2010 Silverado 1500 Oil Type, Capacity, Filter & Change Cost

2010 Silverado 1500 Oil Type: Are you looking for the correct oil type capacity, filter size, and replacement cost in 2010 for the Silverado 1500? We’ve got you covered! This article will provide the details that you require to ensure your truck runs effortlessly.

Oil Type: The oil recommended for the silverado in the year 2010 Silverado 1500 is a 5W-30 synthetic oil. You can also make use of a conventional 10W-30 oil in the event that it is needed. Check your owner’s manual to find the particular oil type recommended for your vehicle.

Capacity for Oil: The capacity of oil for the 2010 Silverado 1500 is different based on the size of the engine. However, generally speaking, the majority of Silverado 1500 models have an oil capacity of 6 quarts. Check your owner’s manual to find out the exact capacity of oil for your truck.

Oil Filter: The most recommended oil filter for 2010. Silverado 1500 is a Purolator PL14610 or an ACDelco PF2232. Make sure to buy the appropriate oil filter for your truck’s engine.

Cost of a Change in Oil: The price of the oil change in the 2010 Silverado 1500 is contingent upon the location where it is completed. But, you should expect to spend between $50 to $100 to have an oil replacement at a service or dealership center. It is also possible to alter the oil yourself in order to save the money.

2010 Silverado 1500 Oil Type

The recommended oil type for the Silverado 1500 for the 2010 Silverado 1500 is 5W-30. But, you may want to look into using synthetic oil particularly if you live in colder climates or utilize your vehicle for long durations. These oils tend to be resistant against wear and extreme temperatures.

Here are a few samples of 5W-30 synthetic oil that are compatible with Silverado 1500 in 2010. Silverado 1500:

• ACDelco’s Dexos1 Synthetic Motor Oil 5W-30
• Mobil 1 Synthetic Advanced Motor Oil for Fuel Economy 5W-30
• Castrol The Advance Synthetic Full Synthetic Synthetic Engine Oil 5W-30
• Pennzoil Pure Synthetic, High Mileage Engine Oil 5W-30
• Valvoline Advanced Full Synthetic Engine Oil 5W-30

2010 Silverado 1500 Oil Capacity

The capacity of the oil in 2010. The Chevrolet Silverado 1500 varies depending on the size of the engine. In general, the majority of Silverado 1500 models have an oil capacity of 6 quarts.

Here’s a table of the capacity of oils for several typical 2010 Silverado 1500 models:

It is crucial to remember that these capacities are only estimations. The actual capacity of the oil in your 2010 Silverado 1500 might differ depending on the specific year and model. It is recommended to refer to the owner’s manual of your vehicle for the exact capacity of the oil in your car.

2010 Silverado 1500 Oil Filter

The best oil filter that is suitable for Silverado 1500 for the 2010 Silverado 1500 is the ACDelco PF48E. There are however other high-quality oil filters available for purchase.

You should select a filter that’s compatible with the kind of engine you are using and the weight of the oil.

Here are some other famous oil filters that functioned in conjunction with Silverado 1500 in 2010. Silverado 1500:

• Mobil 1 M1-108A
• Fram PH8226
• K&N HP-1017
• Bosch 3317
• Purolator L10021

2010 Silverado 1500 Oil Change

In order to change oil for the Silverado 1500 from 2010, you will need the following tools: Silverado 1500, you will require the following tools and equipment:

• New oil filter
• Oil drain pan
• A socket or wrench is needed to get rid of the oil drain plug
• Funnel
• New engine oil

Steps:

1. The truck should be placed on a level surface.
2. Stop the engine and allow it to run for a minimum of 15 minutes.
3. Unscrew the hood, then look for the cap that’s filled up with the oil. Unclip the cap.
4. The drain pan should be placed under the plug that drains the oil.
5. Make use of a socket or wrench to remove your draining plug.
6. The old oil should drain into the pan for draining.
7. Once the old oil is drained as well as the draining plug replaced, you can install the plug and tighten the bolt with the wrench or socket.
8. Clean your old filter.
9. Apply thin layers of engine oil that are fresh on the gasket of the fresh oil filter.
10. Set up the brand-new oil filter on the block by hand until it’s secured.
11. Remove the funnel from its neck on the filler for oil and then pour fresh motor oil to it.
12. Removing the cap that is holding the oil.
13. Start the engine and then let it run for several minutes.
14. Verify the concentration of oil and add more when needed.
15. Turn off the engine, then take out any old or damaged filter as well as oil in the correct method.

People Also Searches the 2010 Silverado 1500 oil type

Conclusion 

We appreciate you taking the time to go through this post about the year 2010. This is the 2010 Silverado 1500 type of oil! you have found it useful.

The routine changing of your oil is one of the most important actions you can do to ensure your car is operating at its best and prolong its lifespan. Following the guidelines in this article, you’ll have the ability to choose the most suitable oil type and size to work for the Silverado 1500 and then change the oil at home, saving expense.

Should you experience any questions or need assistance with selecting the appropriate oil for your vehicle, you can contact us below or contact any local Chevrolet dealership.

FAQs – 2010 Silverado 1500 oil type