What type of hydraulic oil does a farmall super c take

Hydraulic oil for Farmall Super C. Thread starter B3B; Start date Apr 23, 2017 … Rockford, IL Tractor John Deere 314, Farmall A, B, C, M, F-20 I just bought a Super C Farmall. The manual says, “Refill the reservoir with the IH “Touch Control” fluid.” Since I don’t have an IH dealer close by, is there an equivalent hydraulic fluid that I can use in place of it? …

FAQ what type of hydraulic oil does a farmall super c take

What is a Farmall Super C Tractor?

Produced by International Harvester between 1951 and 1954, the Farmall Super C tractor was an upgrade to the previous Farmall C. The Super C model has a slightly larger engine, an increased compression ration and adjustable rear tires.

How many gallons are in a Farmall Super C fuel tank?

The Farmall Super C fuel tank holds 11 gallons. Required engine oil capacity is 5 quarts, with 15 quarts of coolant necessary for the radiator system. The tractor’s wheelbase is 82.25 inches with a length of 123 inches. Vehicle height is 74.75 inches with a width of 81 inches. The Super C has a minimum turning radius of 15 feet.

How many gallons of oil does a Farmall tractor hold?

Top forward speed is 10.3 m.p.h. in fourth gear, with reverse moving the tractor at 3 m.p.h. The Farmall Super C fuel tank holds 11 gallons. Required engine oil capacity is 5 quarts, with 15 quarts of coolant necessary for the radiator system.

What is the compression ratio of a Farmall Super C engine?

The C123 is rated at 1,400 revolutions per minute (RPM) and is designed with a liquid cooling system using water. Compression ratio for this engine is rated as 6:1. The air intake design for the Farmall Super C is naturally aspirated. Farmall Super C transmissions consist of a rear-wheel-drive sliding-gear design.

See also  2015 chevrolet malibu oil type [Update 2023]