Oil Type 2014 Honda Accord [Update 2023] ❤️

Honda recommends using premium-grade 0w-20 detergent oil for the 2014 Honda Accord. The service manual also states that synthetic oil can be used as well as long as it includes the API certification and the specified viscosity grade.

One thing to remember though is You cannot mix them and the engine should be drained before using a different type of oil. …

Introduction

A single of the essential actions you can take to ensure the 2013 Honda Accord runs smoothly is to choose the appropriate kind of oil. 

Lubricating the engine with oil helps keep the moving parts from getting too worn down. Using the wrong oil in your car can result in expensive repairs down the road.

Honda Accord 2014 oil Type 

The oil of choice for 2014. Honda Accord is a synthetic blend or full synthetic motor oil 0W-20. It is crucial to choose an oil of high quality that meets the standards set by Honda to ensure the best performance and protection of the engine. 

It is also suggested to follow the guidelines of the manufacturer regarding oil maintenance and changes to prolong the life of the engine.

Honda Accord 2014 oil capacity

The capacity of the oil in the 2013 Honda Accord will depend on the engine model. For the four-cylinder engine, the capacity for oil is about 4.4 4 quarts (4.2 liters) with a filter replacement. 

In the V6 engine, the oil capacity is 4.9 Quarts (4.6 liters) after changing the filter. It is essential not to overfill the engine since it can result in damage to your engine.

Oil filter for the Honda Accord 2014

The oil filter was in 2014. Honda Accord will depend on the type of engine. For a 4-cylinder engine, the recommended oil filter is OEM Honda OEM filter component number 15400PLM-A02. 

In the case of the engine with a V6, the suggested oil filter is Honda OEM filter model number 15400PLM-A01. 

It is essential to use a genuine Honda oil filter. Or premium aftermarket filter that is of high quality and meets or exceeds the specifications of the manufacturer to ensure optimal engine performance and safety.

Important to Use the Right Oil

The right kind of oil is vital for the proper functioning that your motor. Honda suggests the owners of Honda Accords 2014 Honda Accords use a specific type of oil for optimal engine performance and durability.

Recommended Type of Oil Type in 2014 Honda Accord

The oil recommended for the 2013 Honda Accord is 0W-20 synthetic oil. This kind of oil was specifically created to meet the needs of Honda engines and offers superior lubrication, wear prevention as well as fuel efficiency.

Synthetic vs. Conventional Oil

There are two primary kinds of motor oils both conventional and synthetic. Synthetic oil is engineered chemically to give superior performance and protection over conventional oil. 

It lasts longer as well and is more suitable for extreme temperatures. Although synthetic oil is higher priced than traditional oils it can extend the lifespan of your engine, and also reduce your expenses in the long term.

See also  2009 honda accord oil type

Synthetic Blend Oil 

The name itself suggests that it is actually a blend of synthetic and conventional oils. It provides certain advantages over synthetic oils, such as enhanced performance and longer-lasting security but is also inexpensive.

If you’re seeking an affordable balance between price and high-quality synthetic blend oil might be an ideal choice in 2014’s Honda Accord.

The Best Oil to Choose for the 2014 Honda Accord

Once you’ve mastered the different kinds of oils that are available for the Honda Accord in 2014, Honda Accord let’s discuss which one is the best for your vehicle. The kind of oil you pick will be based on a variety of variables, including:

  • The time of your car’s age
  • The miles you have traveled on your engine
  • Your driving habits
  • The climate in which you live

When the 2014 Honda Accord is still relatively new and doesn’t have lots of miles then you can go with conventional oil.

High-mileage oil is recommended for cars over 75,000 miles. The synthetic blend is an excellent alternative for people who want the advantages of synthetic oil but at an affordable price.

If you reside in an area that experiences extreme temperatures, or you frequently move through stop-and-go traffic, synthetic oil could be the most suitable option. 

Synthetic oil is superior in enduring high temperatures and may help improve the efficiency of your fuel.

2014 honda accord oil change

To conduct the oil change in 2014. Honda Accord, follow these steps:

  1. Check that the engine is running cool and parked on a level surface.
  2. The cap that fills the oil that is located at the top of your engine.
  3. Find the drain plug for oil in the lower part of the engine. Then, place the oil drain pan under it.
  4. Remove the drain plug using a wrench, and allow that old oil completely drain.
  5. When the old oil has been drained and the drain plug is replaced, you can replace it and tighten it up to the torque you have specified.
  6. Find the oil filter on the engine. Use an oil wrench to get rid of the filter.
  7. Cover the gasket of the new filter by cleaning it with oil, then place the brand-new filter manually and tighten it up to the torque specified.
  8. Fill the engine up with the appropriate quantity and kind of oil, usually 4.4 quarters for a 4-cylinder engine and 4.9 Quarts for V6 engines.
  9. Replace the cap that fills the oil and then start the engine and let it run for a couple of minutes to let the new oil circulate.
  10. Shut off the engine and test the level of oil using the dipstick. Add oil if required.

It is essential to correctly remove the old oil and filter in a recycling center or at an auto parts store. It is also advised to follow the guidelines of the manufacturer regarding oil maintenance and changes to prolong the life that the engine.

See also  2014 ram 2500 5.7 oil type

How to change the oil and filter on a 2014 Honda Accord

DIY: How to Change Oil on a 2014 Honda Accord Sport

People Also Searches oil type 2014 honda accord

2014 honda accord recommended oil
2014 honda accord oil requirements
2014 honda accord oil spec
recommended oil for the honda accord
2014 accord 2.4 oil capacity
2014 honda accord engine oil
2017 honda accord recommended oil
2014 honda accord oil capacity

Conclusion

It is essential to select the correct oil to match your 2014. Honda Accord is important for engine performance and longevity for a long time. 

If you adhere to the guidelines in this article, and talk to your mechanic or auto dealership if you require be sure that you’re using the right oil for your vehicle.

Purchase the right oil for your engine at https://engineoiil-capacity.com/  

FAQ oil type 2014 honda accord

How much oil does the 2014 Honda Accord take?

Its 2014 Honda Accord’s 2.4L and 3.5L engine oil capacities are 4.2L in addition to 4.5L Quarts. The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.

What kind of oil does a 2002 Honda Accord take?

Most Honda Accords with the four-cylinder take the recommended 5W-20 oil. It can be a synthetic blend or a full synthetic. The V6 engine also takes the same, for instance, the 2002 Honda Accord V6 oil type is 5W-20 synthetic, and the capacity is 4.6 quarts.

What is the best oil for a high-mileage Honda Accord?

Although you can continue to use conventional oil in Honda Accords that have over 100,000 miles, the best oil for high-mileage Honda Accord is a full synthetic or at least a synthetic blend. Most manufacturers say you can switch from conventional to synthetic without any problems. Then again, it’s your discretion at the end of the day.

How many generations of Honda Accord engine oil are there?

We analyzed official data on Honda Accord engine oil for 11 generations and 58 modifications produced from 1984 to 2022 and figured out the optimal liquids. 4th Gen 4Runner With TRD Wheels.

What kind of oil type should I put in the 2014 Honda Accord?

The best oil type for 2014. Honda Accord is a synthetic blend or full synthetic motor oil 0W-20.

How often do I need to replace the oil on the 2014 Honda Accord?

Honda recommends changing the oil in 2014. Accord at least every 7500 miles, or for 12 months, or when it is the first.

What if I used another type of oil on the 2014 Honda Accord than what is suggested? 

It is suggested to use the type of oil suggested by the manufacturer to achieve maximum engine performance and safety.

What kind of filter should I choose in the 2014 Honda Accord?

A recommended oil filter that is suitable for 2014. Honda Accord will depend on the type of engine. For the four-cylinder engine, the suggested oil filter is one from Honda OEM filter model number 15400PLM-A02. If you have a V6 engine the suggested oil filter is the Honda OEM filter model number 15400PLM-A01.

Can I change the oil filter, without changing the oil?

It is advised to replace the oil, as well as filter simultaneously to ensure the best performance of your engine and for protection.
 

How do I test the oil level on the 2014 Honda Accord?

 The dipstick that is located on the engine’s dashboard to measure the level of oil. Check that the engine is at a cool temperature and is parked on the level ground prior to conducting the check of the oil.
 

What can I do to reset the indicator for oil changes for the 2014 Honda Accord?

Follow the steps in the owner’s manual for how to reset the indicator for oil change for 2014. Honda Accord.

Do I have the option of switching the conventional oil I use to synthetic within the 2014 Honda Accord?

 Yes, you are able to change between conventional and synthetic within the 2014 Honda Accord. But, it is advised to follow the guidelines of the manufacturer regarding oil maintenance and changes.
 

Do I have the ability to alter the oil of the 2014 Honda Accord myself?

Yes, you can replace the oil on the 2014 Honda Accord yourself. Be sure you follow the correct procedure and utilize the recommended type of oil and filter to maximize engine performance and safety.