Kawasaki FX801V Oil Type: Maintaining the Kawasaki FX801V lawnmowers is vital to ensure optimal performance and durability.
Making sure you use the right type of oil And filter is essential for safeguarding your engine And providing long-lasting service.
This complete guide will give you all the necessary Information to make an informed decision about the timing of your Kawasaki FX801V engine oil replacement.
Oil Type and Capacity: The oil Recommended for the Kawasaki FX801V engine is a premium Synthetic oil with 10W-40. This oil type is specifically designed to offer superior protection to air-cooled engines, such as the FX801V. The Capacity of oil to be used for FX801V is 2.2 Quarts (2.1 Liters).
Oil Filter Replacement: It is crucial to change the oil Filter after every oil change. The most recommended oil filter to use with the FX801V filter is Kawasaki 49065-7010 oil filter. It is made to block harmful Pollutants And shield your engine from harm.
Oil Change Cost: The Cost for an oil Change on the Kawasaki FX801V can vary based on the Location as well as the kind of filter And oil you select to make use of. You can anticipate to spend between $30 to $50 for an expert oil change.
Kawasaki fx801v oil Capacity
The capacity of oil of the Kawasaki FX801V engine is about 2.2 milliliters or 2.3 Quarts. It is essential to consult the user’s manual or talk to the manufacturer for the exact capacity of the oil and any other specific instructions for your specific type of machine.
Recommended Kawasaki fx801v Oil Type
It’s crucial to choose an oil that complies with the manufacturer’s requirements when selecting the best oil for your Kawasaki fx801v engine.
It is advised to use 4-stroke SAE 10W-30 oil with an API rating of SF, SG, SH, SJ, or SL in Kawasaki fx801v engines. Here are a few illustrations of oils that fit these requirements: 4-Stroke Kawasaki Engine Oil
- Kawasaki 4-Stroke Engine Oil
- Mobil 1 Racing 4T 10W-40 Motorcycle Oil
- Castrol Power 1 4T 10W-40 Motorcycle Oil
It is crucial to remember that using oil that does not adhere to these requirements can harm your engine and void your warranty.
Kawasaki fx801v oil Filter
This Kawasaki FX801V engine is typically equipped with filters from the Kawasaki OEM oil filter component number 49065-7007.
It is suggested to utilize authentic Kawasaki filters or oil filters that exceed the specifications of the manufacturer.
Proper maintenance and frequent replacement of the oil filter are crucial to ensure maximum engine performance and durability.
It is recommended to read the user’s manual or consult a Kawasaki dealer to find out the exact specifications for the oil filter of the FX801V model.
How Often Should You Change the Kawasaki fx801v Oil?
To ensure that your Kawasaki fx801v engine operates smoothly It is essential to change your oil regularly.
The recommended interval for oil changes for the Kawasaki fx801v engine should be every 50 hours or every year, whichever occurs first.
How to Change the Kawasaki fx801v Oil
The process of changing the oil in the Kawasaki FX801v engine can be an easy process that can be accomplished at home using a couple of basic tools.
- Steps are: Start the engine for a few minutes to heat the oil.
- Remove the old oil: by locating the drain plug, and then removing it to empty the old oil. Be sure to use a container or pan that can hold the oil.
- Change the filter on your oil: Take off the old filter and substitute it for a fresh one.
- Refill the oil with fresh: The recommended quantity of fresh oil to the engine. Be cautious not to fill it too much.
- Verify the level of oil: Utilize the dipstick to determine the level of oil and add more, if needed.
- The engine on: Start the engine for two minutes to circulate the oil.
|4-stroke, OHV, V-twin 90°
|852 cm 3 (51.99 cu-in)
|27.1 PS (19.9 KW; 26.6 HP) at 3,600 rpm
25.8 PS (19.0 KW; 25.5 HP) at 3,600 rpm
|Max. torque (crank PTO)
|63.0 Nm (6.4 kg·m; 46.5 ft·lb) at 2,400 rpm
60.5 Nm (6.2 kg·m; 44.6 ft·lb) at 2,400 rpm
|Twin barrel, internally vented carburetor
|Electronic spark ignition
|High-performance lubrication system
|Heavy duty shift-type starter
|13A or 20A charge coil (option)
|Unleaded gasoline (octane number 91 or higher)
|Pressurized forced circulation type
People Also search Kawasaki fx801v oil type
|kawasaki fx801v problems
|kawasaki fx801v oil change
|kawasaki fx801v horsepower
|kawasaki fx801v engine oil
|kawasaki fx801v specs
|801v kawasaki motor
|fx801v engine oil
|fx801v oil capacity
The right type of oil to use on the Kawasaki fx801v engine is crucial to ensure maximum performance and long-lasting.
It is recommended to utilize SAE 10W-30, 4-stroke oil that has the API ratings of SF, SG, SH, SJ, or even SL, and replace the oil every 50 hours or once a year or whichever is first.
Following these recommendations and you can ensure that your Kawasaki FX801v engine in good condition for many years to be.
For more posts visit our website: https://engineoiil-capacity.com/
FAQs – kawasaki fx801v oil type
What kind of engine does a Kawasaki fx801v have?
The Kawasaki FX801V is a 0.85 l (852 cc, 51.99 cu-in) V-twin 90° air-cooled 4-stroke internal combustion small gasoline engine with vertical shaft, manufactured by Kawasaki Heavy Industries Ltd. for general-purpose applications, commercial mowers, heavy-duty industrial and construction equipment.
What type of oil is for Kawasaki fr730v?
Kawasaki’s oil recombinations are based on using conventional oils, but their only recommendation is using an API SF, SG, SH, Sj, or SL. Since those are all older ratings, you can use the latest API SN, since it is backward compatible. I have a Kawasaki FR730V and saw the oil recommendations are identical.
What oil do you use in your Kawasaki?
ANS. I’d just use the Kawasaki label 10w-40 Syn Blend w/ Zinc. It’s priced pretty reasonably for the quality of the oil. For extreme hot weather, they recommend the 20w-50 or the new Full Synthetic 15w-50.
How important is the zinc in Kawasaki engine oil?
Zinc is important. RI Chevy, ZHY57, Marshy, and 2 others like this. Kawasaki recommends their 10 w 40 and 20 w 50 for very hot conditions, they also will not warranty any other oil. I just went to their school last month, So I do know what I am talking about.
What kind or oil type should I choose for my Kawasaki FX801V motor?
Kawasaki suggests the use of SAE 10W-30 engine oils for the FX801V engine for the most common operating conditions.