Troy Bilt Mower Oil Type, Capacity, Filter & Change Cost

Troy Bilt Mower Oil Type: The maintenance of your Troy-Bilt mower smoothly and effectively requires regular maintenance, which includes oil changes. Here’s a complete guide on Troy-Bilt mower’s oil type capacity, capacity, filters, and cost for changing to keep your lawnmowers in top form.

Oil Type: Troy-Bilt mowers generally employ SAE 30 and 10W-30 motor oils. In colder climates, synthetic oil is advised for greater performance in lower temperatures.

Capacity Of Oil: The capacity of the oil can vary based on the model and the type of Troy-Bilt models can hold 1.5 to 2 1 quarts of oil. Consult the operator’s guide for the exact capacity of your oil.

Oil Filter: Troy-Bilt mowers utilize a variety of oil filters. Therefore, it’s essential to look through your owner’s manual to determine the specific type of filter that is appropriate for your model. The most common Troy-Bilt mower oil filters include 751-12690, 753-02071, as well as 753-02070.

Oil Change Cost: The price associated with an oil replacement for the Troy-Bilt lawnmower typically ranges between $20 and $50. This includes filter, oil, and labor if you hire an expert.

Troy Bilt Mower Oil

Troy Bilt Mower Oil Type

Based on the results of a search Here are a few options regarding the type of oil you can apply to the Troy Bilt mower:

  1. SAE 10W-30 Motor oil: is the most commonly used engine oil used by Troy Bilt lawnmowers. It is an oil with multiple grades that performs well in hot and cold conditions. The term 10W-30 means it has a viscosity of 10 in the cold climate and may be as high as 30 in hot environments.
  2. SAE 5W-30 Motor oil: This kind of engine oil is suitable for use on most Troy Bilt lawnmowers and can be used in a variety of temperatures. It is an oil made of synthetic material that can perform well in temperatures that range from -40degF up to 120degF.
  3. SAE30 motor oil: This kind of oil is suggested to be used on Troy Bilt mowers in areas that have temperatures that range from 40degF up to 100degF.

It is vital to know that the type of oil you choose suitable for the model of your Troy Bilt mower will depend on the model and specifications of your engine. 

It is suggested to consult the owner’s manual or speak with a Troy Bilt dealer to ensure that you choose the right oil type for your particular mower model.

Troy Bilt mower oil capacity

The capacity of the oil in a Troy-Bilt lawnmower generally ranges from 1.5 2-quarts (47-64 fl 8 oz). However, the exact capacity can differ based on the particular model of the mower. 

Always consult the manual for your mower’s owner to determine the precise capacity of the oil for your mower.

This table summarizes the oil capacities of a number of popular Troy-Bilt mower models:

ModelOil Capacity (qts)Capacity for Oil (fl OZ)
TB3001.547
TB3201.547
TB 4001.7557
TB 500264

Troy Bilt Mower Oil Capacity

 

Troy Bilt Mower Oil Filter

Model NumberCompatible EnginesRetailer
951-12690Craftsman PowerMore The Troy-Bilt and Cub Cadet 382cc, 439 Cc, 420cc 547cc, 452cc and 679ccTroy-Bilt and Cub Cadet
OE 492932S, BS-492932S, 5049K Kohler KH-12-050-01-STroy-Bilt riding mowers that have Briggs as well as Stratton enginesThe Home Depot
751-11501, 951-12690MTD, Cub Cadet, and Troy-Bilt enginesAmazon
Briggs & Stratton Intek and Vanguard OHV engines that have oil filters that start with 492932S and BS-492932S and 5049HTroy-Bilt lawn tractors and zero-turn mowersDo it Best
OE 951-12690, 751-1290, and 751-11501Troy-Bilt OHV engine sizes range from 382cc up to 679ccThe Home Depot
 

Troy-bilt lawn mower oil changes

In order to change the oil on your Troy-Bilt lawnmowers take these steps:

  1. The engine should be running for a couple of minutes to warm the oil, which makes it easy to remove.
  2. Shut off the engine, and remove that spark plug cable to avoid accidental ignition.
  3. Install a drain pan underneath the drain plug that drains oil at the lower part of your engine.
  4. Take out the drain plug then let old oil run off into the pan.
  5. After the oil has gone completely, you can replace the drain plug and secure it tightly.
  6. Take off the cap on the oil filler and then add the amount of oil recommended (usually around 20 pounds which is 0.59 milliliters).
  7. Replace the cap on the oil filler and clean up any drips or spills.
  8. Connect the spark plug and begin the engine. Let the engine run for a short period of time to let the oil circulate.

It is essential to dispose of old oil in a safe manner since it could be damaging to the earth. Contact any local recycling center, or auto parts shop to find out if they provide recycling services for oil.

Purchase the right oil for your engine at https://engineoiil-capacity.com/  

People Also Searches troy bilt mower oil type

troy bilt 3550 generator oil
troy bilt push mower oil type
troy bilt mower oil change
troy bilt push mower oil
troy bilt pony oil type
troy bilt lawn mower oil
troy bilt oil specs
troy bilt engine oil

Conclusion:

Using the right oil for your Troy Bilt mower is crucial for maintaining optimal performance and longevity.

Stick to the recommended oil types based on the temperature conditions you’ll be using your mower in, and change the oil regularly.

By following these guidelines, you’ll ensure your Troy Bilt mower runs smoothly and efficiently for years to come.

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – Troy Bilt Mower Oil Type

What grade oil does Kohler use in Troy Bilt?

For Kohler Courage® and Kohler Command®, Honda®, and engines identified solely as Cub Cadet®, Troy-Bilt® or Powermore®, use the oil grades below. • Summer – 10W30 (0? to 100?F.) • Winter – 5W30 (-22? to 50?F.)

Can I put a mulch kit on my Troy-Bilt riding mower?

Using your riding lawn mower and a mulch kit can increase the nutrients that are deposited on your lawn. Follow these simple steps to install a mulch kit on your Troy-Bilt riding lawn mower

What kind of oil is best for my lawnmower?

If your Lawn Mower comprises of ‘Briggs and Stratton Engines,’ then first acknowledge the nature of temperature. If the temperature is cold and it ranges from 0-40 degrees, then I would recommend you switch to SAE-5W-30 asap if you are utilizing some other oil. However, if you are living in a warm temperature, then better utilize SAE-30.

Can I change the oil in my Briggs and Stratton lawn mower?

One of the essential contemplation that every Lawn Mower goes through is its Maintenance and the Oil type utilized in that particular Mower.If you use Lawn Mower, then you might be aware of this struggle. Before you can change the oil on your Briggs and Stratton, little motor, it’s critical to comprehend the oil type and limit required.