2017 6.7 Cummins Oil Type, Capacity, Filter & Change Cost

2017 6.7 Cummins Oil Type: Proper maintenance of your engine is vital to ensure the durability And performance that you can expect from your new 2017 Ram 2500 and 3500 equipped with a 6.7L Cummins turbocharged diesel engine. 

Regular oil changes are essential and ensuring you use the correct oil size, type, And filter is crucial. This guide will help you understand these essential aspects, making sure that you have 6.7L Cummins purrs like a kitten.

Its Oil Type is: Cummins recommends using the highest-quality synthetic oil of 5W-40 or 15W-40 in the 6.7L Cummins. Synthetic oil is superior in protection and lubrication, particularly when temperatures are extreme.

Capacity for Oil: The 6.7L Cummins engine’s capacity for oil is around 12 Quarts (11.4 Liters). Be sure to fill it with the right amount of oil to ensure the proper levels of lubrication.

Oil Filter: A recommended filter to use for your 6.7L Cummins is a high-efficiency Mopar 90915-DA1 filter. This filter efficiently traps impurities And ensures the flow of clean oil into your motor.

Price of Oil Change: The cost of an oil change by a professional can range from $130 to $180. However, completing an oil change yourself could reduce your expenses by a substantial amount. DIY oil change kits usually cost about $50, which includes a filter, oil, And other items.

2017 6.7 Cummins Oil Type

Here are a few important points about 2017. 6.7 Cummins oil type:

• The oil type that is recommended that is recommended for this motor would be SAE 15W-40, or SAE 5W-40 synthetic full in accordance with.
• The capacity of the oil in this motor is US quarters, according to the information in.
• Cummins specifically suggests two Valvoline oils for their engines. This oil, 15W-40 is recommended for temperatures of 0°F and the 5W-40 oil is designed intended for temperatures that are extremely cold as per.
• Shell Rotella T6 5W40 Synthetic oil can also be a very popular choice for 6.7 Cummins owners, as stated in.
• It is important to use the manufacturer-recommended oil type to ensure the longevity and performance of your vehicle, as older models of the 6.7 Cummins engine tend to consume oil in excess, often due to flawed seals, as stated in.
• It is recommended to check your oil levels frequently. is a great way to avoid frequent top-ups, which is mentioned in.

2017 6.7 Cummins Oil Capacity

Here’s everything you should know about 2017. 6.7 Cummins oil capacity:

• The capacity of oil in Cummins’ 6.7-liter Cummins engine is 12 three gallons or a quarter of a quart as specified in.
• If you do not change the filter, it is estimated that the 6.7 Cummins oil capacity is 10.5 Quarts, as stated in.
• It is vital to know how much oil your 6.7 Cummins needs can also differ based on the frequency at which you replace the filter as specified.
• It is recommended to check your oil levels frequently. is a good idea to avoid frequent topping-ups since earlier models of 6.7 Cummins engine tend to use oil in excessive amounts, usually because of faulty seals as discussed in.
• It is important to use the manufacturer-recommended oil type to ensure the longevity and performance of your vehicle, as stated in.

2017 6.7 Cummins Oil Filter

Here’s what you need to be aware of concerning the 2017 6.7 Cummins oil filter:

• The Fleetguard LF16035 Stratapore oil filter is a well-known choice to use with 6.7 Cummins engines, according to.
• The Fleetguard LF16035 Stratapore oil filter has been specially made for long-term service environments, as described in.
• It is crucial to replace the oil filter frequently to keep your engine in good health because a blocked filter can cause the engine to be damaged, according to the description.
• A certified mechanic or owner’s manual must be reviewed to confirm if your vehicle is of a later model year since older models might have little or more oil, as described.
• It is essential to have your 6.7 Cummins oil capacity level exactly right, as excessive or insufficient fuel in your engine could be dangerous, as discussed.

2017 6.7 Cummins Oil ChangeSure.

Here is a guide on how to change the oil in a 2017 6.7L Cummins engine.

1. The engine should be warmed up for 5 to 10 minutes. This will aid the oil flow more smoothly.
2. Switch off the engine and allow it to rest for 10 mins. This allows the fluid to go into the sump.
3. Place the drain pan for oil underneath the drain plug for oil which can be found on the side of the engine that is on the passenger side.
4. Remove the drain plug for oil using a wrench.
5. When the plug for draining oil is in place, remove it with your hands. Be cautious that you do not spill oil.
6. Let the oil be completely drained into the drain pan.
7. After the oil has gone completely, change the drain plug for oil and tighten it up to 35 feet pounds.
8. Clean your old filter.
9. Apply a thin layer of new oil on the gasket of the new oil filter.
10. Attach the new oil filter by hand until it’s snug.
11. Add 12 quarts of fresh fuel to the motor.
12. Begin the engine, and allow it to run for a couple of minutes.
13. Examine for leaks.
14. Shut off your engine, and allow it to sit for a couple of minutes.
15. Make sure the oil is at the right level, and add oil if needed.

People Also Searches 2017 6.7 Cummins oil type

Conclusion

Selecting the right oil for 2017. 6.7 Cummins engine is essential to ensure its performance, effectiveness, and longevity. 

If you follow the OEM recommendations, weigh the driving conditions, and follow an established maintenance program, you’ll be able to keep your engine in top shape and reap the benefits of enhanced efficiency and efficient fuel consumption

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – 2017 6.7 Cummins oil type

What kind of oil does a 6 7 Cummins take?

According to the user guidelines, the 6.7 Cummins oil type seems to be API CJ-4/SL designated 15W40 oil. 5W40 oil is also suitable. Manufacturer-Recommended Engine Oil for 6.7 Cummins As always, if you want to be a happy truck owner, you better listen to the manufacturers.

What kind of oil does the 2019 Cummins 400 take?

The 2019 Cummins diesel engine features 400 hp @ 2,800 rpm with 1,000 lb-ft of torque @1,800 rpm. The recommended oil type for this engine is SAE 15W-40 or SAE 5W-40 full synthetic.

How many quarts of oil does a 2018 Cummins take?

The oil capacity of this engine is 12 US quarts. The 2018 Cummins diesel engine features 385 hp @ 2,800 rpm with 930 lb-ft of torque @1,700 rpm. The recommended oil type for this engine is SAE 15W-40 or SAE 5W-40 full synthetic. The oil capacity of this engine is 12 US quarts.

How can I prolong the interval for changing oil using the use of synthetic oils?

Using synthetic oil could allow for longer intervals between oil changes, in comparison to conventional oil. But, it is essential to adhere to the guidelines provided by the manufacturer and suggestions for your particular engine model. Things like load, driving conditions, and operating temperatures may affect the interval between oil changes.

Does a Cummins require more oil than other engines?

Limits the frequency of top-ups. A 6.7 Cummins engine is a powerhouse with impressive horsepower and torque. It also means your oil undergoes a lot more strain than it would with a weaker system. Cummins requires a fair bit of oil, though older models tend to consume it in excess (often due to flawed seals).

What are the suggested oils for the new 6.7 Cummins engine?

The 2017 6.7 Cummins engine needs high-quality diesel engine oil that aligns with its manufacturer’s specifications. The type of oil recommended is typically a high-performance, synthetic diesel engine with low-ash oil that has a viscosity of 15W-40.