Pulsar 220 Engine Oil Capacity, Type Filter & Change Cost

Pulsar 220 Engine Oil Capacity: Inspecting and maintaining the condition of your Bajaj Pulsar 220 is crucial to ensure optimal performance And long-lasting use. 

One of the most important factors to keep in mind is to use the correct motor oil And replace it regularly at regular intervals. 

This guide contains all the necessary information regarding Pulsar 220 motor oil which includes its capacities, type, recommendations, And the estimated price for changing.

Engine Oil Capacity: The engine oil capacity of the Pulsar 220 is 1.45 Liters. In the event of an oil change, only 1.2 Milliliters must be filled. This is because there is still oil in the engine, even after the draining.

Engine Oil Type: The recommended engine oil to use with the Pulsar 220 engine is 20W-50. This multigrade oil is a good choice for protection And lubrication across all Temperatures. You can look into making use of 10W-40 oil to ensure a better cold start in cooler Temperatures.

Oil Filter: The Pulsar 220 is a spin-on type of engine oil filter. The most recommended code for the filter should be Bajaj D111203. It is always recommended to use an authentic Bajaj filter or an aftermarket brand that is known for its Quality.

bajaj pulsar 220 oil capacity

Bajaj Pulsar 220 Oil Capacity

The capacity of the engine oil in the Bajaj Pulsar 220 is an important aspect to consider to make sure that the vehicle is maintained properly. Here are some important points to consider regarding how much Bajaj Pulsar 220 engine oil capacity:

FeatureDescription
Total Oil Capacity1.45 liters
Required Oil for Change1.2 liters
Unit of Measurementliters

Bajaj Pulsar 220 Oil Type

The recommended oil for the engine of Bajaj Pulsar 220 is a 20W-50 synthetic or mineral oil. It’s multi-grade which means it can be used in hot and cold temperatures. Additionally, it has good resistance to oxidation and wear protection characteristics.

It is possible to use any type of 20W-50 oil, however, it is recommended to choose the highest quality oil from a trusted brand. The most popular brands of 20W-50 oil suitable for Bajaj Pulsar 220 include:

  • Castrol Power1 Cruise 20W-50
  • Motul 5100 20W-50
  • Liqui Moly Top Tec 4T 20W-50
  • Shell Advance Ultra 20W-50
  • Bajaj DTS-i 20W-50

The capacity of oil in the Bajaj Pulsar 220 is 1.2 milliliters. It is recommended to change the oil each 3000 miles or 2 months, depending on what is first. It is also recommended to change the filter on your oil every time you change the oil.

bajaj pulsar 220 oil Type

Bajaj pulsar 220 oil change interval

The recommended interval for oil changes to the Bajaj Pulsar 220 is 3000-4000 kilometers or six months, whichever occurs first. regular oil change intervals are crucial to maintain the durability and efficiency of the engine.

It is also crucial to choose the recommended type of engine oil that is suitable for Pulsar 220 which is 20W-50. 

The most popular options for engine oil to use with the Pulsar 220 are Castrol POWER1 Cruise 20W-50 4-T Synthetic Oil on Bikes, and the Motul 7100 fully synthetic engine oil. 

If you’re unsure about changing your oil yourself, consult the owner’s manual or seek guidance from a skilled mechanic.

Bajaj pulsar 220 oil filter

The Bajaj Pulsar 220F is a cartridge-type oil filter. It’s an oval filter with an aluminum case and a paper element. The paper element is used to trap contaminants and dirt from the engine oil to keep the engine clean and safe.

The most recommended oil filter to use with the Bajaj Pulsar 220F is the Bajaj Genuine Oil Filter. It can be purchased from the majority of Bajaj dealers and online retailers. Other high-quality oil filters that work with the Pulsar 220F include:

BrandTypeVehicle ModelPrice (INR)Where to Buy
Bajaj GenuineSpin-onPulsar 220 DTS-iVariesAuthorized Bajaj Dealers, online retailers like Amazon and Flipkart
SunmaxInlinePulsar 220 DTS-i200 – 300Online retailers like Flipkart and Snapdeal, local spare parts shops
HiFlo FiltroSpin-onPulsar 220 DTS-i300 – 400Online retailers like Amazon and eBay, local spare parts shops
K&NSpin-onPulsar 220 DTS-i500 – 700Online retailers like Amazon and eBay, authorized K&N dealers
RyderSpin-onPulsar 220 DTS-i300 – 400Online retailers like Flipkart and Snapdeal, local spare parts shops

bajaj pulsar 220 oil Filter

Conclusion

Being aware of the potential for the motor oil in the Bajaj Pulsar 220 is crucial to keep it in good condition and ensure its performance at the highest level.

The Pulsar 220 requires 20W50 engine oil. You should change your oil every 3000km or six months.

Regularly checking the levels of oil and following the instructions of the manufacturer regarding oil changes will ensure that the engine runs at a high efficiency.

For any concerns or questions about the oil level in your vehicle or the care of the Pulsar 220 model, consult an automotive expert with certification in the field.

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – bajaj pulsar 220 oil capacity

How often do I need to replace the engine fluid in my Bajaj Pulsar 220?

The recommended oil-change time for Bajaj Pulsar 220 should be every 3000-4000 kilometers or once every 6 months, depending on what comes first.

Which is the best type of engine oil as well as the grade of Bajaj Pulsar 220?

The recommended grade and oil type that is recommended for Bajaj Pulsar 220 is 20W-50.

What amount of engine oil will this Bajaj Pulsar 220 require?

The Bajaj Pulsar 220 requires 1.2 milliliters of oil for the engine.

Can I use the engine oil from a car within my Bajaj Pulsar 220?

It isn’t recommended to use engine oil from a car on a motorcycle as car engine oils are not specifically designed for dry clutches. It is essential to choose engine oil specifically created for motorcycles.

How can I determine the oil level within the engine of my Bajaj Pulsar 220?

To determine the level of engine oil within the Bajaj Pulsar 220, first begin to warm your engine, by running for a few minutes. After that, shut off the engine, and wait several minutes before the oil starts to be able to settle. The dipstick is used to determine the level of oil. The level of the oil must be within the marks of minimum and maximum that appear on the dipstick.