil and will flow more efficiently in cooler temperatures, which makes it easier to start the engine.

Here is the table that summarizes the oil recommendations for the Husqvarna riding mower YTH22V46:

TemperatureOil Type
Above 32 degrees FahrenheitSAE 30
Below 32 degrees FahrenheitSAE 5W-30

husqvarna yth22v46 oil Capacity

The capacity of the oil on this model of Husqvarna YTH22V46 is 64 ounces (1.9 liters). It is advised to use 10W-30 oils for this model. In order to change the oil the engine will need 2 quarters of oil. 

It is important to note the fact that this is the capacity of oil for the engine and not for the transmission. 

The transmission is equipped with a separate limit of oil that is 12 ounces (0.35 Liters). It is advised to make use of SAE 30 oil for the transmission.

Here is an overview of the capacities of oil for the Husqvarna YTH22V46

ComponentOil CapacityRecommended Oil Type
Engine64 Ounces (1.9 Liters)10W-30
Transmission12 Ounces (0.35 Liters)SAE 30

husqvarna yth22v46 oil Filter

It is the Husqvarna YTH22V46 oil filter part number 492932S. It is also referred to in the Briggs & Stratton 492932S oil filter. This filter is compatible with the following Husqvarna lawnmowers:

  • YTH18542
  • YTH22V46
  • YTH24V48
  • YTA22V46
  • YTA24V48

The filter for oil should be replaced every 50 hours or at least once per year, whichever is first. In order to replace the filter one will require a socket wrench as well as the oil filter wrench. It is important to dispose of the old oil filter. will also have to remove the old oil filter correctly.

husqvarna yth22v46 oil Change Kit

If you’re searching for an oil-change kit to fit the Husqvarna riding lawn mower YTH22V46 usually includes the following components:

  1. Engine oil: usually 2 quarts of oil which are in compliance with the specifications previously mentioned (API SJ or greater SAE 10W-30, 5W-30, or SAE).
  2. It is an oil filter: an oil filter that is compatible with the YTH22V46 like”the “Husqvarna 531307043” or “Briggs & Stratton 696854” filter.
  3. Drain pan: A drain pan is a vessel that holds and captures the old oil while taking it out of the engine.
  4. Funnel: To assist you put the new oil in your engine with no spills.

These are typically sold with an oil-change kit in order to facilitate the process for customers. The kits are available in authorized Husqvarna dealers and online retailers as well as specialist retailers of lawn and garden equipment. 

Make sure that the kit matches the YTH22V46 models to be sure that you have the correct components for the specific mower you have.

Husqvarna YTH22V46 Oil Change

The process of changing the oil inside the Husqvarna YTH22V46 engine is a simple procedure that needs to be carried out often to keep the engine in good working order. Follow these steps for changing the oil:

  1. Place the mower on level ground and make sure that your engine stays cool.
  2. Unscrew the cap on the oil filler and dipstick.
  3. Install a suitable container under the plug to drain the oil.
  4. Unplug the drain and let the oil drain completely.
  5. Change the plug and secure it with a secure.
  6. Fill the engine up with the recommended amount of oil to the correct level indicated on the dipstick.
  7. Reinstall the cap for oil fill and dipstick.

People Also Searches husqvarna yth22v46 oil type

husqvarna yth22v46 owner’s manual
husqvarna yth22v46 problems
husqvarna yth22v46 manual
husqvarna yth22v46 price
husqvarna yth22v46 parts diagram
husqvarna mowers yth22v46 reviews
husqvarna yth22v46 belt diagram
husqvarna yth22v46 parts manual

Conclusion

Making sure you use the correct type of oil is crucial to ensure the effectiveness and longevity of your Husqvarna YTH22V46 lawnmowers. 

Routine oil replacements and regular cleaning will make sure that the mower runs optimally and allow you to have an aesthetically pleasing lawn in a snap. 

Following the advice given in this article you will enjoy the durability and efficiency that Husqvarna YTH22V46 is renowned for.

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – husqvarna yth22v46 oil type

What engine does a Husqvarna yth22v46 have?

The Husqvarna YTH22V46 is equipped with a 0.7 L V-twin gasoline engine and belt-driven hydrostatic transmission with infinite forward and reverse gears. The Husqvarna YTH22V46 lawn tractor used the Briggs & Stratton 407777 engine.

What kind of oil do you use in a Husqvarna mower?

The Husqvarna YTH22V46, a riding mower with a 46-inch mowing deck, uses SAE 30 oil for general use of the mower, and SAE 5W-30 for cold weather. These numbers refer to oil viscosity, and changing the type of oil for cool weather will aid in starting. Therefore, what oil do I use in my Husqvarna push lawn mower?

What kind of engine does a Husqvarna lawn tractor have?

The Husqvarna YTH22V46 lawn tractor used the Briggs & Stratton 407777 engine. It is a 0.7 L, 656 cm 2, (40.0 cu·in) V-twin natural aspirated gasoline engine with 75.4 mm (2.97 in) of the cylinder bore and 73.4 mm (2.89 in) of piston stroke. This engine produced 22.3 PS (16.4 kW; 22.0 HP) of maximum output power.