2016 Silverado Oil Type, Capacity, Filter & Change Cost


2016 Silverado Oil Type: Inspecting and maintaining your 2015 Chevrolet Silverado starts with proper maintenance of the engine and an essential element of that is using the correct oil and changing it often. 

However, with A variety of engine options, navigating the oil particulars can be A challenge. This complete guide outlines all you should know, organized in a straightforward table format to make it easy to reference.


2016 Silverado Oil Information

Engine TypeOil Capacity (Quarts)Recommended Oil TypeFilter TypeAverage Change Cost (USD)
4.3L V66Dexos1(r) Standard Synthetic (SAE 0W-20)ACDelco PC48E, or similar$35-$60
5.3L V88Dexos1(r) Standard Synthetic (SAE 0W-20)ACDelco and PF64 equivalent$40-$70
6.2L V88Dexos1(r) Standard Synthetic (SAE 0W-20)ACDelco PF2255, or equivalent$45-$75
5.3L EcoTec3 V88Dexos1(r) Gen2 Full Synthetic (SAE 0W-20)ACDelco PC64, or any equivalent$50-$80
6.0L L96 V88Dexos1(r) Standard Synthetic (SAE 5W-30)ACDelco PC48E, or comparable$40-$70

2016 Silverado Oil Type

2016 Silverado Oil Type

It is important to note that the 2016 Chevrolet Silverado requires a 5W-30 synthetic blend motor oil that is compatible with the GM dexos1(tm) standard. 


It is advised to use an oil that is in line with this standard for maximum performance and protection of the engine.

2016 Silverado Oil Capacity

The capacity of oil in the 2015 Chevrolet Silverado varies depending on the size of the engine And its kind. Below Are the capacities of each engine:

  • 4.3L V6: 4.5 quarts (4.26 liters)
  • 5.3L V8: 6 quarts (5.67 liters)
  • 6.2L V8: 8 quarts (7.57 liters)

If you want to be sure you’re giving your car the proper quantity of oil, check the handbook or visit a professional technician.

2016 Silverado Oil Filter

This year’s Chevrolet Silverado uses different oil filters based on engine size and type. The following are recommended filters to use for every engine.

  • 4.3L V6: ACDelco PF63E, Fram PH10060, or K&N PS-7026
  • 5.3L V8: ACDelco PF63F, Fram PH10060, or K&N PS-7026
  • 6.2L V8: ACDelco PF63G, Fram PH10060, or K&N PS-7026

It is essential to utilize an oil filter of high quality that’s compatible with your vehicle to ensure the proper filtration of your engine and protection.

2016 Silverado Oil Change Kit 

2016 Silverado Oil Change Kit


If you’re in search of an oil change kit to fit a 2016 Silverado Here are a few alternatives to think about:

  • Engine Driven Race Oil Change Kit: contains eight quarts of DI200W-20 synthetic oil and a Wix XP filter. It was designed to work in 2014. Silverado 1500 5.3L and 6.2L.
  • The BLAU Chevrolet Silverado Oil Change Kits: The kits come with the oil filter As well As the right quantity of approved Chevrolet Silverado engine oil to ensure the best oil change. The kits can be purchased for different versions that are part of the Silverado.
  • AC Delco OW-20 and PF63 Oil Change Kit: This kit is compatible with the 2014-2020 Silverado/Sierra 1500 5.3L L82/L84 V8 as well as 6.2L L87 V8. It includes 8 quarts of oil as well as one oil filter.
  • BLU Chevrolet Silverado Diesel Oil Change Kit: This kit contains 10 Liters of German fully synthetic RAVENOL NDT Nord Duty Truck SAE 5W40 Motor oil As well As the oil filter. It is specifically designed for the 2001 to 2019 Silverado 6.6L Duramax.
  • AutoZone’s full synthetic 5W-30: This is a 5-quart bottle of synthetic full-synthetic oil that can meet the specifications for the 2016 Chevy Silverado.

Check the compatibility of your oil change kit for your particular vehicle before you purchase. It is crucial to select the right oil type And capacity to ensure the best performance and long-term durability for the vehicle. 

For 2016, the Chevy Silverado 1500 will require 6.0 5W-30 quarts to run the 4.3L engine, And 8.0 1 quarts of 0W-20 to engines with 5.3L and 6.2L. 5.3L and 6.2L engines. 

2016 Silverado Oil Change

2016 Silverado Oil Capacity

To change the oil on the Chevrolet Silverado in 2016, you must follow these steps: Chevrolet Silverado, you will be required to follow these basic steps:

  1. The engine should be warmed up for A couple of minutes so that the oil flows more smoothly.
  2. Switch off the engine, then remove the hood.
  3. Locate the drain plug for oil under the engine and then place the drain pan beneath it.
  4. Unscrew the drain fitting And let the oil drain completely.
  5. Install A new drain pipe, And then ensure that it is tightened to the manufacturer’s recommended specifications.
  6. Find the oil filter, and then use an oil filter wrench to take it off. the filter.
  7. Make sure to apply A little brand-new oil onto the gasket on your new filter, And then install it by hand, securing it by the recommended torque specifications of the manufacturer.
  8. Fill the engine up with the recommended amount of oil And kind of oil.
  9. Start the engine, And then check for leaks.
  10. Shut off the engine And then check the level of oil with the dipstick. Make sure to add more oil if needed.

It’s crucial to follow the recommended interval for oil changes for your vehicle to ensure maximum engine performance and durability. 

The timing of the interval will depend on the conditions of your driving so check the owner’s manual or an experienced mechanic for assistance.

People Also Search for the 2016 Silverado oil type

2016 Silverado oil recommendation
2016 Silverado oil grade
oil for 2016 Silverado 5.3
2016 Silverado 1500 oil type
2016 Silverado oil change interval
2016 chevy Silverado oil type
2016 chevy Silverado oil capacity
2016 Silverado 1500 oil


Choosing the right oil type for your 2016 Silverado is essential to ensure optimal engine performance and longevity.

Stick to oil with A viscosity of 5W-30 and consider using synthetic oil for superior protection. Remember to change your oil regularly to keep your engine running smoothly.

For more posts visit our website: https://engineoiil-capacity.com

FAQs – 2016 Silverado oil type

What kind of oil does the 2016 Chevy Silverado take?

Every 2016 Silverado has an oil capacity of eight quarts. Furthermore, a Dexos 1 Standard Synthetic oil with a viscosity of SAE 0W-20 is generally recommended. Synthetic oils tend to cost more than conventional oils but will ensure better performance.

How many quarts of oil does a Chevy Silverado hold?

The short answer is yes, this truck can take eight quarts of oil, and it is advised to use Dexos 1 Standard Synthetic oil. As you get ready for your truck’s next oil change, discover more information on the significance of the oil type for your 2016 Silverado as well as some other information.

What kind of oil does a 2020 Chevy Silverado take?

If the oil level is below the crosshatched region on the dipstick and the engine has been off for at least 15 minutes, add 1 L (1 quart) of the required oil and then recheck the level. Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil, 5 qt., is the top-selling motor oil for the 2020 Chevrolet Silverado.

What’s the 2016 Chevy Silverado 1500 brake fluid type?

Chevy Silverado 1500 2016, Hydraulic DOT 3 Brake Fluid by ACDelco®. ACDelco offers a full range of oils, fluids, and vehicle care products to protect, enhance, and maintain your automobile. From adhesives, sealants, and cleaners to… Chevy Silverado 1500 2016, Extended Performance™ SAE 0W-20 Synthetic Motor Oil, 1 Quart by Mobil 1®.