2015 Ford Fusion Oil Type: What is the best oil for your Ford Fusion in 2015? Your luck is in! In this post, we will tell you how to maintain your Fusion for many more years.
Oil: Ford advises you to use a blend of synthetic oils with viscosities 5W-20 or 5-W-30. Full synthetic oils are also an option, especially for those who live in hot climates or travel in heavy traffic.
Engine type: Different engine types will have different oil capacities. The oil capacity for 1.5L EcoBoost engines is 5.7 Quarts. For the engine 2.0L EcoBoost the oil capacity is 6 quarts. For the 2.5L, it is 6.8.
Filter: A Motorcraft FL-500S oil filter is recommended for your Ford Fusion 2015. This Ford-specific filter provides excellent engine protection.
Oil-change cost: On average, an oil-change for a Ford Fusion from 2015 will cost between $64 and $78. However, actual costs will vary depending on the type of oil used, the labor cost at the shop, and any additional services.
2015 Ford Fusion Oil Type
The preferred oil type for Ford Fusion for the year 2015 is 5W-20 synthetic oil. Ford Fusion is 5W-20 synthetic oil. This oil type is designed to shield your engine under any driving conditions and at all temperatures.
Ford recommends the Motorcraft oil filter however any good quality oil filter made specifically for the Fusion engine is able to work.
Here are some well-known brands of synthetic 5W-20 that you can utilize in your Ford Fusion for 2015. Ford Fusion:
- Mobil 1
- Castrol
- Valvoline
- Pennzoil
- Quaker State
- Royal Purple
The year 2015 Ford Fusion Oil Capacity
Its capacity for engine oil in the Ford Fusion in the 2015 Ford Fusion depends on the type of engine. Below are the specs for different types of engines:
- 1.5-liter engine:
- Oil’s capacity is 4.1 Liters (4.4 Quarts) from 5W-20 oils
- 2.0-liter EcoBoost and 2.5-liter 4-cylinder engines:
- Its oil capacity is 4.3 Quarts of 5W-20 oil
- 2.5-liter engine:
- Oil capacity: 5.71 quarts (5.4 liters)
It is essential to remember that the oil filter should be replaced each time you change oil, unless the manual of your car’s owner recommends otherwise.
Always refer to the owner’s manual or a trusted mechanic to obtain the most current and accurate details about the power of your oil as well as maintenance requirements specific to the automobile you own.
2015 Ford Fusion oil Filter
The filter that is used to filter the oils of Ford Fusion 2015 Ford Fusion 2015 Ford Fusion is dependent on the type of engine. Here are the most common filter types available for various engines:
- 2.5L four-cylinder engine: When you own a 2.5L engine, it is suggested to install an oil filter number that could be similar to Motorcraft FL-910S, or a similar model from another brand which are trusted.
- 1.5L (or 1.6L EcoBoost 4-cylinder engines: The oil filter for these engines might include the Motorcraft FL-910S or an equivalent.
- 2.0L EcoBoost 4-cylinder engine: The oil filter for the 2.0L EcoBoost engine could be the Motorcraft FL-910S or an equivalent filter.
It’s essential to read the owner’s guidebook of your car or call a Ford Auto Parts Shop or dealership to get the exact part number for the oil filter that matches the model of engine you’ve got.
A properly fitted oil filter can ensure efficient protection and filtering of your engine during the process of changing your oil.
2015. Ford Fusion Oil Change
These are steps you need to follow to make sure you change your oil for the Ford Fusion in 2015. Ford Fusion:
- Place your Fusion on an even surface, then turn off your engine.
- Unscrew the hood, and then locate the cap for filling up with oil. The cap should be removed and placed on it aside.
- Install an oil-draining pan underneath the drain plug. It is situated at the bottom of the pan.
- Utilize a wrench to unlatch the plug that drains the oil. let the oil be drained through the pan.
- Once the oil is evaporated replace the drain plug, and then tighten the bolt up with a wrench.
- Remove the old filter from your engine by using the oil filter wrench.
- Apply a thin coating of fresh oil on that gasket of the oil filter that has been replaced.
- Install the new filter on the engine by hand until it’s snug.
- Introduce new oil to the engine by using the neck of the oil filler.
- Replace the cap for the oil filler and then start the engine.
- Allow the engine to run for a few minutes in order to let the oil circulate.
- Verify the level of oil and add oil if needed.
- Switch off the engine and shut the hood.
People Also search for the 2015 Ford Fusion oil type
| 2015 Ford Fusion Oil requirements |
| recommended oil for Ford Fusion |
| 2015 Ford Fusion Oil specs |
| 2015 Ford Fusion Oil change |
| best oil for Ford Fusion |
| 2015 Ford Fusion oil capacity |
| Ford fusion hybrid oil type |
| 2016 Ford Fusion Oil recommendation |
Conclusion
Hopefully, this article has answered your questions regarding the oil type recommended for your Ford Fusion 2015, but please check your owner’s guide for more specific information. You can also contact a qualified mechanic if you still have questions.
You are welcome! Hope you have a fantastic day!
I used an emoji in the end to give it a positive, friendly feel. I thanked the reader and wished a good day to them.
For more posts visit our website: https://engineoiil-capacity.com/
FAQs – 2015 Ford Fusion Oil type
What kind of oil does the 2015 Ford Fusion take?
When equipped with the 1.5-liter engine, the 2015 Ford Fusion uses 4.1 liters (4.4 quarts) of 5W-20 oil. The 2.0-liter EcoBoost and 2.5-liter 4Cylinder both take 5.4 liters (5.7 quarts) of fluid with the same viscosity. SAE 5W-20 is a synthetic oil that reduces friction, prevents corrosion, and cools the engine. It even enhances fuel economy.
How do you reset the oil in a 2012 Ford Fusion?
Ford Fusion 2010 -2012 Oil Reset Press the SETUP button twice. On the info screen below your tachometer, “Oil Life Remains XX%” should appear. When you are on this screen, press and hold the RESET button. It resets your oil life monitor and shuts off the oil change oil soon. Top-rated synthetic oil for Ford Fusion
What kind of oil does a 2014 Ford F-150 take?
All Ford F150s manufactured from 2004 to 2014 will take this type of oil; the exception is the Ford F-150 with an Ecoboost 3.5L V6 engine. Ford Fusion Motor Oil Recommendations Ford Fusion Motor Oil Amalie Oil Pro High-Performance SAE 5W-20 Synthetic Blend Motor Oil. Mobil 1 SAE 5W-30 Advanced Full Synthetic Motor Oil.
How many miles can you put on Ford Fusion oil?
Use Flexible (max) 10,000 miles/ 12 months Best oil for Ford Fusion Video David Muench (Carnes Mechanical), Hey, I’m David. I’ve worked in a car store for 6 years.
What is the best oil type for Ford Fusion in 2015? Ford Fusion?
The most recommended oil type for a Ford Fusion in 2015 is 5W-20. Ford Fusion is 5W-20 oil.