Ariens Zero Turn Mower Oil Type, Capacity, Filter, & Change Cost

Ariens Zero Turn Mower Oil Type: For the durability of your Ariens ZERO-TURN LAWN MOWER, it is vital that you maintain its condition.

You can expect me to be able and willing to answer your questions on the Ariens zero-turning mower, its oil capacity, filters, and costs. You will get some ideas on how you can change your oil at home.

Oil Type: Ariens zero-turning lawnmowers should be used with 10W-30 or synthetic oils. For those in colder climates, 5W-30 synthetic oil or 5W-40 can be used. Synthetic engine oil is safer and could help you prolong your engine’s life.

Maximum capacity: Ariens zero-turn mowers vary in their oil capacity. Most models can manage oil capacities of 1.5 to 2 quarts. The owner’s manual will tell you the exact capacity of oil for your particular model.

Ariens OEM Filter: this is the recommended oil filter to use with zero-turn Ariens tractors. You can also choose to use a premium aftermarket oil filter.

Change cost: A price for an Ariens Zero-Turn Mower oil change may vary depending upon the location. If you go to a service shop or dealer, expect to spend $50 to $70 on an oil replacement. You could save some money by changing your own oil.

Ariens zero turn mower oil type

Oil with SAE 30 viscosity is the recommended type of oil for Ariens zero-turn mowers. This oil type provides excellent protection from wear in various weather conditions.

Ariens offers some specific recommendations for oil:

• Ariens Synthetic Blend Engine Oil 5W-30
• Gravely SAE 30, Synthetic Blend Lawn Mower oil
• Ariens SAE 30-cycle engine oil

Check your Ariens zero-turn mower’s owner manual to find out the recommended oil type and capacity for your model.

Ariens zero turns mower oil Capacity

The capacity of the oil in an Ariens zero-turn mower can depend on the specific model. In general, the capacity can vary from 1.5 up to two quarts. 

It is essential to consult the manual of the owner or contact Ariens customer service to find out the exact capacity of oil for the specific Zero Turn mower model.

Here is a table of the oil capacity for some popular Ariens zero-turn mower models:

Ariens zero turn mower oil Filter

The oil filter that is recommended to use with Ariens zero-turn mowers is an Ariens OEM filter. But, you could also make use of a premium aftermarket filter. Here are a few of the top Aftermarket filters for oil that work with Ariens zero-turn mowers:

• ACDelco PF1371
• Wix 57094
• Fram PH8772A
• Purolator PL10241
• Mobil 1 M1-104A

When selecting the right oil filter it’s essential to be sure it’s the correct size and type that is suitable for the engine you are using. 

Also, consult your owner’s manual to find the exact recommendations for an oil filter for your Ariens zero-turn mower.

Checking Oil Levels

The simple task of checking the oil level can extend the engine’s life. It is recommended that you check your oil levels at least every month, or just before a long trip.

Follow these steps to check your oil level.

1. You should park your car on an even surface.
2. Turn off the motor and let it cool down for several minutes.
3. Open the hood to find the oil dipstick. It’s usually a long thin rod with a handle that is yellow or orange.
4. Pull out the dipstick. Wipe it clean using a rag.
5. Replug the dipstick down all the way into the oil tube.
6. Recheck the oil level by pulling the dipstick out again. The oil should be in the range between the “full-” and “add-” marks on your dipstick.
7. Add oil if it is low by using the cap. Do not overfill the engine.
8. Replace the oil filler caps and the dipstick.

Ariens Zero Turn Mower Oil Changing  

It is important to change the oil in your Ariens Zero Turn Mower. This will keep it running efficiently and smoothly. Ariens recommends changing the oil in their zero-turn mowers every two years or after 250 hours, whichever is first.

Follow these steps to change the oil on your Ariens zero-turn mower:

1. Parking the mower on an even surface is important.
2. Allow the engine to cool down for 15 minutes after turning it off.
3. Locate the cap on the oil filler. Remove the cap.
4. Under the oil drain plug located at the bottom of your oil pan, place an oil drain pan.
5. To loosen the drain plug, use a socket or wrench. The oil is hot.
6. Drain the oil completely in the drain pan.
7. Replace the drain plug once the oil is drained and tighten it firmly.
8. Remove the old filter. The filter may contain hot oils.
9. Apply a thin layer of new oil on the gasket.
10. Hand-tighten the oil filter until it fits snugly. The filter should not be over-tightened.
11. Remove the funnel from the oil filler neck.
12. Fill the engine with new oil using the oil filler neck. Don’t overfill the engine.
13. Replace the oil filler caps.
14. Start the engine, and let it run a few moments.
15. Add more oil as necessary.
16. Close the hood and turn off the engine.

People Also Search Ariens zero turn mower oil type

Conclusion

You have read this article on Ariens zero turn mower oil type. This information is intended to help you maintain and repair your mower for many years.

To keep your mower engine healthy, it is essential to change the oil regularly.

Implementing the tips in this article will allow you to change your oil quickly at home, reducing maintenance costs.

Enjoy your day lawnmowing and other outdoor activities!

For more posts visit our website: https://engineoiil-capacity.com/

FAQs – Ariens zero turn mower oil type

Do Ariens lawn mowers use oil?

Ariens manufactures lawnmowers using engines produced for them by several different manufacturers. It is the engine manufacturer that recommends the oil used and the service interval, rather than Ariens. A well-maintained lawn mower will last for years. Briggs and Stratton is perhaps the most popular engine choice on Ariens mowers.

I have an Ariens Zoom zero turns; how do I change the oil?

how to perform an Ariens Zoom Zero Turn oil and filter change Clean the area around the oil fill/dipstick in step 1. Step 2: Take out the oil fill/dipstick and drain plug. 3: Permit the oil to completely drain. 4: Scrub the vicinity of the oil filter. Put a container underneath the oil filter in step 5…

What type of oil does a zero-turn mower require?

Use 5W-30 Synthetic Small-Engine oil in small engines such as (but not limited to) mowers (zero-turn or riding and stand-on), generators, power washers, and any other equipment that requires SAE 5W-30 motor oil such as those manufactured by Kubota, Kawasaki, Robin, Onan, Linamar, Craftsman, Honda, Briggs, Stratton, and Vanguard.