2008 Chevy Silverado Oil Type, Capacity, Filter & Change Cost

ADVERTISEMENTS

2008 Chevy Silverado Oil Type: Inspecting and maintaining the 2008 Chevy Silverado’s engine’s health is essential to ensure maximum performance and long-term durability. 

This article will explore the most important aspects of maintaining your oil giving you the information needed to keep the engine of your truck functioning effortlessly.

ADVERTISEMENTS

Oil Type: For the 2008 Chevy Silverado The recommended type of oil is 5W-30 full synthetic motor oil. This oil is high-performance and is created to provide the highest level of protection to your engine, particularly in extreme temperatures.

Capacity Of Oil: In 2008, the Chevy Silverado’s engine is equipped with an engine capacity of 5.5 quarters of oil. It’s crucial to make use of the right amount of oil to guarantee adequate lubrication and security.

ADVERTISEMENTS

Oil Filter: This 2008 Chevy Silverado is equipped with the ACDelco PF48 oil filter. This filter is of high quality and effectively catches debris and dirt out of your engine oil, ensuring that your engine stays in good condition and runs smoothly.

Cost of Oil Change: The price of an oil replacement for the 2008 Chevy Silverado is contingent on the kind of oil you choose to use and if you decide to do it yourself or hire a professional. 

If you opt to perform the task yourself, it is possible that you can anticipate paying about $20-30 for the filter and oil. If you would prefer a professional service costs will likely be between $50 to $70.

2008 Chevy Silverado Oil Type

2008 Chevy Silverado Oil Type

The type of oil recommended for the 2008 Chevy Silverado will depend on the engine Type of the vehicle. These are some of the more Commonly used choices:

  1. 4.3L V6 Engine The Recommended Oil type is 5W-30.
  2. 4.8L V8 Engine The Recommended Oil type is 5W-30.
  3. 5.3L V8 Engine The recommended type of oil is 5W-30.
  4. 6.0L V8 Engine The Recommended oil type is 5W-30.
  5. 6.2L V8 Engine The Recommended type of oil is 5W-30.

It is always recommended to refer to your car’s owner’s manual to get the most current and accurate details on Specifications for oil. You can also examine the cap on your oil or dipstick to see any specific oil specifications provided by your Manufacturer.

2008 Chevy Silverado Oil Capacity

The capacity of the oil in a 2008 Chevy Silverado is dependent on the particular engine as well as other variables. Here are approximate oil capacities for several popular engine choices:

  1. 4.3L V6 Engine: Its capacity of oil is approximately 4.5-5.0 Quarts (4.3-4.7 Liters).
  2. 4.8L V8 engine: Its capacity of oil is about 6.0 Quarts (5.7 Liters).
  3. 5.3L V8 Engine: The capacity of the oil is approximately 6.0 Quarts (5.7 milliliters).
  4. 6.0L V8 Engine. The capacity of the oil is approximately 6.0-6.5 quarters (5.7-6.2 L).
  5. 6.2L V8 Engine: capacity of the oil is about 8.0 Quarts (7.6 Liters).

Note that these are estimates It is always advisable to check your vehicle’s owner’s manual for the exact oil capacity that is specific to the engine model you have.

2008 Chevy Silverado Oil Changes Intervals

A regular oil change is essential to maintain the condition of your vehicle. The oil is gradually dirty and contaminated by debris, dirt, and combustion byproducts that can alter the lubricating qualities of the oil. 

The recommended interval to change oil for the 2008 Chevy Silverado is usually every 5,000-7500 miles (or every six months) according to your driving habits and the conditions.

ADVERTISEMENTS

2008 Chevy Silverado Oil Change

  1. Place the truck on a level surface, And let the engine cool for a minimum of 30 minutes.
  2. Unscrew the hood And find the drain plug for oil. It is Typically on the side of the motor near to the rear.
  3. Place the drain pan for oil beneath the plug to drain oil.
  4. Make use of the socket wrench and a Ratchet to loosen the plug for draining oil.
  5. Once the drain plug is free, take care to take it off by hand.
  6. Let the old oil fully drain into the drain Pan for oil.
  7. After the old oil has been drained and the oil has been Removed, clean off the drain plug And the space around it using an abrasive clean.
  8. Install the new filter. Make sure you Tighten it by hand until it is secure.
  9. Replace the drain plug for oil and tighten it using the Socket wrench along with the ratchet.
  10. Take off the drain pan for oil.
  11. Lift the hood, And then locate the cap for filling up with oil.
  12. The cap for the oil filler must be Removed.
  13. With the funnel fill the funnel with the oil that you have just Added.
  14. Stop pouring when the oil level is above its “full” Level on your dipstick.
  15. Replace the cap on the oil filler.
  16. Get the motor started and allow it to run for a couple of minutes.
  17. Shut off the engine, and check the Level of oil. If needed, Add more oil.
  18. Remove the old filter And oil correctly.

People Also search for the type of oil for the 2008 Chevy Silverado

recommended oil for chevy silverado
the best oil for chevy silverado
2008 silverado 1500 oil capacity
2008 silverado differential fluid
2008 Chevy Silverado oil capacity
oil for silverado 1500 recommended
the best oil for Chevy trucks
oil for a 2008 Chevy Silverado

Conclusion

The right oil to use on your 2008. Chevy Silverado is vital to keeping the durability and performance of your car’s engine. 

Take into consideration your lifestyle, the climate as well as the manufacturer’s guidelines when choosing the correct quality and type of oil. 

Regular oil changes at the recommended intervals will ensure that your Silverado will run efficiently for many years to come.

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – type of oil for 2008 Chevy Silverado

What kind of oil do you put in a Chevy Silverado?

What is the correct engine oil for the Chevrolet Silverado? You need to use oil that is the recommended viscosity. This is the ‘thickness’ of the oil and is usually displayed prominently on the packaging.

How long does engine oil last on a Chevy Silverado?

Some engine oils are designed to be used for up to 5,000 miles, while some may last up to 10,000 or even 12,000 miles. Once again, it all depends on the specific motor oil you are using. Something you should know how to do, although it is not very hard, is how to change the oil on your Chevy Silverado.

How much oil does a 2022 Chevy Silverado take?

How Much Oil Does a Chevy Silverado Take? The 2022 6.2L Chevy Silverado takes 8 quarts (7.6 liters) of 0W-20 oil with a filter. Check the engine oil level on a regular basis, at least once every 650 kilometers (400 miles), especially before a lengthy journey.

How many quarts of oil does a 2013 Chevy Silverado take?

A 1999 – 2013 Chevy Silverado 1500 with a 5.3L engine consumes 6 quarts of oil . Unlike the 1999 – 2013 models, the newer Chevy Silverado models built in 2014 have an oil capacity of 8 quarts. Your 2000 Chevy Silverado can take a maximum of 6 quarts of oil, SAE 0W-20 or 0W-30.

ADVERTISEMENTS