FR730v Oil Type, Capacity, Filter & Change Cost

FR730v Oil Type: Are you looking for a way to replace the oil on your Kawasaki engine? Don’t look any further! We’ll discuss all you should know about oil type capacity, filter, and the cost to change it for your engine.

The type of oil: The Kawasaki FR730V engine requires a synthetic oil of 10W-40. Synthetic oil is more beneficial in the long run for engines than standard oil because it offers greater defense from wear and tear, particularly in extreme temperatures.

Capacity for Oil: The oil capacity for the Kawasaki FR730V engine is 2.2 Quarts. Make sure you check the owner’s manual to determine the exact capacity as it can vary based on the trim levels and other options on the engine.

Oil Filter: The suggested oil filter that is suitable for the Kawasaki FR730V engine is Kawasaki Genuine Oil Filter 49065-7007. This filter is available in most auto parts stores.

Price of Oil Change: The average price for changing the oil on the Kawasaki FR730V engine is between $30 and $50. The cost will differ based on the location you have your oil changed as well as the type of oil you are using.

fr730v oil type

FR730v Oil Type

Here are some kinds of oils and brands that work with this FR730V engine:

  • Kawasaki Genuine Oil 10W-40 Synthetic
  • Mobil 1 10W-40 Synthetic
  • Amsoil Synthetic 10W-40
  • Royal Purple Synthetic 10W-40
  • Castrol GTX Synthetic 10W-40

It is crucial to remember that the type of oil used and its viscosity will vary based on the operating and climate conditions of your vehicle. Make sure you consult the owner’s manual for specific guidelines for your engine.

Kawasaki FR730v Oil Capacity 

Certainly! The capacity of the oil in the Kawasaki FR730V engine may differ based on the particular model and the manufacturer of the engine. 

But, as per Kawasaki’s specifications, the FR730V engine is able to handle approximately 2.1 quarters (2.0 Liters) when the filter is changed. 

It is essential to check the manual of your owner or consult with a professional technician to find the right capacity of your oil for your particular engine. The correct amount of oil will make sure that the engine you have is functioning and well-lubricated.

GENERAL INFORMATION

Engine Specifications

ModelFR730V
Type4-stroke, OHV, V-twin 90°
Displacement726 cm 3 (44.3 cu-in)
Max. horsepower22.6 PS (16.6 KW; 22.2 HP) at 3,600 rpm
24.3 PS (17.9 KW; 24.0 HP) at 3,600 rpm
Max. torque (crank PTO)54.3 Nm (5.5 kg·m; 40.0 ft·lb) at 2,000 rpm
53.9 Nm (5.5 kg·m; 39.8 ft·lb) at 2,200 rpm
CarburetorInternally vented with fuel shut-off solenoid
Cooling systemAir-cooling
Ignition systemElectronic spark ignition
Lubricating systemFull pressure with spin-on oil filter
Starting systemBendix type starter
Charging system13A or 20A charge coil (option)
Fuel usedUnleaded gasoline (octane number 86 or higher)
Fuel consumption245 g/HPh
Cooling systemPressurized forced circulation type

kawasaki fr730v oil filter

Yes, the oil filter on Kawasaki’s FR730V engine could differ depending on the maker and the type of filter. Here are the most common parts numbers for oil filters for the FR730V engine:

  • Kawasaki 49065-7007
  • Briggs & Stratton 696854
  • Fram PH8170
  • WIX 57035
  • Purolator L10241

It is essential to read the owner’s manual or talk with a certified mechanic to identify the appropriate oil filter to fit your specific engine. Making sure you use the right oil filter will make sure that the engine you have secured and operating smoothly.

kawasaki fr730v oil change

Certainly! Below are some steps you need to follow to make the oil replacement on the Kawasaki FR730V motor:

  1. Start the engine by running the engine for a couple of minutes.
  2. Shut off the engine, and then locate the drain plug for oil, typically located in the lower part of the side of your engine.
  3. Install a drain pan underneath the drain plug for oil and remove the plug with a wrench or socket.
  4. Let the oil be completely drained into the drainage pan.
  5. When the oil is draining take the filter off by using the wrench for the oil filters.
  6. Install a new filter, by applying a fine layer of oil on the gasket before securing it to the engine.
  7. After the oil is been drained, install the drain plug, and make sure you tighten it according to the torque specifications specified in the owner’s guide.
  8. Make sure to fill the engine with the appropriate quantity and type of oil by using a funnel in order to keep spills out.
  9. Examine the oil level using the dipstick; if necessary, add extra oil to reach the required level.
  10. To circulate fresh oil throughout the engine, turn the key to the on position and let the engine run for a few minutes.
  11. Switch off the engine, and check the level of oil by adding more oil as required.
  12. Properly dispose of the old oil and filter in accordance with local regulations.

It is essential to follow the recommendations of the manufacturer for the type of oil and its capacity and to change your oil according to the recommended frequency in order to ensure your engine is running effortlessly.

People Also Searches fr730v oil type

fr730v oil filter cross reference
recommended oil for Kawasaki fr730v
Kawasaki fr730v oil change
Kawasaki fr730v oil amount
Kawasaki fr730v oil change kit
Kawasaki fr730v engine oil
oil for Kawasaki fr730v
fx730v oil type
fr730v oil filter cross reference
recommended oil for Kawasaki fr730v
Kawasaki fr730v oil change
Kawasaki fr730v oil amount
Kawasaki fr730v oil change kit
Kawasaki fr730v engine oil
oil for Kawasaki fr730v
fx730v oil type

Conclusion:

The right type of oil for the FR730v engine is essential to ensure optimal performance and long-lasting.

You’ll be able to choose the right oil if you consider the recommended types, the factors to consider, and the benefits.

To keep your engine running smoothly for years, follow the maintenance schedule, including oil changes.

 For more posts visit our website: https://engineoiil-capacity.com/

FAQs – fr730v oil type

What is a Kawasaki fr730v?

The FR730 delivers Kawasaki professional-grade power to tame any homeowner’s landscape challenge. Click to see the full answer. Likewise, how much oil does a Kawasaki fr730v take?

What makes the fr730 so special?

The FR730 delivers Kawasaki professional-grade power to tame any homeowner’s landscape challenge. This forced air-cooled v-twin engine has a rotating grass screen and electronic spark ignition.

What kind of oil does a Kawasaki fr691v take?

Although 10W-40 engine oil is the recommended oil for most conditions, the oil viscosity may need to be changed to accommodate seasonal temperature changes. What oil filter fits a Kawasaki fr691v? The Oil Filter for Kawasaki 22 – 24 HP Engines is designed for use with Kawasaki engine models FR651V-AS04, FR691V-AS04, and FR691V-AS05.

What kind of oil does a Kawasaki fs730v take?

Although 10W-40 engine oil is the recommended oil for most conditions, the oil viscosity may need to be changed to accommodate seasonal temperature changes. Click to see the full answer. Similarly one may ask, what kind of oil does a Kawasaki fs730v take?