Nissan Titan Engine Oil Capacity (USA)

Nissan Titan Engine Oil Capacity (USA) 2022

Are you looking for Nissan Titan Engine Oil Capacity? or you want to change the engine oil of Nissan Titan and don’t know how much engine oil capacity of Nissan Titan ?

Then Here you can see all information about Nissan Titan engine oil capacity, Oil change Intervals, and Service Cost. How many quarts/liters take Nissan Titan engine oil capacity for all models and variants.

Nissan Titan, TA60 (2004 – ) (USA)

	Engine	Capacity/Filter	Oil Change Intervals	Service Cost
Titan V8 (2004 – 2005)	VK56DE	6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts	7 500 miles / 6 months	303$/434$
Titan V8 (2006 – 2006)	VK56DE	6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts	7 500 miles / 6 months	303$/434$
Titan V8 (2007 – 2007)	VK56DE	6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts	7 500 miles / 6 months	303$/434$
Titan V8 (2008 – 2008)	VK56DE	6.2 l 6.55 US Quarts / Filter: 0.3 l 0.32 US Quarts	7 500 miles / 6 months	303$/434$
Titan V8 (2009 – 2012)	VK56DE	6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts	7 500 miles / 6 months	303$/434$
Titan V8 (2012 – 2013)	VK56DE	6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts	7 500 miles / 6 months	303$/434$
Titan V8 (2014 – )	VK56DE	6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts	5 000 miles / 6 months	303$/434$

Nissan Titan, TA60 MEXICO (2011 – )

	Engine	Capacity/Filter	Oil Change Intervals	Service Cost
Titan V8 (Mexico) (2011 – )	VK56DE	6.5 l 6.87 US Quarts / Filter: 0.3 l 0.32 US Quarts	6 000 miles / 6 months	411$/434$

FAQ

How many quarts of oil does my 2019 Nissan Titan take?

When the filter is installed, this engine will have an oil capacity 6.9 US-quarts. This vehicle will require synthetic 0W-20 oil, regardless of the climate.

How much oil does my 2012 Nissan Titan take?

Prefer SAE 5W-30. Capacity 6.9 quarts with filter. After refill, check oil level.

How do you reset the oil life on a 2017 Nissan Titan?

To reset the oil level on your 2017 Nissan Titan, push the display button until it switches to the odometer. After that, turn off the power. Then turn the power on again while holding down the reset button for the trip meter. This will reset the oil life.

What type of transmission fluid does a 2010 Nissan Titan take?

Fluids for the Automatic Transmission, Transfer Case and Differential Oil. If the Nissan Matic S ATF is unavailable, you can use Nissan Matic JATF.

How do you reset the oil light on a 2009 Nissan Titan?

Scroll down using the center joystick, then press ENTER on your joystick to select. Use the joystick to highlight Engine Oil and press ENTER to make selections. Use the joystick to highlight and then press ENTER for a reset.

How often should you change the oil in a Nissan Titan?

An oil change should be one of your most important and fundamental services. Synthetic oil should be changed approximately every 7,500 to 10,000 miles. Nissan recommends that your Nissan Titan oil and filter be changed every 3000-5000 miles for traditional oil.

What happens if you put too much oil in your car?

When oil is added to too much, it causes the oil level in the pan to become too high . This allows the crankshaft, a rod-like lobed rod that moves quickly, to contact the oil and essentially aerate the oil. This results in a foamy, frothy material that can’t properly lubricate your engine.

How many Litres of oil does a Nissan Sentra take?

17 quarts ( 3 liters of SAE5W-30 engine oil. This synthetic oil is highly popular because it provides optimal protection in all climates. Nissan recommends that you change this oil at least once every six months or 7,500 miles.

How Much oil will the Nissan Titan Take?

It is the 2021 Nissan Titan with the 5.6L 8-cyl engine (engine code VK56VD) that uses 6.9 Quarts (with filter) of zero-w-20 synthetic oil. An oil filter replacement, as well as the crush washer, are required.

It is estimated that the 2014 Nissan Titan requires 6.8 quarts of engine oil. Nissan suggests that you use 5W-30 oil. After changing the filter and oil make sure that the oil is in that “H” line on the dipstick prior to beginning the engine.

After confirming the level of oil then start the engine. Allow it to run for two minutes. Then, turn the engine down, allow the oil to rest for a few minutes, and then check again and add the amount required to get to that “H” level.