The 2017 Jeep Cherokee 3.2L V6 (Pentastar engine) is a reliable midsize SUV engine designed for smooth power delivery and everyday driving. Proper oil selection and timely maintenance are essential to keep this engine running efficiently and prevent long-term wear.
This engine is sensitive to oil quality, and using the correct viscosity ensures proper lubrication for timing components, fuel economy, and engine cooling. In this guide, you’ll find the correct oil type, capacity, change interval, cost, and maintenance tips.
2017 Jeep Cherokee 3.2 Oil Type
The recommended oil type for the 2017 Jeep Cherokee 3.2L V6 engine is SAE 5W-20 full synthetic oil. This viscosity is designed to provide optimal lubrication across all temperature ranges and ensure smooth engine performance.
Using high-quality synthetic oil that meets API SP or Chrysler MS-6395 standards is strongly recommended for better protection, reduced engine deposits, and improved fuel efficiency.
Best Overall Choice: SAE 5W-20 full synthetic oil provides the best balance of protection, fuel efficiency, and cold-start performance for this engine.
2017 Jeep Cherokee 3.2 Oil Capacity
Oil capacity may vary slightly depending on engine condition and whether the oil filter is replaced. Always verify final oil level using the dipstick after refilling.
2017 Jeep Cherokee Oil Change Interval
Oil change intervals depend on driving conditions and oil life monitoring system usage. However, real-world maintenance often requires earlier changes.
Driving Condition | Recommended Interval |
|---|---|
Highway Driving | 5,000 – 7,500 miles |
City / Stop-and-Go Traffic | 3,000 – 5,000 miles |
Off-Road / Heavy Load Use | 3,000 – 4,500 miles |
Severe Conditions | 3,000 – 5,000 miles |
2017 Jeep Cherokee Oil Change Cost
Oil change cost depends on location, oil type, and service type (DIY vs professional).
- DIY Oil Change: ₹500 – ₹1,200
- Local Workshop: ₹1,200 – ₹2,500
- Authorized Service Center: ₹2,500 – ₹4,000
- Full Synthetic Oil: Slightly higher but necessary for engine protection
How to Change Oil in 2017 Jeep Cherokee 3.2
Common 2017 Jeep Cherokee 3.2 Engine Problems
Oil Filter Housing Leaks
Cracks or gasket wear may cause oil leakage around the filter housing.
Oil Consumption
Some engines may consume oil faster under heavy driving or high mileage.
Low Oil Pressure Warning
Often caused by low oil level or delayed oil changes.
Frequently Asked Questions (FAQ)
What oil does a 2017 Jeep Cherokee 3.2 take?
It uses SAE 5W-20 full synthetic engine oil.
How much oil does it hold?
Approximately 5.9 quarts with filter change.
How often should oil be changed?
Every 3,000–7,500 miles depending on driving conditions.
Is synthetic oil necessary?
Yes, full synthetic oil is strongly recommended.
What is the most common issue?
Oil filter housing leaks are one of the most reported issues.
Final Thoughts
The 2017 Jeep Cherokee 3.2L engine performs best with clean, high-quality 5W-20 synthetic oil and consistent oil changes. Proper maintenance helps prevent leaks, oil pressure issues, and long-term engine wear.
Quick Summary
- Oil Type: 5W-20 Full Synthetic
- Oil Capacity: ~5.9 Quarts
- Change Interval: 3,000 – 7,500 Miles
- Key Issue: Oil filter housing leaks