Honda GX270 Oil Type, Capacity, Filter & Change Cost


Honda GX270 Oil Type: ensuring that your Honda GX270’s engine has the right oil type capacity, capacity, filter and frequency of change is essential to ensure optimal performance and long-lasting. 

This article explains the most important elements that are involved in Honda GX270 engine oil maintenance helping you keep your engine operating smoothly and efficiently.


I’ll discuss what type of oil is recommended capacity, type, and filter you’ll need for the Honda GX270 engine, as well as the recommended intervals to change oil. 

In addition, I’ll offer insights on the costs associated with oil changes as well as the tools and equipment you’ll require to complete the job yourself.


If you follow these tips to protect you and your Honda GX270 engine from premature wear and tear, thus extending the life of your engine and maximizing its performance.

Honda gx270 Oil Type

The Oil Recommended to use for the Honda GX270 engine is 10W30, four-stroke oil. But, you may Also make use of 15W40 engine oil if the temperature in the air is higher than 40 degrees F (4 degrees C). Synthetic oils Are an excellent option since they are more efficient And provide protection during extreme weather.

Here are a few of the top oil choices That Honda GX270 engine owners can use:

  • Honda 4-Stroke 10W30 Engine Oil
  • Valvoline SynPower Synthetic Full Synthetic Synthetic 10W30 Motor Oil
  • Royal Purple HPS 10W30 Motor Oil
  • Mobil 1 Extra Performance 10W30 Motor Oil

Honda gx270 Oil Capacity

The Honda GX270 motor has an oil capacity that is 1.16 US Qt or 1.1 Liters. Checking the oil regularly is essential to prevent engine damage. The Oil alert system (applicable type) will stop your engine when the oil level gets too low.

Honda gx270 oil filter

The original Honda GX270 oil filter is part number 15410-ZF6-000. It’s a spin-on filter that has an element for filtering made of cellulose. 

The filter is equipped with an opening valve for a bypass that opens in the event that the filter gets blocked and allows oil to pass through the filter and flow through the engine.

Here’s a table that examines the specifications of the engine oil filter of the Honda GX270 and some of the most well-known aftermarket alternatives:

FeaturesOriginal Honda GX270 Oil FilterK&N HP-1005Champion LF-54Wix 51062
Part Number15410-ZF6-000HP-1005LF-5451062
Filter Element MaterialCelluloseCelluloseCelluloseCellulose
Filter By-Pass ValveYesYesYesYes
Bypass Valve Pressure10 psi10 psi10 psi10 psi
Thread SizeM20 1.5 1.5M20 1.5 1.5M20 1.5 1.5M20 1.5 1.5
Approximate Filter Rating22 microns22 microns22 microns22 microns

 Honda GX270 Oil Change 

To ensure optimal performance of your engine It is vital to inspect and change your Honda GX270’s engine oil every so often. The procedure for doing this is described in this step-by-step guide:

  1. Locate the oil cap and dipstick.
  2. Take off the cap of the oil and clean the dipstick.
  3. The dipstick must be put back into the hole for oil filling without needing screws.
  4. Examine the oil by taking it off and inspecting the dipstick. There should be an arc connecting the high mark and low marks on the dipstick.
  5. Make sure the oil is at the correct level, and then add the recommended type that is added slowly.
  6. For changing the oil locate the drain plug on the engine. Put a pan underneath it.
  7. Remove the oil completely, by unscrewing your drain plug.
  8. Install and connect the drain plug when it has been drained.
  9. Don’t overfill. Use the recommended oil for your engine.
  10. Allow the engine to run for a couple of minutes after applying oil.
  11. Finally, shut off your engine and test your oil using a dipstick.

People Also search for Honda Gx270 oil-type

gx270 honda manual
honda gx270 shop manual pdf
honda gx270 oil level
honda gx270 spark plug gap
honda gx270 engine oil
oil capacity honda gx 270
honda gx270 oil weight
gx270 honda engine


It is important to choose the correct oil for your Honda GX270’s engine. This will ensure its performance And longevity. 

You can protect your engine by following the manufacturer’s instructions and taking into consideration factors like operating conditions And maintenance schedules. 

To maintain the Quality of your oil and to Remove contaminants, you should regularly change And check it. You can increase the efficiency And reliability of your Honda GX270 by using the Recommended oil.

For more posts visit our website:

FAQs – Honda Gx270 oil type

What kind of engine does a Honda GX270 have?

The Honda GX270 K1/T1/UT1 is a 0.27 l (270 cc) air-cooled single-cylinder (inclined by 25 °) four-stroke internal combustion small gasoline (petrol) engines manufactured by Honda Motor Company.. This engine has an OHV design with two valves; sophisticated air intake system; large capacity, multi-chamber exhaust system; heavy-duty recoil starter.

What kind of oil does a Honda gx340 take?

What kind of oil does a Honda gx340 use? GX340 GX390 Oil Capacity 1.16 US qt (1.1 L) 1.16 US qt (1.1 L) Fuel Tank Capacity 6.4 U.S. qts (6.1 liters) 6.4 U.S. qts (6.1 liters) Fuel Unleaded 86 octane or higher Unleaded 86 octane or higher Dry Weight 69 lb (31.5 kg) 69 lb (31.5 kg)

Is the Honda GX340 engine interchangeable with the GX270?

The dimensions and outward appearance, however, remained virtually unchanged, in order to guarantee 100% interchangeability with the older GX270 -engines. Maintenance data. One may also ask, what kind of oil does a Honda gx340 take? The Honda GX340K1 produces 11.0 HP (8.2 kW) at 3,600 rpm and 24 Nm (2.4 kg·m, 17.0 ft·lb) of torque at 2,500 rpm.

What kind of oil does a Honda small engine take?

Oil capacity: 1.16 US qt (1.1 L) Fuel tank capacity: 6.4 U.S. qts (6.1 liters) Fuel: Unleaded 86 octane or higher. Dry weight: 69 lb (31.5 kg) What type of oil does a Honda small engine take? Under normal operating conditions, where the air temperature is between 0 and 100 degrees Fahrenheit, Honda recommends using SAE 10W-30 oil.